{"title":"Hand Tools","description":"\u003cp\u003eNon-powered hand tools for trade and workshop use.\u003c\/p\u003e","products":[{"product_id":"emtop-ball-pein-hammer-16oz-450g-forged-ehambh1601","title":"EMTOP Ball Pein Hammer 16oz 450g Forged EHAMBH1601","description":"\u003cp\u003eMetalworkers reach for a ball pein rather than a claw hammer because the rounded pein shapes and peens metal where a flat face would only flatten it. The EMTOP EHAMBH1601 is a 16oz (450g) hammer, the general-purpose weight for a fitter, a welder, a panel beater or an engineering workshop bench.\u003c\/p\u003e\n\u003cp\u003eIts head is drop-forged from 45# carbon steel and heat treated so the striking face resists spreading and the body stays tough under repeated blows. The handle uses a fibreglass core in a shaped design, giving a hammer that damps the shock of each strike and will not shrink or split as a wooden handle can in dry conditions.\u003c\/p\u003e\n\u003cp\u003eSuited to riveting and peening, setting punches and chisels, straightening and shaping sheet and bar, driving and freeing pins, machinery assembly and vehicle repair, and any bench work where controlled metal-to-metal striking is needed. At 450g it is heavy enough to set a rivet in a few blows yet light enough for accurate work with a centre punch, which is the balance most fitters look for in a single general-purpose hammer.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e EHAMBH1601\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 16oz \/ 450g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead:\u003c\/strong\u003e drop-forged, heat treated, 45# carbon steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle:\u003c\/strong\u003e fibreglass, shaped design\u003c\/li\u003e\n\u003cli\u003eSupplied with a label\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180905005127,"sku":"EHAMBH1601","price":530.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EHAMBH1601_000878.jpg?v=1788978869"},{"product_id":"emtop-mini-claw-hammer-8oz-220g-fibreglass-ehamch0802","title":"EMTOP Mini Claw Hammer 8oz 220g Fibreglass EHAMCH0802","description":"\u003cp\u003eAn 8oz claw hammer for finishing work, cabinet fixing, picture rails and any job where a full framing hammer would be heavy-handed. Its head follows the profile of a standard 8oz claw hammer, so the striking face and claw behave the way a joiner expects.\u003c\/p\u003e\u003cp\u003eThe head is drop forged from 45# carbon steel and heat treated, giving a face that resists mushrooming and a claw that keeps its grip on nail shanks. A fibreglass handle absorbs shock better than solid steel and stays stable in the heat and humidity found across the region.\u003c\/p\u003e\u003cp\u003eCarpenters, shopfitters, upholsterers and household toolboxes all have a place for a hammer this size. Use it for panel pins, tacks, small nails, dowels and light assembly, and for drawing nails without marking the surrounding timber. Strike squarely with the centre of the face, as glancing blows bend nails and leave crescent marks across finished timber. Store the hammer dry so the head stays free of rust.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eWeight: 8oz (220g)\u003c\/li\u003e\n\u003cli\u003eHammer head profiled like a standard 8oz claw hammer\u003c\/li\u003e\n\u003cli\u003eDrop-forged hammer head\u003c\/li\u003e\n\u003cli\u003eHeat treated 45# carbon steel\u003c\/li\u003e\n\u003cli\u003eFibreglass handle\u003c\/li\u003e\n\u003cli\u003eSupplied on a paper card\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180916572231,"sku":"EHAMCH0802","price":390.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EHAMCH0802_000879.jpg?v=1788979021"},{"product_id":"emtop-claw-hammer-16oz-450g-fibreglass-ehamch1601","title":"EMTOP Claw Hammer 16oz 450g Fibreglass EHAMCH1601","description":"\u003cp\u003eDriving nails and pulling them out again is the daily work of a carpenter, and the 16oz claw hammer is the size that does both without tiring the arm. The EMTOP EHAMCH1601 weighs 450g and suits carpenters, formwork crews, roofers and any household toolbox.\u003c\/p\u003e\n\u003cp\u003eThe head is drop-forged from 45# carbon steel and heat treated, so the face stays flat under repeated blows and the claw keeps its shape when levering out stubborn nails. An anti-slip function is built into the grip, which matters when hands are damp or dusty on site. The handle carries a fibreglass core in a shaped design, damping the shock of a hard strike and staying dimensionally stable in heat and rain where a timber handle would loosen.\u003c\/p\u003e\n\u003cp\u003eUse it for framing and formwork, fixing battens and roofing timber, dismantling crates and shuttering, general joinery, and the household jobs of hanging, fixing and pulling nails.