{"title":"Dayliff","description":"\u003cp\u003eProducts in our range from the Dayliff brand.\u003c\/p\u003e","products":[{"product_id":"dayliff-ddw-750v-vortex-submersible-drainage-pump","title":"Dayliff DDW 750V Vortex Submersible Drainage Pump","description":"\u003cp\u003eSilt, leaves and fibrous debris defeat most small drainage pumps. The Dayliff DDW 750V answers that with a vortex impeller, which spins the liquid rather than passing it through a tight impeller passage, so solids travel through the pump instead of blocking it. It is the version of the DDW range to specify for dirty sumps, pond bottoms, drainage channels and post storm clean up.\u003c\/p\u003e\u003cp\u003eThe pump casing, suction base and impeller are moulded from high strength engineering plastic for corrosion resistance and easy handling. An external float switch is provided for automatic operation, and the union connected outlet accepts a threaded or hose connection. Ten metres of waterproof power cable are included. Power comes from an integral non-overloading induction motor built for continuous operation, with a thermal cut-out in the winding, connected directly to a single phase supply through a 10A fuse or MCB.\u003c\/p\u003e\u003cp\u003eCommon applications are site and basement dewatering, emptying silted tanks and ponds, fountain and water feature service, and general transfer of water that carries a solids load.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum particle size:\u003c\/strong\u003e 35mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 385mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 6kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpeller:\u003c\/strong\u003e vortex type for water with higher silt loads\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply:\u003c\/strong\u003e 1x240V, 2900rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure class:\u003c\/strong\u003e IPX8, insulation class F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum fluid temperature:\u003c\/strong\u003e +35°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum operating depth:\u003c\/strong\u003e 7m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable:\u003c\/strong\u003e 10m waterproof power cable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183210299463,"sku":"DAYLIFF-DDW-750V","price":10840.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_DDW_750V_000634.jpg?v=1789024139"},{"product_id":"dayliff-treated-water-ro-reverse-osmosis-treatment-unit","title":"Dayliff Treated Water RO Reverse Osmosis Treatment Unit","description":"\u003cp\u003eReverse osmosis strips dissolved salts from water by forcing it through a semi-permeable membrane under pressure, leaving treated water on one side and a concentrate stream running to drain. The Dayliff treated water RO unit brings membrane, pre-filtration, pump and controls together for sites where borehole or municipal water is too saline or too high in dissolved solids to drink.\u003c\/p\u003e\u003cp\u003eBottling operations, clinics, schools, hotels and households use plant of this kind. Sound pre-treatment and periodic membrane cleaning keep both output quality and recovery steady.\u003c\/p\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183214919751,"sku":"DAYLIFF-TREATED-WATER-RO","price":73650.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_TREATED_WATER_RO_000661.jpg?v=1789024189"},{"product_id":"dayliff-ddp-60e-econo-peripheral-water-pump-0-37kw","title":"Dayliff DDP 60E Econo Peripheral Water Pump 0.37kW","description":"\u003cp\u003ePeripheral pumps develop useful pressure from a small motor, and the Dayliff DDP 60E is the Econo build in that family, supplied in the familiar yellow colour. It is meant for small scale domestic and commercial water supply, where a modest flow at reasonable pressure is what the installation actually needs.\u003c\/p\u003e\u003cp\u003eThe pump body is cast iron with a brass impeller, and the specification includes copper windings and stainless steel housing inserts that keep the impeller turning freely. Close coupling to a TEFC electric motor designed for continuous operation keeps the unit compact, and a thermal cutout protects against electrical overload. The pump handles thin, clean, chemically non aggressive liquids without solid particles or fibres, so it should be kept off silty water.\u003c\/p\u003e\u003cp\u003eIt is used for boosting taps and showers, filling roof tanks from ground storage, and general small scale supply in houses, flats and shops.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 0.37 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent:\u003c\/strong\u003e 1.8 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInlet and outlet:\u003c\/strong\u003e 1 inch and 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 254 x 118 x 150 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.4 kg\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183217803335,"sku":"DAYLIFF-DDP-60-E-ECONO-YELLOW","price":5420.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_DDP_60_E_ECONO_YELLOW_000663.jpg?v=1789024208"},{"product_id":"dayliff-auto-pump-controller-for-domestic-water-pumps","title":"Dayliff Auto Pump Controller for Domestic Water Pumps","description":"\u003cp\u003eAn automatic pump controller starts and stops a pump in response to demand, so that a household or small commercial supply behaves like mains water rather than something a person has to switch on.\u003c\/p\u003e\u003cp\u003eThe Dayliff auto controller wires in between the supply and a single phase pump. Opening a tap drops the pressure in the delivery line, the controller calls the pump, and once the taps are closed it shuts the pump down again.\u003c\/p\u003e\u003cp\u003eIt suits booster and transfer sets on domestic and light commercial installations, particularly where a pressure tank on its own would leave the pump cycling too often.\u003c\/p\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183219441735,"sku":"DAYLIFF-AUTO-CONTROLLER","price":4440.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_AUTO_CONTROLLER_000605.jpg?v=1789024276"},{"product_id":"dayliff-brio-pump-controller-for-automatic-pump-switching","title":"Dayliff Brio Pump Controller for Automatic Pump Switching","description":"\u003cp\u003eBrio controllers are the pressure and flow switches most often fitted to Dayliff booster and transfer pumps to give fully automatic operation. The unit mounts on the pump discharge and carries the pump's own supply through it.\u003c\/p\u003e\u003cp\u003eWhen a tap or valve opens, pressure in the line falls and the controller energises the pump. When flow stops, it switches the pump off again. It also watches for the case where the pump is running but no water is moving, and cuts power rather than letting the pump work dry.\u003c\/p\u003e\u003cp\u003eTypical installations are domestic pressure sets, tank to house transfer and small irrigation supplies.\u003c\/p\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183219507271,"sku":"DAYLIFF-BRIO-CONTROLLER","price":11460.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_BRIO_CONTROLLER_000608.jpg?v=1789024276"},{"product_id":"dayliff-compact-ro-reverse-osmosis-water-purifier","title":"Dayliff Compact RO Reverse Osmosis Water Purifier","description":"\u003cp\u003eReverse osmosis takes dissolved salts out of water by forcing it through a semi permeable membrane under pressure, leaving sodium, calcium, chlorides and fluoride behind in a reject stream. It is the process used where water is safe in principle but too saline or too hard to drink comfortably.\u003c\/p\u003e\u003cp\u003eThe Dayliff Compact RO is a packaged unit for point of use and small point of entry duty, sized for a single outlet or a small distribution point rather than a whole building.\u003c\/p\u003e\u003cp\u003eIt suits homes, offices, clinics, salons and small food premises supplied from brackish boreholes.\u003c\/p\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183219540039,"sku":"DAYLIFF-COMPACT-RO","price":38800.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_COMPACT_RO_000609.jpg?v=1789024277"},{"product_id":"dayliff-d3sp1-14-submersible-borehole-pump-0-37kw","title":"Dayliff D3SP1-14 Submersible Borehole Pump 0.37kW","description":"\u003cp\u003eThe Dayliff D3SP1-14 is a compact three inch submersible multistage centrifugal pump built for small scale water supply from boreholes and wells. It is the lighter of the two D3SP1 models, which makes it the sensible pick for a modest household draw or a garden and stock supply where a narrow borehole rules out a larger diameter pump.\u003c\/p\u003e\u003cp\u003eImpellers and diffusers are engineering plastic, the inlet and outlet chambers brass, and the pump sleeve stainless steel. Behind the wet end sits a sealed two pole motor with copper windings, built principally from stainless steel. A separate control unit is included, carrying an isolator, run indicator light, thermal overload protection and a start capacitor, and it connects directly to mains power. Dayliff recommends adding an AVS or similar power protection controller where the mains supply fluctuates.\u003c\/p\u003e\u003cp\u003eDuties include domestic borehole and well supply, shallow abstraction on smallholdings, and filling storage tanks for gravity distribution.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 0.37 kW (0.55 HP)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum current:\u003c\/strong\u003e 3.3 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump diameter:\u003c\/strong\u003e 76 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 12 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 2900 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply:\u003c\/strong\u003e 1 x 240 V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure class:\u003c\/strong\u003e IP68, insulation class B\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable supplied:\u003c\/strong\u003e 20 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum working pressure:\u003c\/strong\u003e 35 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum borehole diameter:\u003c\/strong\u003e 100 mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183219605575,"sku":"DAYLIFF-D3SP1-14","price":33630.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_D3SP1_14_000610.jpg?v=1789024278"},{"product_id":"dayliff-dg-1200p-portable-petrol-generator-for-standby-power","title":"Dayliff DG 1200P Portable Petrol Generator for Standby Power","description":"\u003cp\u003eSmall enough to move between jobs and simple enough for daily use, the Dayliff DG 1200P belongs to the DG-P range of portable petrol generators built for mains standby duty and for supplying power on remote sites. It suits lighting, small tools, a few household circuits and other modest loads where a fixed supply is absent or unreliable.\u003c\/p\u003e\u003cp\u003eThe DG-P design is built around a reliable, economical air cooled OHV petrol engine fitted with a large exhaust and air cleaner to keep running noise down, driving a high efficiency square core alternator for consistent AC output. A strong tubular frame protects the set in transit, an integrated control panel groups the operating controls, and over current protection is of the fuseless type, so there are no fuses to source after a trip. Unlike larger sets in the range, this model is not fitted with the oil alert system that stops the engine on low oil level, so the oil level should be checked as part of the pre start routine.\u003c\/p\u003e\u003cp\u003eHouseholds, shops, workshops and site offices use generators of this size for standby lighting and power, while contractors keep them for tools and instruments away from the grid.\u003c\/p\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183222685767,"sku":"DAYLIFF-DG-1200P","price":37810.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_DG_1200P_000635.jpg?v=1789024396"},{"product_id":"dayliff-dg-3000e-economy-portable-petrol-generator","title":"Dayliff DG 3000E Economy Portable Petrol Generator","description":"\u003cp\u003eThe E suffix on the Dayliff DG 3000E marks it as an economy model within the DG-P portable petrol generator range, a lower cost set aimed at lighter applications rather than heavy continuous service. It provides AC power for mains standby at homes and small premises and for remote sites with no grid connection.\u003c\/p\u003e\u003cp\u003eLike the rest of the range, it uses an economical air cooled OHV petrol engine with a large exhaust and air cleaner for quieter running, coupled to a high efficiency square core alternator that gives consistent AC output. The set is carried in a strong tubular frame, the operating controls are grouped on an integrated control panel, and over current protection is fuseless, so a trip is reset rather than replaced. The DC output option offered on other DG-P models is not provided on this version, which is supplied for AC duty only.\u003c\/p\u003e\u003cp\u003eBuyers typically use a set of this class for lighting and small appliances during outages, for shop and kiosk supply, and for tools and site huts where power has yet to be connected.\u003c\/p\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183222751303,"sku":"DAYLIFF-DG-3000E","price":42740.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_DG_3000E_000636.jpg?v=1789024397"},{"product_id":"dayliff-dg-3000p-portable-petrol-generator-for-standby-power","title":"Dayliff DG 3000P Portable Petrol Generator for Standby Power","description":"\u003cp\u003eThe Dayliff DG 3000P is a petrol driven portable generator supplied for mains standby and remote site power. Sets of this type carry a petrol engine and alternator on a frame that can be lifted or wheeled between jobs, with the starting and output controls grouped on a single panel and sockets provided for direct connection of loads.\u003c\/p\u003e\u003cp\u003eHomes, shops, salons, site offices and small workshops use a portable generator of this class to keep lighting, refrigeration, computers and hand tools running during outages, or to work in locations that the grid has not reached.\u003c\/p\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183222784071,"sku":"DAYLIFF-DG-3000P","price":50870.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_DG_3000P_000637.jpg?v=1789024397"},{"product_id":"dayliff-dg-5000p-portable-petrol-generator-for-site-power","title":"Dayliff DG 5000P Portable Petrol Generator for Site Power","description":"\u003cp\u003eMains standby and remote site supply are the duties the Dayliff DG-P range is designed around, and the DG 5000P sits in its middle ground, above the small portable sets and below the larger trolley mounted and canopied units. It is intended for premises and sites that need to run several circuits or a group of tools rather than a single appliance.\u003c\/p\u003e\u003cp\u003eThe range is built on economical air cooled OHV petrol engines with large exhausts and air cleaners for lower noise, driving high efficiency square core alternators for consistent AC output. A strong tubular frame carries the set, an integrated control panel brings the operating controls together, over current protection is of the fuseless type, and an oil alert system shuts the engine down should the oil level fall. A high capacity fuel tank supports extended running between refills.\u003c\/p\u003e\u003cp\u003eTypical users are shops and small businesses covering outages, contractors powering tools and site accommodation, farms running workshops and stores, and event operators needing temporary supply.\u003c\/p\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183222849607,"sku":"DAYLIFF-DG-5000P","price":100250.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_DG_5000P_000638.jpg?v=1789024398"},{"product_id":"dayliff-dg-7500p-portable-petrol-generator-for-standby-power","title":"Dayliff DG 7500P Portable Petrol Generator for Standby Power","description":"\u003cp\u003eLarger premises and busier sites need a set that can carry several loads at once, and the Dayliff DG 7500P is the upper end of the DG-P portable petrol generator range. It is specified for mains standby where an outage must not stop work, and for remote sites operating without a grid connection.\u003c\/p\u003e\u003cp\u003eConstruction follows the DG-P pattern: an economical air cooled OHV petrol engine with a large exhaust and air cleaner for low noise operation, driving a high efficiency square core alternator that holds a consistent AC output. The set is mounted in a strong tubular frame, over current protection is fuseless, and an integrated control panel gathers the operating controls for convenience. An oil alert system stops the engine if the oil level falls, and a high capacity fuel tank allows extended operation between refills.\u003c\/p\u003e\u003cp\u003eBusinesses, guest houses, clinics, farms and contractors use generators of this class for standby supply to lighting, refrigeration, pumps and office equipment, and for powering tools on sites away from mains power.\u003c\/p\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183222915143,"sku":"DAYLIFF-DG-7500P","price":107150.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_DG_7500P_000639.jpg?v=1789024398"},{"product_id":"dayliff-dg-950p-portable-petrol-generator-for-light-loads","title":"Dayliff DG 950P Portable Petrol Generator for Light Loads","description":"\u003cp\u003eEntry point to the Dayliff DG-P range, the DG 950P is a compact portable petrol generator for standby lighting and small appliances at homes, kiosks and small business premises, and for basic power at locations the grid has not reached.\u003c\/p\u003e\u003cp\u003eAn economical air cooled OHV petrol engine with a large exhaust and air cleaner keeps running noise moderate, and it drives a high efficiency square core alternator for consistent AC output. The set sits in a strong tubular frame that stands up to being moved regularly, its controls are grouped on an integrated control panel, and over current protection is of the fuseless type. Two features found on larger DG-P sets are not included at this size: there is no oil alert system to stop the engine on low oil, and the fuel tank is not the high capacity type, so oil level and fuel should both be checked before each run.\u003c\/p\u003e\u003cp\u003eLoads it is commonly asked to carry include lights, phone and battery charging, a television, a small fridge and light hand tools.\u003c\/p\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183222947911,"sku":"DAYLIFF-DG-950P","price":22300.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_DG_950P_000640.jpg?v=1789024399"},{"product_id":"dayliff-dlv7p-petrol-engine-for-engine-driven-pumps","title":"Dayliff DLV7P Petrol Engine for Engine Driven Pumps","description":"\u003cp\u003eThe Dayliff DLV7P is a petrol engine supplied as the power unit for engine driven equipment. Engines of this type are bought either to replace a worn or damaged engine on an existing pump set, keeping the pump end and frame in service, or as a spare held against downtime in the middle of an irrigation or dewatering season.\u003c\/p\u003e\u003cp\u003ePump dealers, borehole contractors, farmers and hire operators keep petrol engines on hand for exactly this reason, since an engine change is usually quicker and cheaper than replacing a complete machine. Matching the engine to the pump mounting, shaft and duty before ordering is advised.\u003c\/p\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183223013447,"sku":"DAYLIFF-DLV7P-ENGINE","price":16750.