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e EHAMCH1601\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 16oz \/ 450g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead:\u003c\/strong\u003e drop-forged, heat treated, 45# carbon steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle:\u003c\/strong\u003e fibreglass, shaped design\u003c\/li\u003e\n\u003cli\u003eAnti-slip function\u003c\/li\u003e\n\u003cli\u003eSupplied with a label\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180918046791,"sku":"EHAMCH1601","price":570.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EHAMCH1601_000880.jpg?v=1788979041"},{"product_id":"emtop-rubber-hammer-16oz-450g-fibreglass-ehamrh1601","title":"EMTOP Rubber Hammer 16oz 450g Fibreglass EHAMRH1601","description":"\u003cp\u003eRubber-headed hammer at 16oz (450g), used where a steel face would bruise or dent the work. Tilers, fitters, panel workers and assembly crews use a mallet of this weight to tap components home, seat joints and persuade parts into alignment.\u003c\/p\u003e\u003cp\u003eThe head is rubber with non-marring plastic faces, so it protects the workpiece surface while still delivering a firm blow, and it is non-spark in use. A fibreglass handle sits behind the head, damping the return shock and keeping the tool balanced through a long session of repetitive tapping.\u003c\/p\u003e\u003cp\u003eTypical work includes bedding floor and wall tiles, closing timber joints, fitting hub caps and trim, tapping paving into a sand bed and knocking together flat-pack carcasses. It also has a place in sheet metal work where a dressing blow must not leave a mark. Move the work with several controlled taps rather than one heavy blow, because a rubber head returns much of the energy and can bounce a part out of position.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eWeight: 16oz (450g)\u003c\/li\u003e\n\u003cli\u003eRubber hammer head\u003c\/li\u003e\n\u003cli\u003eNon-spark\u003c\/li\u003e\n\u003cli\u003eNon-marring plastic faces that protect the workpiece surface\u003c\/li\u003e\n\u003cli\u003eFibreglass handle\u003c\/li\u003e\n\u003cli\u003eSupplied with a label\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180918636615,"sku":"EHAMRH1601","price":580.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EHAMRH1601_000881.jpg?v=1788979059"},{"product_id":"emtop-stoning-hammer-1000g-fibreglass-ehamsh1000","title":"EMTOP Stoning Hammer 1000g Fibreglass EHAMSH1000","description":"\u003cp\u003eStoning hammer weighing 1000g, the tool masons and stone dressers use to trim, split and shape building stone. At a kilogram it swings comfortably one-handed for a full day, which is why it also finds work in demolition, chiselling and setting out on site.\u003c\/p\u003e\u003cp\u003eThe head is drop forged and heat treated from 45# carbon steel, a process that closes the grain and gives a face able to take repeated impact against stone and cold chisels. Its fibreglass handle absorbs the shock that travels back up from a hard strike and resists the drying and splitting that shortens the life of a timber shaft.\u003c\/p\u003e\u003cp\u003eUse it for dressing quarry stone, breaking out mortar, driving pins and star drills, and rough work on concrete. Check the head is seated before each session and dress any burr that forms on the striking face. Let the weight of the head do the work: a relaxed grip near the end of the handle delivers more force and far less fatigue than choking up behind the head.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eWeight: 1000g\u003c\/li\u003e\n\u003cli\u003eDrop-forged hammer head\u003c\/li\u003e\n\u003cli\u003eHeat treated 45# carbon steel\u003c\/li\u003e\n\u003cli\u003eFibreglass handle\u003c\/li\u003e\n\u003cli\u003eSupplied with a label\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180920176711,"sku":"EHAMSH1000","price":740.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EHAMSH1000_000882.jpg?v=1788979076"},{"product_id":"emtop-stoning-hammer-1500g-fibreglass-ehamsh1500","title":"EMTOP Stoning Hammer 1500g Fibreglass EHAMSH1500","description":"\u003cp\u003eHeavier 1500g stoning hammer for masons working larger stone and for site tasks that need more mass behind each blow. The extra 500g over the one-kilogram version does the work for you on split lines and stubborn mortar beds.\u003c\/p\u003e\u003cp\u003eIts head is drop forged from 45# carbon steel and heat treated, giving a striking face that stands up to repeated contact with stone, chisels and pins. The fibreglass handle takes the recoil out of a heavy strike and holds its bond to the head through hot, dry conditions that loosen a wooden shaft.\u003c\/p\u003e\u003cp\u003eReach for it when squaring building stone, breaking out old render, driving heavy chisels and wedges, or knocking down blockwork during alterations. Wear eye protection whenever stone or concrete is being struck, as chips travel further than expected. Replace a damaged handle rather than working on with it, since a head that has begun to loosen is a danger to everyone standing nearby. Dress off the burr that forms on the striking face with heavy use.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eWeight: 1500g\u003c\/li\u003e\n\u003cli\u003eDrop-forged hammer head\u003c\/li\u003e\n\u003cli\u003eHeat treated 45# carbon steel\u003c\/li\u003e\n\u003cli\u003eFibreglass handle\u003c\/li\u003e\n\u003cli\u003eSupplied with a label\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180922110023,"sku":"EHAMSH1500","price":950.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EHAMSH1500_000883.jpg?v=1788979093"},{"product_id":"emtop-hand-saw-400mm-16-inch-7-tpi-65mn-ehas4002","title":"EMTOP Hand Saw 400mm 16 Inch 7 TPI 65Mn EHAS4002","description":"\u003cp\u003eFor cutting timber by hand, blade length decides how much work each stroke does. At 400mm (16 inch) the EMTOP EHAS4002 is the handy size, short enough to control in a confined space yet long enough to cut boards and battens efficiently, which suits carpenters, formwork crews, farm workshops and household use.\u003c\/p\u003e\n\u003cp\u003eThe blade is 65Mn spring steel, heat treated and rolled to 0.9mm thick, a combination that resists buckling in the cut while keeping the kerf narrow. Teeth are cut at 7 TPI and ground extra sharp, a coarse pitch that clears sawdust quickly through softwood and construction timber. The handle carries a three-colour soft grip, and a teeth protector is supplied to keep the edge safe in a bag and to guard hands when the saw is stored.\u003c\/p\u003e\n\u003cp\u003eUse it for cutting studs, battens and rafters, sizing boards and plywood, pruning and rough garden work, cutting formwork and shuttering, and general carpentry around the site or home.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e EHAS4002\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 400mm \/ 16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 0.9mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTeeth:\u003c\/strong\u003e 7 TPI, extra sharp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 65Mn, heat treated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle:\u003c\/strong\u003e three-colour soft grip\u003c\/li\u003e\n\u003cli\u003eSupplied with a teeth protector in a colour sleeve\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180923650119,"sku":"EHAS4002","price":710.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EHAS4002_000884.jpg?v=1788979112"},{"product_id":"emtop-163-piece-tool-chest-set-7-drawers-ehts01631","title":"EMTOP 163-Piece Tool Chest Set 7 Drawers EHTS01631","description":"\u003cp\u003eA rolling chest changes how a workshop runs: tools stay in a fixed place, the whole kit follows the job across the floor, and stocktaking takes a glance rather than an afternoon. This set combines a seven-drawer cabinet with a matched 163-piece tool inventory.\u003c\/p\u003e\u003cp\u003eThe cabinet measures 765 x 465 x 812mm, or 976mm tall once the 5 x 2 inch casters are fitted. Cabinet panels are 0.8 to 1.0mm thick with 0.7mm drawer bodies: five shallow drawers at 536 x 410 x 74.5mm for sockets and spanners, and two deep drawers at 536 x 410 x 153.5mm for bulkier items. The first drawer alone carries a 1\/4 inch ratchet, thirteen sockets from 4 to 14mm, seventeen 32mm bit sockets in hex, star, slotted and cross patterns, eight 50mm deep sockets from 6 to 13mm, 50 and 100mm extension bars, a 150mm spinner handle, a 150mm flexible extension, a universal joint and a sliding T bar.\u003c\/p\u003e\u003cp\u003eGarages, fabrication shops, plant yards and generator service teams use chests like this as the fixed base of their tooling.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: EHTS01631\u003c\/li\u003e\n\u003cli\u003e163-piece tool chest set\u003c\/li\u003e\n\u003cli\u003eChest with 7 drawers\u003c\/li\u003e\n\u003cli\u003eOverall size: 765 x 465 x 812mm\u003c\/li\u003e\n\u003cli\u003eOverall size with casters: 465 x 976mm height, casters 5 inch x 2 inch\u003c\/li\u003e\n\u003cli\u003eCabinet thickness: 0.8 to 1.0mm\u003c\/li\u003e\n\u003cli\u003eDrawer thickness: 0.7mm\u003c\/li\u003e\n\u003cli\u003e5 x drawers, 536 x 410 x 74.5mm\u003c\/li\u003e\n\u003cli\u003e2 x drawers, 536 x 410 x 153.5mm\u003c\/li\u003e\n\u003cli\u003eDrawer 1: 1 x 1\/4 inch ratchet wrench\u003c\/li\u003e\n\u003cli\u003eDrawer 1: 13 x 1\/4 inch sockets, 4 to 14mm\u003c\/li\u003e\n\u003cli\u003eDrawer 1: 17 x 1\/4 inch x 32mm bit sockets, hex 3-6mm, star T8-T30, SL 4-7mm, PH1, PH2, PZ1, PZ2\u003c\/li\u003e\n\u003cli\u003eDrawer 1: 8 x 1\/4 inch 50mm deep sockets, 6 to 13mm\u003c\/li\u003e\n\u003cli\u003eDrawer 1: 2 x extension bars, 1\/4 inch x 50mm and 1\/4 inch x 100mm\u003c\/li\u003e\n\u003cli\u003eDrawer 1: 1 x spinner handle, 1\/4 inch x 150mm\u003c\/li\u003e\n\u003cli\u003eDrawer 1: 1 x flexible extension bar, 1\/4 inch x 150mm\u003c\/li\u003e\n\u003cli\u003eDrawer 1: 1 x 1\/4 inch universal joint\u003c\/li\u003e\n\u003cli\u003eDrawer 1: 1 x sliding T bar, 1\/4 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180929253447,"sku":"EHTS01631","price":88800.