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_DLV7P_ENGINE_000641.jpg?v=1789024399"},{"product_id":"dayliff-d3sp1-27-submersible-borehole-pump-0-75kw","title":"Dayliff D3SP1-27 Submersible Borehole Pump 0.75kW","description":"\u003cp\u003eHouseholds on a borehole that needs a little more lift than the smallest pump will give are the market for the Dayliff D3SP1-27. It is the higher rated of the two D3SP1 models, a slim three inch submersible multistage centrifugal pump intended for small scale supplies from boreholes and wells.\u003c\/p\u003e\u003cp\u003eWet end construction is engineering plastic impellers and diffusers with brass inlet and outlet chambers inside a stainless steel pump sleeve. The pump is coupled to a sealed two pole motor with copper windings, itself built mainly from stainless steel. Cable and a separate control unit are supplied with every pump, the control unit carrying an isolator, run indicator light, thermal overload protection and a start capacitor for direct connection to mains power. Where voltage swings are a known problem, Dayliff advises fitting an AVS or similar power protection controller as well.\u003c\/p\u003e\u003cp\u003eIt is used for domestic and small institutional borehole supply, well abstraction on farms, and tank filling ahead of gravity distribution.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 0.75 kW (1 HP)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum current:\u003c\/strong\u003e 6.3 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 14 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 2900 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply:\u003c\/strong\u003e 1 x 240 V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure class:\u003c\/strong\u003e IP68, insulation class B\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable supplied:\u003c\/strong\u003e 20 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum working pressure:\u003c\/strong\u003e 35 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum borehole diameter:\u003c\/strong\u003e 100 mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183227142215,"sku":"DAYLIFF-D3SP1-27","price":37440.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_D3SP1_27_000611.jpg?v=1789024508"},{"product_id":"dayliff-db-2s30-water-pump-for-water-supply-duties","title":"Dayliff DB 2S30 Water Pump for Water Supply Duties","description":"\u003cp\u003eThe Dayliff DB 2S30 is stocked under the factory code that identifies it within the Dayliff pump range. Like the rest of that range it is intended for water supply duty, lifting water from a source and delivering it to storage or on to a distribution point on a domestic, agricultural or light commercial site.\u003c\/p\u003e\u003cp\u003eNo performance figures are quoted on this page for this code. Anyone matching the pump to a known duty should check the head, flow, motor rating and connection sizes against the current Dayliff datasheet or the pump's own model plate before ordering.\u003c\/p\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183227207751,"sku":"DAYLIFF-DB-2S30","price":45200.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_DB_2S30_000612.jpg?v=1789024508"},{"product_id":"dayliff-dc-50e-econo-self-priming-engine-pump","title":"Dayliff DC 50E Econo Self Priming Engine Pump","description":"\u003cp\u003eDayliff's DC range covers self priming engine pumps of fully portable design, built for irrigation, dewatering and general water transfer where there is no mains power at the water's edge. The DC 50E sits within that range and carries the E suffix Dayliff uses for its Econo specification, which is assembled from different components and is recommended for lighter duties and shorter operating periods rather than continuous daily pumping.\u003c\/p\u003e\u003cp\u003eAcross the range the pump body and impellers are cast from high grade aluminium, and the impeller is of open type so that lightly silted water passes through without choking the pump. A sturdy frame carries the unit and shields the engine, and quick couple hose connectors and a suction strainer are supplied with the pump. Power comes from an air cooled single cylinder overhead valve engine with transistorised ignition and an oil alert.\u003c\/p\u003e\u003cp\u003eTypical work is furrow and sprinkler irrigation on smallholdings, emptying flooded excavations, filling site and farm tanks, and moving water between storage points.\u003c\/p\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183227240519,"sku":"DAYLIFF-DC-50E","price":22300.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_DC_50E_000613.jpg?v=1789024509"},{"product_id":"dayliff-dc-50p-portable-self-priming-engine-pump","title":"Dayliff DC 50P Portable Self Priming Engine Pump","description":"\u003cp\u003eWhere there is no power at the abstraction point, an engine pump does the work, and the Dayliff DC range is built for exactly that. The DC 50P is supplied from within this family of self priming, high flow, fully portable pumps designed around irrigation, dewatering and general transfer duties.\u003c\/p\u003e\u003cp\u003eEvery pump in the range runs an open impeller, so lightly silted water can be handled without the blockages a closed impeller would suffer. Body and impellers are cast from high grade aluminium, and the whole unit sits inside a carrying and protection frame. Quick couple hose connectors and a suction strainer come with the pump. Power is an air cooled single cylinder overhead valve engine with transistorised ignition and built in oil alert. Dayliff notes that running any of these engines at full governed speed should be kept to short spells, with the throttle eased back for extended duty and pump output falling accordingly.\u003c\/p\u003e\u003cp\u003eIt suits sprinkler and furrow irrigation, draining trenches and excavations, and filling storage tanks off grid.\u003c\/p\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183227306055,"sku":"DAYLIFF-DC-50P","price":26110.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_DC_50P_000614.jpg?v=1789024510"},{"product_id":"dayliff-dc-80p-portable-self-priming-engine-pump","title":"Dayliff DC 80P Portable Self Priming Engine Pump","description":"\u003cp\u003eVolume rather than pressure is what the Dayliff DC range is built to deliver, and the DC 80P is supplied from within that family of self priming, fully portable engine pumps. The range is aimed at irrigation, dewatering and general water movement on farms, estates and construction sites where mains power does not reach the source.\u003c\/p\u003e\u003cp\u003eConstruction follows the family pattern: high grade cast aluminium body and impellers, an open impeller that tolerates lightly silted water, and a sturdy frame that both carries the pump and protects the engine. Quick couple hose connectors and a suction strainer are included. The engine is an air cooled single cylinder overhead valve design with transistorised ignition and built in oil alert. For long spells of work Dayliff advises winding the throttle back from maximum governed speed, trading some output for engine life.\u003c\/p\u003e\u003cp\u003eRegular duties are field and orchard irrigation, clearing water out of excavations and drains, and bulk transfer between tanks and reservoirs.\u003c\/p\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183227338823,"sku":"DAYLIFF-DC-80P","price":31900.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_DC_80P_000615.jpg?v=1789024510"},{"product_id":"dayliff-dcx1-50p-high-pressure-petrol-engine-pump","title":"Dayliff DCX1 50P High Pressure Petrol Engine Pump","description":"\u003cp\u003eHead, not just flow, is what the Dayliff DCX range is designed around. These portable pumps use a self priming closed impeller centrifugal layout aimed at high head water transfer, fire fighting and irrigation, and the DCX1 50P is the petrol engined, single impeller build within it.\u003c\/p\u003e\u003cp\u003ePumps in the range are fitted with either one or two impellers, giving medium or high pressure performance, and the body and impellers are cast from high grade aluminium. Quick couple suction and inlet connectors and a strainer are supplied, and the pump sits in a sturdy carrying and protection frame. The petrol option is an air cooled single cylinder overhead valve engine with transistorised ignition, built in oil alert and recoil start. Dayliff notes that published performance curves assume the governor set for maximum rated power; for extended duty the throttle should be reduced to about three quarters, with output reduced to match.\u003c\/p\u003e\u003cp\u003eApplications include pumping uphill to elevated tanks, estate fire fighting reserves, sprinkler irrigation that needs pressure at the nozzle, and long delivery runs.\u003c\/p\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183227404359,"sku":"DAYLIFF-DCX1-50P","price":42490.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_DCX1_50P_000616.jpg?v=1789024511"},{"product_id":"dayliff-dq-15f-circulator-pump-with-flow-switch-120w","title":"Dayliff DQ 15F Circulator Pump with Flow Switch 120W","description":"\u003cp\u003eWeak shower pressure and slow hot water delivery are the problems the Dayliff DQ 15F is bought to solve. It is a single speed circulator pump with a built-in flow switch, so the pump starts whenever there is demand at the outlet and stops when the tap closes, without a separate pressure switch or controller. Alongside shower boosting it is used for hot water circulation in heating, hot water, cooling and air conditioning systems, whether open or closed, and for circulation in solar hot water installations.