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EHTS01631_000904.jpg?v=1788979210"},{"product_id":"emtop-hand-saw-500mm-20-inch-7-tpi-65mn-ehas5002","title":"EMTOP Hand Saw 500mm 20 Inch 7 TPI 65Mn EHAS5002","description":"\u003cp\u003eLonger strokes mean fewer of them, and on wide boards a 500mm blade cuts noticeably faster than a shorter saw. The EMTOP EHAS5002 is the 20 inch model in the range, favoured by carpenters, joiners, formwork crews and anyone regularly ripping and crosscutting construction timber.\u003c\/p\u003e\n\u003cp\u003eIts blade is heat-treated 65Mn spring steel at 0.9mm thick, stiff enough to run straight over the longer span while keeping the cut narrow and the effort down. The teeth are cut at 7 TPI and ground extra sharp for rapid waste removal in softwood and site timber. A three-colour soft handle spreads the load through a long session, and a teeth protector is included to guard the edge in transit and in the tool bag.\u003c\/p\u003e\n\u003cp\u003eSuited to cutting rafters, joists and studwork, sizing sheet material and wide boards, shuttering and formwork, timber yard and joinery shop work, and general building and farm carpentry. Starting the cut on the pull stroke with the thumb as a guide, then lengthening out to use the full blade, gets the most from the extra reach this size offers.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e EHAS5002\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 500mm \/ 20 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 0.9mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTeeth:\u003c\/strong\u003e 7 TPI, extra sharp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 65Mn, heat treated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle:\u003c\/strong\u003e three-colour soft grip\u003c\/li\u003e\n\u003cli\u003eSupplied with a teeth protector in a colour sleeve\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180933873735,"sku":"EHAS5002","price":820.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EHAS5002_000886.jpg?v=1788979266"},{"product_id":"emtop-6-piece-screwdriver-set-slotted-phillips-esst0602","title":"EMTOP 6 Piece Screwdriver Set Slotted Phillips ESST0602","description":"\u003cp\u003eEvery toolbox needs a straightforward set of screwdrivers that gets used every week and does not cost much to replace. The EMTOP ESST0602 is that set: six drivers in the sizes most jobs call for, suitable for households, hardware counters, site kits and general maintenance.\u003c\/p\u003e\n\u003cp\u003eBlades are chrome vanadium steel with a round shank, fitted to a new-design handle shaped to give purchase when a screw needs turning force rather than finesse. Slotted drivers are supplied as SL5.5x5x75, SL5.5x5x100 and SL6.5x6x150, and Phillips as PH1x5x75, PH1x5x100 and PH2x6x150, so both short stubby reach and long blade access are covered in each pattern.\u003c\/p\u003e\n\u003cp\u003ePut them to work on furniture assembly, door and window fittings, appliance covers, light fittings and switch plates, vehicle interior trim, and the general small repairs that come up around a home, shop or workshop. Matching the driver to the screw head properly matters more than force: using the 150mm blades on larger screws and the 75mm ones on small fixings keeps heads intact and saves drilling out damaged fasteners later. The set hangs on a plastic hanger for shop display or wall storage.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e ESST0602\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContents:\u003c\/strong\u003e 6 screwdrivers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Cr-V, round blade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlotted:\u003c\/strong\u003e SL5.5x5x75, SL5.5x5x100, SL6.5x6x150\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhillips:\u003c\/strong\u003e PH1x5x75, PH1x5x100, PH2x6x150\u003c\/li\u003e\n\u003cli\u003eNew design handle\u003c\/li\u003e\n\u003cli\u003eSupplied on a plastic hanger\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180933972039,"sku":"ESST0602","price":650.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/ESST0602_004558.jpg?v=1788979270"},{"product_id":"emtop-hand-saw-for-cutting-timber-and-board-ehas4502","title":"EMTOP Hand Saw for Cutting Timber and Board EHAS4502","description":"\u003cp\u003eThere is still no substitute for a hand saw when one cut is needed and setting up a power tool would take longer than making it. A hand saw works anywhere, needs no supply and gives full control over the last few strokes of a cut.\u003c\/p\u003e\u003cp\u003eCarpenters use one for trimming studs, battens, skirting, sheet material and rough timber on site. Mark the line clearly, start the cut with the blade drawn back against the thumb, then lengthen the stroke and let the weight of the saw do the work.\u003c\/p\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180934398023,"sku":"EHAS4502","price":780.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EHAS4502_000885.jpg?v=1788979281"},{"product_id":"emtop-8-piece-combination-spanner-set-6-19mm-ecss10801","title":"EMTOP 8 Piece Combination Spanner Set 6-19mm ECSS10801","description":"\u003cp\u003eA combination spanner carries an open end on one side and a ring on the other, so the same tool starts a nut quickly and then finishes it with a grip on all six flats. The EMTOP ECSS10801 gathers eight of them for mechanics, plant fitters, plumbers and workshops handling metric fasteners.\u003c\/p\u003e\n\u003cp\u003eSizes supplied are 6mm, 8mm, 10mm, 12mm, 14mm, 15mm, 17mm and 19mm, a spread that covers most vehicle, machinery and general engineering fasteners without duplicating rarely used sizes. Each spanner is fine polished, a finish that wipes clean of oil and grease and shows the size marking clearly when the set is spread on a bench. Having both ends in one tool keeps the kit light for a fitter working away from the workshop.\u003c\/p\u003e\n\u003cp\u003eUse them for vehicle and motorcycle servicing, generator and pump maintenance, agricultural machinery, structural and plant assembly, and general repair work where a socket set cannot reach.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e ECSS10801\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContents:\u003c\/strong\u003e 8 combination spanners\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize range:\u003c\/strong\u003e 6-19mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSizes:\u003c\/strong\u003e 6mm, 8mm, 10mm, 12mm, 14mm, 15mm, 17mm, 19mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e fine polished\u003c\/li\u003e\n\u003cli\u003eSupplied on a plastic hanger\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180935544903,"sku":"ECSS10801","price":1210.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/ECSS10801_004559.jpg?v=1788979288"},{"product_id":"emtop-mitre-box-and-back-saw-set-300mm-11tpi-ehasmb3001","title":"EMTOP Mitre Box and Back Saw Set 300mm 11TPI EHASMB3001","description":"\u003cp\u003eA mitre box and back saw supplied together, giving carpenters, shopfitters and home workshops a simple way to cut repeatable angles in architrave, skirting, beading and picture frame stock. The box guides the blade so the angle comes from the fixture rather than the eye.\u003c\/p\u003e\u003cp\u003eThe saw measures 300mm with 11 teeth per inch, a pitch fine enough to leave a clean edge on softwood, hardwood and plastic mouldings. Its blade is 65Mn steel with heat treated teeth, stiffened along the back so the cut stays straight, and the handle carries a new design for a controlled grip.\u003c\/p\u003e\u003cp\u003eThe plastic mitre box measures 300 x 140 x 80mm and takes the common mitre and square cuts needed for trim work. Clamp or screw it to a bench for the steadiest results when working through a run of lengths. Let the blade find its own line for the first few strokes with the saw held lightly, and the guide slots will take care of the angle from there.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePlastic mitre box with back saw set\u003c\/li\u003e\n\u003cli\u003e1 plastic mitre box, size 300 x 140 x 80mm\u003c\/li\u003e\n\u003cli\u003e1 back saw, size 300mm (12 in), 11TPI\u003c\/li\u003e\n\u003cli\u003eSaw blade material: 65Mn\u003c\/li\u003e\n\u003cli\u003eHeat treated teeth\u003c\/li\u003e\n\u003cli\u003eNew design handle\u003c\/li\u003e\n\u003cli\u003eShrink packed\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180936822855,"sku":"EHASMB3001","price":1340.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EHASMB3001_000887.jpg?v=1788979297"},{"product_id":"emtop-91-piece-tool-set-ehts00911-for-home-and-workshop","title":"EMTOP 91 Piece Tool Set EHTS00911 for Home and Workshop","description":"\u003cp\u003eMost repairs around a house, a shop or a vehicle call for the same handful of tools, and a mid-sized set puts them in one case. The EMTOP EHTS00911 is a 91 piece kit, a sensible starting point for a new home owner, a caretaker or a technician putting together a first working set.\u003c\/p\u003e\u003cp\u003eSets at this count are usually built around a socket and ratchet section with screwdrivers, bits, pliers and hex keys in a fitted case that keeps everything visible. Manufacturer specifications were not published for this model, so confirm the contents list before ordering if a particular tool is essential.\u003c\/p\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180939739207,"sku":"EHTS00911","price":8020.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EHTS00911_004560.jpg?v=1788979303"},{"product_id":"emtop-wall-board-saw-150mm-6in-8tpi-65mn-ehasw1501","title":"EMTOP Wall Board Saw 150mm 6in 8TPI 65Mn EHASW1501","description":"\u003cp\u003eWall board saw with a 150mm blade and a pointed nose, made for plunging straight into plasterboard and cutting an opening without a pilot hole. Dry liners, electricians and ceiling fitters use one whenever a socket box, downlight or access panel has to be let into a finished board.