\u003c\/p\u003e\u003cp\u003eThe pump housing is cast iron, the impeller is glass fibre reinforced polypropylene, and the rotor is stainless steel running in a ceramic bearing support, a combination chosen for long service in hot water. Female threaded BSP union connections are supplied, which makes fitting into existing pipework straightforward. The integral asynchronous squirrel cage motor includes a capacitor and overload protection and connects directly to the mains through a 5A fuse or MCB. Pumps must be installed with the rotor shaft horizontal.\u003c\/p\u003e\u003cp\u003ePlumbers fit the DQ 15F in houses, flats, guest houses and small hotels, on shower lines, hot water loops and solar systems.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 120W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent:\u003c\/strong\u003e 0.55A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInlet and outlet:\u003c\/strong\u003e ¾ inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 160mm length, 105.5mm height, 144mm width\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply:\u003c\/strong\u003e 1x240V, 2900rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure class:\u003c\/strong\u003e IP54, insulation class F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum operating pressure:\u003c\/strong\u003e 6 bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFluid temperature range:\u003c\/strong\u003e -10°C to 110°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmbient temperature range:\u003c\/strong\u003e 10°C to 50°C\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183229042759,"sku":"DAYLIFF-DQ15F","price":11700.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_DQ15F_003675.jpg?v=1789024568"},{"product_id":"dayliff-ds-2-9-borehole-pump-with-motor-and-control-box","title":"Dayliff DS 2\/9 Borehole Pump with Motor and Control Box","description":"\u003cp\u003eSupplied complete with its capacitor start winding motor and matching control box, the Dayliff DS 2\/9 is a submersible pump from the DS 2 series, designed specifically for borehole water supply. The 2 series is the narrow, low flow end of the DS range, suited to domestic and small institutional boreholes where a steady daily supply matters more than volume.\u003c\/p\u003e\u003cp\u003eThe pump is of multistage centrifugal impeller design, and its parts are made from stainless steel with water lubricated rubber bearings, a construction chosen to resist the corrosion and wear of continuous immersion. A submersible motor sits beneath the pump, with suction taken through a strainer between the two, and the motor itself is a sealed, liquid cooled, oil filled asynchronous squirrel cage type in stainless steel. Because this is a single phase set, the purpose designed control box is included; it houses the starting and protection components and connects to the mains supply. A Dayliff electronic pump controller is recommended alongside it for fuller protection against dry running, motor overload and irregular power supply.\u003c\/p\u003e\u003cp\u003eInstallers specify pumps of this series for homes, schools, clinics, guest houses and smallholdings drawing from a drilled borehole or deep well.\u003c\/p\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183229108295,"sku":"DAYLIFF-DS-2S9-CSW-MOTOR-CNTRL-BOX","price":58750.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_DS_2S9_CSW_MOTOR_CNTRL_BOX_000642.jpg?v=1789024569"},{"product_id":"dayliff-ds-5-8-borehole-pump-with-motor-and-control-box","title":"Dayliff DS 5\/8 Borehole Pump with Motor and Control Box","description":"\u003cp\u003eBoreholes serving a household, a farm or a small institution are the work the Dayliff DS 5\/8 is built for. It comes as a set: the submersible pump, its capacitor start winding motor and the purpose designed control box that a single phase installation requires. The 5 series carries a higher flow than the 2 series at a given head, which suits properties with storage tanks to fill or several draw off points.\u003c\/p\u003e\u003cp\u003eConstruction is multistage centrifugal, with all pump parts in stainless steel and water lubricated rubber bearings. The motor mounts beneath the pump and is a sealed, liquid cooled asynchronous squirrel cage design, also in stainless steel, with suction drawn through a strainer between motor and pump. The control box provides the starting and protective components and wires directly to the mains. For fuller protection, Dayliff recommends adding an electronic pump controller, which covers wireless low level detection, motor overload and irregular power supply.\u003c\/p\u003e\u003cp\u003eBorehole drillers, plumbers and farm managers install pumps of this series for domestic supply, livestock watering, irrigation storage and small commercial premises.\u003c\/p\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183229173831,"sku":"DAYLIFF-DS-5S8-CSW-MOTOR-CNTRL-BOX","price":62200.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_DS_5S8_CSW_MOTOR_CNTRL_BOX_000643.jpg?v=1789024570"},{"product_id":"dayliff-dsd-0-37kw-submersible-borehole-water-pump","title":"Dayliff DSD 0.37kW Submersible Borehole Water Pump","description":"\u003cp\u003eThis is a Dayliff DSD submersible pump rated at 0.37kW, the smallest motor size in the DSD family. The DSD range is a multistage centrifugal design made for domestic and small scale water supply drawn from wells and boreholes, lowered into the water on a rising main and left permanently submerged.\u003c\/p\u003e\u003cp\u003eA pump at this rating suits shallower installations and modest daily demand, such as a household drawing to a storage tank, a kitchen garden or a small livestock trough. Single phase pumps of this type are operated through a control box, which provides starting and protection against overload and dry running.\u003c\/p\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183229206599,"sku":"DAYLIFF-DSD-0-37-KW","price":25870.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_DSD_0_37_KW_000644.jpg?v=1789024571"},{"product_id":"dayliff-dsd-0-75kw-submersible-borehole-water-pump","title":"Dayliff DSD 0.75kW Submersible Borehole Water Pump","description":"\u003cp\u003eRated at 0.75kW, this Dayliff DSD submersible pump sits in the middle of the smaller DSD sizes. The DSD range uses a multistage centrifugal design and is made for domestic and small scale water supply from wells and boreholes, running fully submerged below the water level on a rising main.\u003c\/p\u003e\u003cp\u003eHomes with a storage tank to fill, guest houses, small farms and market gardens are the usual buyers at this rating, where the extra power over the smallest models is needed for a deeper setting or a longer delivery run. A control box provides starting and protection for single phase installations.\u003c\/p\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183229239367,"sku":"DAYLIFF-DSD-0-75-KW","price":30790.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_DSD_0_75_KW_000645.jpg?v=1789024571"},{"product_id":"dayliff-dsd-1-1kw-submersible-borehole-water-pump","title":"Dayliff DSD 1.1kW Submersible Borehole Water Pump","description":"\u003cp\u003eAt 1.1kW, this Dayliff DSD submersible pump is the larger of the common domestic sizes in the DSD range. The range is of multistage centrifugal design, built for water supply from wells and boreholes, and the pump operates fully submerged, pushing water up a rising main to storage or straight into the distribution line.\u003c\/p\u003e\u003cp\u003eDeeper boreholes, longer pipe runs and premises with several draw off points are where this rating earns its place, which typically means larger homes, farms, schools and small institutions. Single phase installations use a control box for starting and for protection against overload and dry running.\u003c\/p\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183229272135,"sku":"DAYLIFF-DSD-1-1-KW","price":37200.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_DSD_1_1_KW_000646.jpg?v=1789024572"},{"product_id":"dayliff-dsd-3-10-submersible-borehole-pump-0-55kw","title":"Dayliff DSD 3\/10 Submersible Borehole Pump 0.55kW","description":"\u003cp\u003eThe Dayliff DSD 3\/10 is a submersible multistage centrifugal pump for domestic and small scale water supply from wells and boreholes. It is one of the sizes supplied complete with 30m of cable and a control box, so a straightforward household installation can be completed without sourcing those parts separately.\u003c\/p\u003e\u003cp\u003eMaterials are chosen with sandy water in mind. Impellers and diffusers are polycarbonate, the delivery and suction chambers are cast iron, and the pump housing, shaft and shaft coupling are AISI 304 stainless steel; the polycarbonate impellers in particular give the range its sand handling ability and long life. The pump is coupled to a sealed, liquid cooled asynchronous squirrel cage motor in stainless steel. Single phase units run through a Dayliff SCM control box for operation and for protection against overload, dry running and over or under voltage, while three phase units take a remote DOL starter, with a Dayliff SCT electronic pump controller recommended for comprehensive control.\u003c\/p\u003e\u003cp\u003eHomes, guest houses, schools, clinics and smallholdings across the region use pumps of this size to draw borehole water into storage tanks and household distribution.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor rating:\u003c\/strong\u003e 0.55kW, 0.75HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent:\u003c\/strong\u003e 5.2A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 482mm pump length, 801mm overall length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 11kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 2850rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure class:\u003c\/strong\u003e IP68, insulation class B\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum water temperature:\u003c\/strong\u003e +35°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum immersion depth:\u003c\/strong\u003e 150m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum sand content:\u003c\/strong\u003e 0.25%\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183229304903,"sku":"DAYLIFF-DSD-3S10","price":29190.