\u003c\/p\u003e\u003cp\u003eThe blade is 65Mn steel with heat treated teeth at 8 teeth per inch, ground as triple teeth on three edges so it cuts on the push as well as the pull. That combination gets through gypsum board, soft timber, plastic panel and insulation without the blade wandering off the pencil line.\u003c\/p\u003e\u003cp\u003eIts narrow profile turns inside a cut, which is what allows a tight rectangle to be formed for a back box. Keep the strokes short and let the teeth clear the dust rather than forcing the blade. Check for cables and pipes before plunging into a board, since a blind cut into a stud wall can find a circuit that has not been isolated.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSize: 6 in (150mm)\u003c\/li\u003e\n\u003cli\u003eBlade material: 65Mn\u003c\/li\u003e\n\u003cli\u003e8TPI with heat treated teeth\u003c\/li\u003e\n\u003cli\u003eTriple teeth, precision ground on 3 edges\u003c\/li\u003e\n\u003cli\u003eFast cutting action\u003c\/li\u003e\n\u003cli\u003eSupplied in a colour sleeve\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180942884935,"sku":"EHASW1501","price":390.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EHASW1501_000890.jpg?v=1788979348"},{"product_id":"emtop-f-clamp-80x300mm-270kg-force-eclpf08101","title":"EMTOP F Clamp 80x300mm 270kg Force ECLPF08101","description":"\u003cp\u003eSmaller work calls for a smaller clamp, and a 300mm bar is easier to handle on a crowded bench than a long one. The EMTOP ECLPF08101 is the compact model in the F clamp range, suited to joiners, cabinet makers, model and repair work and light fabrication.\u003c\/p\u003e\n\u003cp\u003eThe clamp takes work up to 80mm deep and 300mm along the bar, which covers rails, stiles, trim and most small assemblies. Its bar is 6mm thick by 22mm wide with a 13.5mm screw thread, a scale matched to the 270kg maximum clamping force so the tool stays light without flexing under normal use. The plastic handle gives a comfortable hold when the screw is being wound down repeatedly through a set of joints.\u003c\/p\u003e\n\u003cp\u003eUse it for holding glued joints in furniture and cabinets, clamping trim and mouldings while pinning, securing small work to a bench, holding parts for drilling, and light metal assembly and tacking.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e ECLPF08101\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClamp size:\u003c\/strong\u003e 80 x 300mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum clamping force:\u003c\/strong\u003e 270kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBar thickness and width:\u003c\/strong\u003e 6 x 22mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScrew thread diameter:\u003c\/strong\u003e 13.5mm\u003c\/li\u003e\n\u003cli\u003eSupplied on a paper card\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180945539143,"sku":"ECLPF08101","price":870.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/ECLPF08101_000815.jpg?v=1788979422"},{"product_id":"emtop-328-piece-tool-chest-set-ehts03281-workshop-kit","title":"EMTOP 328 Piece Tool Chest Set EHTS03281 Workshop Kit","description":"\u003cp\u003eGarages and maintenance workshops that service a mixed fleet need breadth as much as quality, and a large chest set is the usual answer. The EMTOP EHTS03281 is a 328 piece kit, the size shops buy to equip a bay or a mobile service van in one purchase.\u003c\/p\u003e\u003cp\u003eKits at this count generally run to a full socket range in more than one drive size, spanners, screwdrivers, pliers, hex and torx keys and striking tools, arranged in fitted trays inside a chest. Manufacturer specifications for this particular model were not available, so confirm the exact contents and case type before committing to an order.\u003c\/p\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180946456647,"sku":"EHTS03281","price":105610.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EHTS03281_004561.jpg?v=1788979438"},{"product_id":"emtop-roller-cabinet-7-drawer-765-x-465-x-812mm-etcs0702","title":"EMTOP Roller Cabinet 7 Drawer 765 x 465 x 812mm ETCS0702","description":"\u003cp\u003eLarger seven-drawer roller cabinet built on a 765 x 465 x 812mm body, aimed at workshops that keep a full set of hand tools, sockets and meters in one mobile unit. Five shallow drawers handle everyday tools while two deep drawers take bulkier items.\u003c\/p\u003e\u003cp\u003eSheet thickness is 0.8-1.0mm for the cabinet and 0.7mm for the drawers, giving a stiff carcass that keeps the slides in line when the unit is fully loaded. Ball bearing drawers glide under weight, a central locking system secures every drawer at once, and anti-shock protection guards the contents while the cabinet is moved.