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_DSD_3S10_000647.jpg?v=1789024573"},{"product_id":"dayliff-dcx2-50p-high-pressure-petrol-engine-pump","title":"Dayliff DCX2 50P High Pressure Petrol Engine Pump","description":"\u003cp\u003eA second impeller is what separates the DCX2 from the single impeller build in Dayliff's DCX range of portable high pressure pumps. The DCX2 50P is the petrol engined version, aimed at the high head end of the range's work: lifting water to elevated storage, fire fighting and pressurised irrigation.\u003c\/p\u003e\u003cp\u003eThe pumps are of self priming closed impeller centrifugal design, with body and impellers cast from high grade aluminium. Quick couple suction and inlet connectors and a strainer are supplied, and the unit is mounted in a sturdy carrying and protection frame. Petrol models use an air cooled single cylinder overhead valve engine with transistorised ignition, built in oil alert and recoil start. Dayliff points out that its performance curves assume the governor set for maximum rated power, and that for extended duty the throttle should be wound back to roughly three quarters, with performance reduced accordingly.\u003c\/p\u003e\u003cp\u003eIt is used for high head transfer to hilltop tanks, fire fighting reserves, and irrigation lines that need pressure at the sprinkler.\u003c\/p\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183233564743,"sku":"DAYLIFF-DCX2-50P","price":47540.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_DCX2_50P_000617.jpg?v=1789024659"},{"product_id":"dayliff-dda-1200c2-submersible-well-pump-0-92kw","title":"Dayliff DDA 1200C2 Submersible Well Pump 0.92kW","description":"\u003cp\u003eTwin mechanical seals and a jacketed motor make the Dayliff DDA 1200C2 a steady performer on domestic and light duty abstraction from wells, tanks and boreholes. It is a submersible multistage centrifugal pump for clean, non aggressive water, and the jacketed motor arrangement cools well enough that the pump can work semi submerged.\u003c\/p\u003e\u003cp\u003eImpellers and diffusers are polypropylene and the casing is stainless steel. The mechanical seals sit in an intermediate oil chamber, in a twin arrangement on this model, which is the detail that lifts its reliability over the simpler pumps in the range. A low level float switch on an adjustment clamp and an inbuilt capacitor are fitted as standard, keeping installation straightforward, and a pressure controller can be added where automatic operation is wanted.\u003c\/p\u003e\u003cp\u003eWell and tank abstraction is the natural fit, though the pump also covers water transfer, small irrigation lines and pressure boosting as an alternative to a dry mounted surface pump.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 0.92 kW (1.2 HP)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum current:\u003c\/strong\u003e 6.5 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 18 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeals:\u003c\/strong\u003e twin mechanical seals in an intermediate oil chamber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpellers and diffusers:\u003c\/strong\u003e polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCasing:\u003c\/strong\u003e stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable supplied:\u003c\/strong\u003e 20 m\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183233597511,"sku":"DAYLIFF-DDA-1200C2","price":29680.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_DDA_1200C2_000618.jpg?v=1789024660"},{"product_id":"dayliff-dda-600c-submersible-well-pump-0-55kw-0-75hp","title":"Dayliff DDA 600C Submersible Well Pump 0.55kW 0.75HP","description":"\u003cp\u003eSmall households and light duty abstraction are what the Dayliff DDA 600C is built around. The pump is a submersible multistage centrifugal unit for clean, non aggressive water, drawing from wells and boreholes or from storage tanks, and its jacketed motor allows it to run semi submerged where water levels are low.\u003c\/p\u003e\u003cp\u003ePolypropylene impellers and diffusers run inside a stainless steel casing. Like the larger twin sealed model in the range, this pump uses two mechanical seals in an intermediate oil chamber rather than one, which is worth having where the pump will be started and stopped often. It arrives with a low level float switch on an adjustment clamp and an inbuilt capacitor, so wiring is simple, and cable is supplied with the pump. A pressure controller can be fitted for automatic operation.\u003c\/p\u003e\u003cp\u003eIt is used for well and tank abstraction, transferring water between storage points, small irrigation and modest pressure boosting.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 0.55 kW (0.75 HP)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum current:\u003c\/strong\u003e 5.9 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 15 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeals:\u003c\/strong\u003e twin mechanical seals in an intermediate oil chamber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpellers and diffusers:\u003c\/strong\u003e polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCasing:\u003c\/strong\u003e stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable supplied:\u003c\/strong\u003e 20 m\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183233663047,"sku":"DAYLIFF-DDA-600C","price":23770.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_DDA_600C_000619.jpg?v=1789024660"},{"product_id":"dayliff-dda-900c-submersible-borehole-pump-0-9kw","title":"Dayliff DDA 900C Submersible Borehole Pump 0.9kW","description":"\u003cp\u003eOf the DDA submersible pumps, the DDA 900C is the one Dayliff points at borehole work. It is a multistage centrifugal pump for clean, non aggressive water, with the jacketed motor arrangement the range is known for, giving good cooling and allowing the pump to run semi submerged.\u003c\/p\u003e\u003cp\u003eImpellers and diffusers are polypropylene, the casing stainless steel, and mechanical seals sit in an intermediate oil chamber. Rather than the float switch fitted to the well and tank models, this pump is supplied with an external control box carrying an isolator, run indicator light, thermal overload protection and a starting capacitor, wired directly to mains power. The box also has auxiliary terminals for control probes, a pressure switch or a float switch, so the pump can be automated to suit the installation. Cable is supplied with the pump.\u003c\/p\u003e\u003cp\u003eIt suits domestic and institutional borehole supply, deeper wells, tank filling and pressure boosting where a dry mounted pump would struggle on suction.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 0.9 kW (1.2 HP)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 26 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl:\u003c\/strong\u003e external control box with isolator, run indicator light, thermal overload protection and starting capacitor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpellers and diffusers:\u003c\/strong\u003e polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCasing:\u003c\/strong\u003e stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable supplied:\u003c\/strong\u003e 20 m\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183233695815,"sku":"DAYLIFF-DDA-900C","price":30050.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_DDA_900C_000620.jpg?v=1789024661"},{"product_id":"dayliff-dda-900c-well-kit-submersible-pump-package","title":"Dayliff DDA 900C Well Kit Submersible Pump Package","description":"\u003cp\u003eSupplied as a kit built around the Dayliff DDA 900C, this listing is aimed at getting a well or borehole supply running rather than at supplying the bare pump. The kit variant is not itself listed in Dayliff's published pump data, so the description below covers the pump family it is built on.\u003c\/p\u003e\u003cp\u003eDDA pumps are submersible multistage centrifugal units for clean, non aggressive water, with polypropylene impellers and diffusers, a stainless steel casing and mechanical seals in an intermediate oil chamber. A jacketed motor arrangement gives good cooling and lets the pump work semi submerged. The DDA 900C is the model in the range Dayliff recommends for borehole duty, and it is supplied with an external control box carrying an isolator, run indicator light, thermal overload protection and a starting capacitor, with auxiliary terminals for control probes, a pressure switch or a float switch.\u003c\/p\u003e\u003cp\u003eBuyers should confirm the exact contents of the kit with the supplier, as kit make up varies.\u003c\/p\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183233728583,"sku":"DAYLIFF-DDA-900C-WELL-KIT","price":42490.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_DDA_900C_WELL_KIT_000621.jpg?v=1789024662"},{"product_id":"dayliff-dda1000p-submersible-well-pump-1-0kw-1-3hp","title":"Dayliff DDA1000P Submersible Well Pump 1.0kW 1.3HP","description":"\u003cp\u003eLight weight for its rating, the Dayliff DDA1000P is a submersible multistage centrifugal pump for clean, non aggressive water in domestic and light duty service. It is the easiest of the DDA pumps to handle on site, which matters where a pump has to be lifted in and out of a well by hand.\u003c\/p\u003e\u003cp\u003eImpellers and diffusers are polypropylene inside a stainless steel casing, with mechanical seals in an intermediate oil chamber, and the jacketed motor arrangement lets the pump run semi submerged without overheating. A low level float switch with an adjustment clamp and an inbuilt capacitor are fitted, which keeps the installation simple, and cable is supplied with the pump. Adding a pressure controller turns it into an automatic set.