\u003c\/p\u003e\u003cp\u003eFive iron hooks are supplied for hanging tools on the side, keeping frequently used items in reach. On 5 x 2 in casters the working height comes to 976mm, so the top doubles as a stable surface for a task in progress. Lock the drawers before moving the unit, and reserve the hooks for the tools reached for most often so the drawers can stay shut during a job.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRoller cabinet with 7 drawers\u003c\/li\u003e\n\u003cli\u003eOverall size: 765 x 465 x 812mm\u003c\/li\u003e\n\u003cli\u003eOverall size with casters: 765 x 465 x 976mm\u003c\/li\u003e\n\u003cli\u003eCaster size: 5 x 2 in\u003c\/li\u003e\n\u003cli\u003eCabinet thickness: 0.8-1.0mm\u003c\/li\u003e\n\u003cli\u003eDrawer thickness: 0.7mm\u003c\/li\u003e\n\u003cli\u003e5 drawers 536 x 410 x 74.5mm\u003c\/li\u003e\n\u003cli\u003e2 drawers 536 x 410 x 153.5mm\u003c\/li\u003e\n\u003cli\u003eCentral locking system\u003c\/li\u003e\n\u003cli\u003eBall bearing drawers with anti-shock protection\u003c\/li\u003e\n\u003cli\u003e5 iron hooks for hanging tools\u003c\/li\u003e\n\u003cli\u003ePacked on a steel pallet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180947210311,"sku":"ETCS0702","price":62940.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/ETCS0702_004562.jpg?v=1788979458"},{"product_id":"emtop-f-clamp-120x500mm-450kg-force-eclpf12301","title":"EMTOP F Clamp 120x500mm 450kg Force ECLPF12301","description":"\u003cp\u003eGlue-ups, jigs and welding set-ups all need a clamp with real reach, and 500mm covers most panel and frame work. The EMTOP ECLPF12301 is a plastic-handled F clamp for carpenters, joiners, metal fabricators and site crews holding work while it is fixed.\u003c\/p\u003e\n\u003cp\u003eCapacity is 120mm deep by 500mm along the bar, so a wide board can be gripped well in from its edge rather than only at the corner. The sliding bar measures 8mm thick by 30mm wide, a section stiff enough to resist springing open as pressure builds, and the screw thread is 15.3mm in diameter. Maximum clamping force is 450kg, enough to close a glued joint tight or to hold steel section firmly for tacking.\u003c\/p\u003e\n\u003cp\u003eTypical uses include holding boards while adhesive cures, clamping frames square during assembly, securing workpieces to a bench for cutting or routing, holding steel for welding, and fixing formwork and temporary supports. Buying clamps in pairs is usually the right approach, since a joint held at one point alone tends to twist as the screw is tightened.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e ECLPF12301\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClamp size:\u003c\/strong\u003e 120 x 500mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum clamping force:\u003c\/strong\u003e 450kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBar thickness and width:\u003c\/strong\u003e 8 x 30mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScrew thread diameter:\u003c\/strong\u003e 15.3mm\u003c\/li\u003e\n\u003cli\u003eSupplied on a paper card\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180947406919,"sku":"ECLPF12301","price":1640.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/ECLPF12301_000816.jpg?v=1788979465"},{"product_id":"emtop-roller-cabinet-4-drawer-765-x-465-x-812mm-etcs0402","title":"EMTOP Roller Cabinet 4 Drawer 765 x 465 x 812mm ETCS0402","description":"\u003cp\u003eFour-drawer roller cabinet for garages, workshops and plant rooms where tools need to move to the job and stay secure between shifts. The footprint of 765 x 465 x 812mm gives a working top at a comfortable height while remaining narrow enough to pass between benches.\u003c\/p\u003e\u003cp\u003eCabinet sheet runs 0.8-1.0mm thick with 0.7mm drawer material, and each of the four 536 x 410 x 74.5mm drawers rides on ball bearing slides so a loaded drawer still pulls smoothly. A central locking system secures the whole stack with one key, and anti-shock protection cushions the cabinet as it is wheeled over rough floors.\u003c\/p\u003e\u003cp\u003eCasters measure 5 x 2 in, sized to roll across concrete, expansion joints and cable runs without snatching. Overall height with casters is 976mm, and the panel area of 560 x 420 x 395mm suits larger items that will not lie in a drawer. Load the heaviest items into the lowest drawer so the cabinet keeps its balance when it is rolled across a workshop floor or over a threshold.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRoller cabinet with 4 drawers\u003c\/li\u003e\n\u003cli\u003eOverall size: 765 x 465 x 812mm\u003c\/li\u003e\n\u003cli\u003eOverall size with casters: 765 x 465 x 976mm\u003c\/li\u003e\n\u003cli\u003eCaster size: 5 x 2 in\u003c\/li\u003e\n\u003cli\u003eCabinet thickness: 0.8-1.0mm\u003c\/li\u003e\n\u003cli\u003eDrawer thickness: 0.7mm\u003c\/li\u003e\n\u003cli\u003e4 drawers, each 536 x 410 x 74.5mm\u003c\/li\u003e\n\u003cli\u003ePanel area: 560 x 420 x 395mm\u003c\/li\u003e\n\u003cli\u003eCentral locking system\u003c\/li\u003e\n\u003cli\u003eBall bearing drawers with anti-shock protection\u003c\/li\u003e\n\u003cli\u003ePacked on a steel pallet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180947734599,"sku":"ETCS0402","price":53450.