\u003c\/p\u003e\u003cp\u003eWells and storage tanks are the usual sources, with the pump also used for transfer between tanks, small scale irrigation and pressure boosting in place of a dry mounted surface pump.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 1.0 kW (1.3 HP)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum current:\u003c\/strong\u003e 5 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 9.4 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpellers and diffusers:\u003c\/strong\u003e polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCasing:\u003c\/strong\u003e stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable supplied:\u003c\/strong\u003e 20 m\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183233761351,"sku":"DAYLIFF-DDA1000P","price":18480.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_DDA1000P_000622.jpg?v=1789024663"},{"product_id":"dayliff-dsd-3-10-borehole-pump-with-float-switch-0-55kw","title":"Dayliff DSD 3\/10 Borehole Pump with Float Switch 0.55kW","description":"\u003cp\u003eOrdered with a float switch, the Dayliff DSD 3\/10 covers the risk that ends most borehole pumps early: running dry. The float acts on water level and cuts the pump before the water falls below it, which protects the motor during dry spells and in boreholes with a slow recovery rate. The pump itself is a submersible multistage centrifugal unit for domestic and small scale supply from wells and boreholes.\u003c\/p\u003e\u003cp\u003eThe DSD range is built from polycarbonate impellers and diffusers, cast iron delivery and suction chambers, and stainless steel pump housing, shaft and shaft coupling, a specification that gives it useful sand handling in water that is never entirely clear. Its motor is a sealed, liquid cooled asynchronous squirrel cage type in stainless steel. Single phase pumps operate through a Dayliff SCM control box, which adds protection against overload, dry running and over or under voltage; three phase pumps require a remote DOL starter.\u003c\/p\u003e\u003cp\u003eThis combination suits households, farms and small institutions where the borehole yield varies through the year and nobody is on hand to watch the level.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor rating:\u003c\/strong\u003e 0.55kW, 0.75HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent:\u003c\/strong\u003e 5.2A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 482mm pump length, 801mm overall length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 11kg\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183241756743,"sku":"DAYLIFF-DSD-3S10-FLOATSWITCH","price":31530.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_DSD_3S10_FLOATSWITCH_000648.jpg?v=1789024747"},{"product_id":"dayliff-dsd-3-13-submersible-borehole-pump-with-float-switch","title":"Dayliff DSD 3\/13 Submersible Borehole Pump with Float Switch","description":"\u003cp\u003eBoreholes that draw down during the dry season need a pump that knows when to stop. The Dayliff DSD 3\/13 supplied with a float switch does exactly that, cutting the pump on falling water level so the motor is not left running dry. Underneath, it is a submersible multistage centrifugal pump from the DSD range, designed for domestic and small scale water supply from wells and boreholes.\u003c\/p\u003e\u003cp\u003eMaterials follow the DSD specification: polycarbonate impellers and diffusers, cast iron delivery and suction chambers, and stainless steel pump housing, shaft and shaft coupling. The polycarbonate impellers give the range its sand handling ability, an advantage in boreholes that carry a fine solids load. The pump is coupled to a sealed, liquid cooled asynchronous squirrel cage motor built from stainless steel. Single phase pumps should be operated through a Dayliff SCM control box for starting and for protection against overload, dry running and over or under voltage, while three phase pumps require a remote DOL starter, with a Dayliff SCT electronic pump controller recommended for comprehensive control.\u003c\/p\u003e\u003cp\u003eHouseholds, farms, schools and guest houses install this size where a tank has to be filled reliably and the borehole is left to work unattended.\u003c\/p\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183241822279,"sku":"DAYLIFF-DSD-3S13-FLOATSWITCH","price":34730.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_DSD_3S13_FLOATSWITCH_000649.jpg?v=1789024747"},{"product_id":"dayliff-dsd-3-18-submersible-borehole-pump-with-float-switch","title":"Dayliff DSD 3\/18 Submersible Borehole Pump with Float Switch","description":"\u003cp\u003eMore stages mean more head, and the Dayliff DSD 3\/18 is the tallest of the small bore DSD sets commonly used on domestic boreholes. Ordered here with a float switch, it stops automatically when the water level falls away from the float, which guards the motor against dry running in boreholes with a slow recovery. The pump is a submersible multistage centrifugal design for domestic and small scale water supply from wells and boreholes.\u003c\/p\u003e\u003cp\u003eIts construction combines polycarbonate impellers and diffusers, cast iron delivery and suction chambers, and stainless steel pump housing, shaft and shaft coupling. Together these give good resistance to the abrasive sand that boreholes commonly carry. A sealed, liquid cooled asynchronous squirrel cage motor in stainless steel drives the pump. Single phase installations should use a Dayliff SCM control box, which provides starting along with overload, dry running and over or under voltage protection; three phase installations need a remote DOL starter and are best fitted with a Dayliff SCT electronic pump controller.\u003c\/p\u003e\u003cp\u003eDeeper domestic boreholes, farm supplies, schools and guest houses are its usual settings.\u003c\/p\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183241855047,"sku":"DAYLIFF-DSD-3S18-FLOATSWITCH","price":41510.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_DSD_3S18_FLOATSWITCH_000650.jpg?v=1789024747"},{"product_id":"dayliff-dsd-3-7-borehole-pump-with-float-switch-0-37kw","title":"Dayliff DSD 3\/7 Borehole Pump with Float Switch 0.37kW","description":"\u003cp\u003eSmallest of the DSD 3 series, the Dayliff DSD 3\/7 is a submersible multistage centrifugal pump for domestic and small scale water supply from shallow wells and boreholes, and it is offered here with a float switch so the pump shuts down when the level drops rather than running dry.\u003c\/p\u003e\u003cp\u003eThe pump is assembled from polycarbonate impellers and diffusers, cast iron delivery and suction chambers, and stainless steel pump housing, shaft and shaft coupling. Those polycarbonate impellers are the reason the range copes with a sand content that would shorten the life of a metal impeller pump. Below the pump sits a sealed, liquid cooled asynchronous squirrel cage motor in stainless steel. On a single phase supply the pump should be run through a Dayliff SCM control box, giving starting plus protection against overload, dry running and over or under voltage.\u003c\/p\u003e\u003cp\u003eHomes on a hand dug well or a shallow borehole, kitchen gardens, livestock troughs and small guest houses are typical duties for this size.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor rating:\u003c\/strong\u003e 0.37kW, 0.5HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 1x240V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent:\u003c\/strong\u003e 3.7A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStarting current ratio:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDischarge:\u003c\/strong\u003e 1¼ inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 405mm pump length, 709mm overall length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 10kg\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183241920583,"sku":"DAYLIFF-DSD-3S7-FLOATSWITCH","price":28950.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_DSD_3S7_FLOATSWITCH_000651.jpg?v=1789024748"},{"product_id":"dayliff-dsp-1-10-submersible-borehole-pump-with-control-box","title":"Dayliff DSP 1-10 Submersible Borehole Pump with Control Box","description":"\u003cp\u003eSupplied as a complete single phase set with its capacitor winding motor and control box, the Dayliff DSP 1-10 is a submersible multistage centrifugal pump designed for domestic and small scale water supply from wells and boreholes. The DSP 1 series is the low flow end of the range, matched to household demand and to boreholes with a modest yield.\u003c\/p\u003e\u003cp\u003eMaterials of construction are Noryl impellers, glass filled polycarbonate diffusers, and stainless steel inlet and outlet chambers, stage casings, shaft and pump housing. The impellers are of the floating type, a design that helps the pump handle sand and hold its performance over a long service life. Beneath the pump is a sealed two pole motor built principally from stainless steel.\u003c\/p\u003e\u003cp\u003eThe control box supplied with it incorporates an isolator, a run indicator light, thermal overload protection and the starting capacitor, and connects directly to mains power. It also carries auxiliary terminals for control probes, a pressure switch or a float switch, so low level protection or automatic tank filling can be added without extra panels.\u003c\/p\u003e\u003cp\u003eHomes, guest houses, clinics and smallholdings are its usual installations.\u003c\/p\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183241953351,"sku":"DAYLIFF-DSP-1S10-CW-MOTOR-CNT-BX","price":43110.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_DSP_1S10_CW_MOTOR_CNT_BX_000652.jpg?v=1789024749"},{"product_id":"dayliff-dsp-1-15-submersible-borehole-pump-with-control-box","title":"Dayliff DSP 1-15 Submersible Borehole Pump with Control Box","description":"\u003cp\u003eAdditional stages give the Dayliff DSP 1-15 more head than the shortest pump in the DSP 1 series, which makes it the choice where the water level sits deeper or the delivery pipe runs uphill to a tank. It is a submersible multistage centrifugal pump for domestic and small scale supply from wells and boreholes, and it comes with its capacitor winding motor and a control box.\u003c\/p\u003e\u003cp\u003eBuild quality rests on Noryl impellers, glass filled polycarbonate diffusers, and stainless steel inlet and outlet chambers, stage casings, shaft and pump housing. The floating impeller design gives efficient performance together with sand handling and long life, useful in boreholes that never run entirely clear. A sealed two pole motor, constructed principally from stainless steel, is coupled below the pump.\u003c\/p\u003e\u003cp\u003eWithin the control box are an isolator, a run indicator light, thermal overload protection and the starting capacitor, all wired for direct connection to mains power, plus auxiliary terminals for control probes, a pressure switch or a float switch.\u003c\/p\u003e\u003cp\u003eHouseholds, farms, schools and small commercial premises drawing from a borehole are typical users.\u003c\/p\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183242018887,"sku":"DAYLIFF-DSP-1S15-CW-MOTOR-CNT-BX","price":48530.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_DSP_1S15_CW_MOTOR_CNT_BX_000653.jpg?v=1789024750"},{"product_id":"dayliff-dsp-3-11-submersible-borehole-pump-with-control-box","title":"Dayliff DSP 3-11 Submersible Borehole Pump with Control Box","description":"\u003cp\u003eBorehole supply is the specific purpose of the Dayliff DSP 3 series, and the DSP 3-11 is its shortest set, offered here complete with capacitor winding motor and control unit. Compared with the DSP 1 series it moves a greater flow at a given head, which suits properties filling storage tanks or serving several outlets at once.\u003c\/p\u003e\u003cp\u003eThe pump uses Noryl impellers and glass filled polycarbonate diffusers, with stainless steel inlet and outlet chambers, stage casings, shaft and pump housing. Floating type impellers give efficient performance, sand handling and long service, the qualities that matter most in a pump that will stay down the hole for years. A sealed two pole motor made principally from stainless steel drives it.\u003c\/p\u003e\u003cp\u003eSingle phase versions are supplied with a control unit holding an isolator, run indicator light, thermal overload protection and starting capacitor, with auxiliary terminals for control probes, a pressure switch or a float switch. Three phase versions instead require a remote DOL starter, and a Dayliff electronic pump controller is recommended for wireless low level protection, motor overload and voltage fluctuation.\u003c\/p\u003e\u003cp\u003eFarms, schools, institutions and larger homes are typical installations.\u003c\/p\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183242084423,"sku":"DAYLIFF-DSP-3S11-CW-MOTOR-CNT-BX","price":52590.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_DSP_3S11_CW_MOTOR_CNT_BX_000654.jpg?v=1789024750"},{"product_id":"dayliff-ddc-158e-econo-centrifugal-water-pump-0-75kw","title":"Dayliff DDC 158E Econo Centrifugal Water Pump 0.75kW","description":"\u003cp\u003eThe Dayliff DDC 158E is a centrifugal non self priming closed impeller pump for small scale domestic and commercial water supply, and it is at its best on boosting and transfer work where the pump sits below or level with the water it is moving.\u003c\/p\u003e\u003cp\u003eBody construction is cast iron. The Econo build differs from the standard DDC 158 in being of lighter construction and in using a stainless steel impeller rather than brass. The pump is close coupled to a TEFC electric motor rated for continuous operation and fitted with a thermal cutout against electrical overload, and it can be connected straight to the mains through a fuse or MCB. Being non self priming, it needs a flooded suction or a primed line to start reliably.\u003c\/p\u003e\u003cp\u003eIt is used for boosting pressure to upper floors, transferring water from ground tanks to roof tanks, and general supply duty in houses, shops and small commercial premises.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 0.75 kW (1 HP)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent:\u003c\/strong\u003e 4.5 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInlet and outlet:\u003c\/strong\u003e 1 inch and 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 305 x 180 x 240 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 12 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 2900 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply:\u003c\/strong\u003e 1 x 240 V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure class:\u003c\/strong\u003e IP44, insulation class F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum fluid temperature:\u003c\/strong\u003e 60 degrees C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum suction lift:\u003c\/strong\u003e 7 m at sea level\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183247360071,"sku":"DAYLIFF-DDC-158E","price":13310.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_DDC_158E_003674.jpg?v=1789024810"},{"product_id":"dayliff-ddg-1000-self-priming-domestic-pump-0-8kw","title":"Dayliff DDG 1000 Self Priming Domestic Pump 0.8kW","description":"\u003cp\u003eSelf priming is the point of the Dayliff DDG 1000. The pump is a single stage centrifugal unit that will clear air from its suction line and pull water up to it, which makes it the practical choice for drawing from a sump, a shallow well or a ground level tank that sits below the pump.\u003c\/p\u003e\u003cp\u003eBody, shaft and back plate are stainless steel, with a polypropylene impeller. A handle is moulded in for portability, so the pump can be carried to the job and set down where it is needed, and a priming screw and drain plug are provided for filling and emptying the casing. The motor is a close coupled TEFC type with built in thermal overload protection, connected to the mains through a fuse or MCB, and Dayliff recommends additional protection where voltage fluctuation is a risk.\u003c\/p\u003e\u003cp\u003eIt suits small scale irrigation, water boosting and general transfer around houses, gardens and small premises.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 0.8 kW (1 HP)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent:\u003c\/strong\u003e 2.5 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (H x L x W):\u003c\/strong\u003e 244 x 336 x 201 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 2900 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply:\u003c\/strong\u003e 1 x 240 V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsulation class:\u003c\/strong\u003e B\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum liquid temperature:\u003c\/strong\u003e 35 degrees C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum suction lift:\u003c\/strong\u003e 8 m at sea level\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183247392839,"sku":"DAYLIFF-DDG1000","price":12200.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_DDG1000_000623.jpg?v=1789024811"},{"product_id":"dayliff-ddj-1100-centrifugal-jet-water-pump-1-1kw","title":"Dayliff DDJ 1100 Centrifugal Jet Water Pump 1.1kW","description":"\u003cp\u003eAn integral ejector unit is what gives the Dayliff DDJ 1100 its priming ability, and it is the reason this pump is specified where the water sits well below the pump. It is a centrifugal jet type pump for small scale domestic and commercial water supply, and the larger of the two models in the DDJ range.\u003c\/p\u003e\u003cp\u003eThe pump body is cast iron, with the ejector and impeller made from engineering plastic. Close coupling to a TEFC electric motor rated for continuous duty keeps the assembly compact, and a thermal cutout protects the motor against electrical overload. Connection is direct to the mains through a fuse or MCB. Pumped liquid should be thin, clean and chemically non aggressive, without solid particles or fibres.\u003c\/p\u003e\u003cp\u003eIt is used for drawing from shallow wells and sumps, boosting supply in houses and small commercial buildings, and transferring water into storage where the suction lift defeats an ordinary centrifugal pump.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 1.1 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent:\u003c\/strong\u003e 7 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInlet:\u003c\/strong\u003e 1.25 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 515 x 209 x 218 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 32 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 2900 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply:\u003c\/strong\u003e 1 x 240 V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure class:\u003c\/strong\u003e IP44, insulation class F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum fluid temperature:\u003c\/strong\u003e 50 degrees C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum suction lift:\u003c\/strong\u003e 9 m at sea level\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183247458375,"sku":"DAYLIFF-DDJ-1100","price":35600.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_DDJ_1100_000624.jpg?v=1789024812"},{"product_id":"dayliff-ddj-750-centrifugal-jet-water-pump-0-75kw","title":"Dayliff DDJ 750 Centrifugal Jet Water Pump 0.75kW","description":"\u003cp\u003eShallow wells, sumps and low lying tanks are the working ground of the Dayliff DDJ 750. It is a centrifugal jet type pump with an integral ejector unit, which is what lets it prime itself and pull water from a source set well below the pump, and it is the smaller of the two DDJ models.\u003c\/p\u003e\u003cp\u003eCast iron makes up the pump body, while the ejector and impeller are engineering plastic. The pump is close coupled to a TEFC electric motor built for continuous running, with a thermal cutout guarding against electrical overload, and it connects directly to the mains through a fuse or MCB. Water pumped should be thin, clean and chemically non aggressive, free of solid particles and fibres.\u003c\/p\u003e\u003cp\u003eHouseholds, small guest houses, shops and light commercial premises use it for supply, boosting and filling storage where suction lift rules out a plain centrifugal pump.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 0.75 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent:\u003c\/strong\u003e 5.2 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInlet:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 435 x 191 x 200 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 17 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 2900 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply:\u003c\/strong\u003e 1 x 240 V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure class:\u003c\/strong\u003e IP44, insulation class F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum fluid temperature:\u003c\/strong\u003e 50 degrees C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum suction lift:\u003c\/strong\u003e 9 m at sea level\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183247491143,"sku":"DAYLIFF-DDJ-750","price":20690.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_DDJ_750_000625.jpg?v=1789024812"},{"product_id":"dayliff-ddp-50a-pump-for-buf4-ultrafiltration-plants","title":"Dayliff DDP 50A Pump for BUF4 Ultrafiltration Plants","description":"\u003cp\u003eDayliff specifies the DDP 50A as the pump fitted to the smaller units in its BUF4 ultrafiltration range, where one high efficiency pump covers feed, backwash and cleaning duty. On those plants it works with an integral Brio pump controller providing auto switching and dry run protection.\u003c\/p\u003e\u003cp\u003eThe DDP designation is the one Dayliff uses across its compact single phase domestic pump range, so the unit is a small pump intended for continuous light duty rather than heavy transfer work. Published Dayliff data for this pump appears only in the context of the treatment plants it is built into, so no standalone performance figures are quoted here.\u003c\/p\u003e\u003cp\u003eIt is bought as a replacement or spare for a BUF4 ultrafiltration system, and by installers matching a small pump to a filtration or dosing skid. Check the duty required against the plant documentation before ordering.\u003c\/p\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183247556679,"sku":"DAYLIFF-DDP-50A","price":14780.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_DDP_50A_000626.jpg?v=1789024813"},{"product_id":"dayliff-ddc-158-centrifugal-water-pump-1hp-cast-iron","title":"Dayliff DDC 158 Centrifugal Water Pump 1HP Cast Iron","description":"\u003cp\u003eListed by the supplier at 1HP, the Dayliff DDC 158 is the standard build in Dayliff's DDC family of centrifugal non self priming closed impeller pumps, sitting between the lighter Econo version and the larger DDC 170. Published Dayliff data does not break this exact listing out on its own, so no performance figures are quoted here.\u003c\/p\u003e\u003cp\u003eWhat the family shares is a cast iron pump body with a brass impeller, close coupled to a TEFC electric motor designed for continuous operation and protected by a thermal cutout against electrical overload. The motor connects directly to the mains through a fuse or MCB. As a non self priming design, the pump wants a flooded suction or a primed line, and it handles thin, clean, chemically non aggressive water.\u003c\/p\u003e\u003cp\u003eUsual duties are pressure boosting within a building, transfer from ground storage to roof tanks, and general water supply on domestic and small commercial premises.\u003c\/p\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183247589447,"sku":"DAYLIFF-DDC158-1HP","price":16010.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_DDC158_1HP_000627.jpg?v=1789024813"},{"product_id":"dayliff-dsp-5-12-submersible-borehole-pump-with-control-box","title":"Dayliff DSP 5-12 Submersible Borehole Pump with Control Box","description":"\u003cp\u003eHigher flow duties are where the Dayliff DSP 5 series belongs, and the DSP 5-12 is supplied here as a set with its capacitor winding motor and control unit. It is a submersible multistage centrifugal pump designed for borehole supply, appropriate where a property, farm or institution needs to fill storage quickly rather than trickle into a tank all day.\u003c\/p\u003e\u003cp\u003eConstruction combines Noryl impellers, glass filled polycarbonate diffusers, and stainless steel inlet and outlet chambers, stage casings, shaft and pump housing. Floating type impellers give the range its efficiency, its tolerance of sand and its long working life. The pump is coupled to a sealed two pole motor constructed principally from stainless steel.\u003c\/p\u003e\u003cp\u003eFor single phase supply the control unit provides an isolator, run indicator light, thermal overload protection and starting capacitor and connects directly to mains power, with auxiliary terminals for control probes, a pressure switch or a float switch. Three phase supply requires a remote DOL starter; a Dayliff electronic pump controller is recommended for low level protection, motor overload and voltage fluctuation.\u003c\/p\u003e\u003cp\u003eIrrigation storage, livestock supply, schools and estates are common applications.\u003c\/p\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183251914823,"sku":"DAYLIFF-DSP-5S12-CW-MOTOR-CNT-BX","price":56660.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_DSP_5S12_CW_MOTOR_CNT_BX_000655.jpg?v=1789024890"},{"product_id":"dayliff-dsp-8-08-submersible-borehole-pump-with-control-box","title":"Dayliff DSP 8-08 Submersible Borehole Pump with Control Box","description":"\u003cp\u003eLargest flow class in the DSP family, the 8 series is specified when a borehole has to deliver volume, and the Dayliff DSP 8-08 is its shortest set, supplied with capacitor winding motor and control unit. It is a submersible multistage centrifugal pump for borehole supply, aimed at irrigation schemes, larger farms, institutions and community points where a small pump would simply take too long to fill the tanks.\u003c\/p\u003e\u003cp\u003eThe pump is made up of Noryl impellers, glass filled polycarbonate diffusers, and stainless steel inlet and outlet chambers, stage casings, shaft and pump housing, with floating type impellers for efficient performance, sand handling and long life. A sealed two pole motor, principally stainless steel, is coupled below it.\u003c\/p\u003e\u003cp\u003eSingle phase sets use a control unit with isolator, run indicator light, thermal overload protection and starting capacitor, along with auxiliary terminals for control probes, a pressure switch or a float switch. Three phase sets need a remote DOL starter, and Dayliff recommends an electronic pump controller for wireless low level protection, motor overload and voltage fluctuation cover.\u003c\/p\u003e\u003cp\u003eFarms, estates, schools and water projects are its natural home.\u003c\/p\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183251980359,"sku":"DAYLIFF-DSP-8S8-CW-MOTOR-CNT-BX","price":63310.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_DSP_8S8_CW_MOTOR_CNT_BX_000656.jpg?v=1789024892"},{"product_id":"dayliff-floatswitch-automatic-pump-level-control-switch","title":"Dayliff Floatswitch Automatic Pump Level Control Switch","description":"\u003cp\u003eThe Dayliff floatswitch is a level sensing control used to start and stop an electric water pump automatically as the level in a tank, sump or reservoir rises and falls. It hangs on its own cable from the pipework or tank wall and tilts with the water surface, making or breaking the pump circuit at the chosen points.\u003c\/p\u003e\u003cp\u003eInstallations that rely on it include roof and ground tank filling, sump emptying and borehole pump control, where it guards against running a pump dry and against overflowing a tank that is already full. Domestic, agricultural and light commercial pump sets all use switches of this kind.\u003c\/p\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183252045895,"sku":"DAYLIFF-FLOATSWITCH","price":1850.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_FLOATSWITCH_000657.jpg?v=1789024893"},{"product_id":"dayliff-manual-pump-controller-for-water-pump-systems","title":"Dayliff Manual Pump Controller for Water Pump Systems","description":"\u003cp\u003eA manual pump controller gives the operator direct on and off control of an electric water pump from a single enclosed unit, with the switching gear and motor protection housed together rather than wired loose at the pump.\u003c\/p\u003e\u003cp\u003eFitted between the supply and the pump, it is used where filling is supervised — topping up storage tanks, running irrigation shifts, transferring water between reservoirs — and where automatic level or pressure control is not wanted. The Dayliff unit suits plumbers and contractors putting together straightforward pump installations for homes, farms and small commercial sites.\u003c\/p\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183252111431,"sku":"DAYLIFF-MANUAL-CONTROLLER","price":4440.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_MANUAL_CONTROLLER_000658.jpg?v=1789024894"}],"url":"https:\/\/ahihqtraders.com\/collections\/dayliff.oembed","provider":"AHIHQ Traders","version":"1.0","type":"link"}