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/ETCS0402_004563.jpg?v=1788979477"},{"product_id":"emtop-hacksaw-frame-300mm-industrial-24-tpi-ehfe3004","title":"EMTOP Hacksaw Frame 300mm Industrial 24 TPI EHFE3004","description":"\u003cp\u003eCutting flush against a wall or along the face of a pipe is only possible if the blade can be turned in the frame. The EMTOP EHFE3004 is an industrial 300mm (12 inch) hacksaw frame that offers that, aimed at plumbers, steel fabricators, electricians running conduit and maintenance fitters.\u003c\/p\u003e\n\u003cp\u003eThe blade mounts at either 45 or 90 degrees, and a quick-release mechanism changes it without tools while adjustable tensioning keeps it rigid enough to track a straight line. The handle combines aluminium with ABS and TPR plastics in a soft-grip design that stays firm through a long cut. One 300mm 24 TPI bi-metal blade in M2 and D6A steel is supplied, coded EHFB2403, a fine tooth count suited to thin-wall tube and sheet.\u003c\/p\u003e\n\u003cp\u003eUse it for cutting conduit, copper and steel pipe, threaded rod and bar, plastic trunking and pipe, timber battens, and general metal work on site or at the bench.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e EHFE3004\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 300mm \/ 12 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade supplied:\u003c\/strong\u003e 1 piece, 300mm (12 inch), 24 TPI, M2 and D6A bi-metal (EHFB2403)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle material:\u003c\/strong\u003e aluminium with ABS and TPR plastics\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable blade angle:\u003c\/strong\u003e 45 and 90 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCuts:\u003c\/strong\u003e metal, plastic, wood\u003c\/li\u003e\n\u003cli\u003eAdjustable blade tension\u003c\/li\u003e\n\u003cli\u003eQuick-release blade changing mechanism\u003c\/li\u003e\n\u003cli\u003eSoft grip design\u003c\/li\u003e\n\u003cli\u003eSupplied on a paper card\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180948455495,"sku":"EHFE3004","price":1080.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EHFE3004_000891.jpg?v=1788979498"},{"product_id":"emtop-plastic-tool-box-with-carry-handle-epbx1701","title":"EMTOP Plastic Tool Box with Carry Handle EPBX1701","description":"\u003cp\u003eEvery trade van needs a box that carries a working set of hand tools and closes properly. This one is moulded in plastic with a carry handle across the top and latches on the lid, so the contents stay put when it is lifted over a wall or thrown into the back of a pickup.\u003c\/p\u003e\u003cp\u003ePlastic has the advantage over steel here: it does not rust in a damp store, it does not mark finished surfaces, and it is lighter to carry up a ladder or across a site at the end of a shift.\u003c\/p\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180948488263,"sku":"EPBX1701","price":1910.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EPBX1701_000981.jpg?v=1788979499"},{"product_id":"emtop-tool-cart-3-tray-719-x-365-x-663mm-etcs0301","title":"EMTOP Tool Cart 3 Tray 719 x 365 x 663mm ETCS0301","description":"\u003cp\u003eThree-tray tool cart for garages, service bays and production areas where tools and parts have to follow the work. The open trays keep everything visible, so a technician can see at a glance what is on the trolley without opening drawers.\u003c\/p\u003e\u003cp\u003eOverall size is 719 x 365 x 663mm, rising to 780mm on its casters, which sets the top tray at a convenient working height beside a vehicle or machine. Cabinet sheet measures 0.6-0.8mm and the trays 0.6mm, with three trays of 719 x 365 x 85mm giving useful depth for sockets, fittings and small components.\u003c\/p\u003e\u003cp\u003eCasters at 3 x 2 in keep the cart manoeuvrable in tight bays and around benches. Useful for vehicle servicing, generator and pump maintenance, assembly lines and as a mobile parts station during a strip-down. Open trays suit a job in progress better than long-term storage, since nothing is held in place if the cart is knocked or tilted. Keeping one tray clear gives you a working surface for parts coming off a machine.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOverall size: 719 x 365 x 663mm\u003c\/li\u003e\n\u003cli\u003eOverall size with casters: 719 x 365 x 780mm\u003c\/li\u003e\n\u003cli\u003eCaster size: 3 x 2 in\u003c\/li\u003e\n\u003cli\u003eCabinet thickness: 0.6-0.8mm\u003c\/li\u003e\n\u003cli\u003eTray thickness: 0.6mm\u003c\/li\u003e\n\u003cli\u003e3 trays, each 719 x 365 x 85mm\u003c\/li\u003e\n\u003cli\u003ePacked in a carton box\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180948815943,"sku":"ETCS0301","price":13110.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/ETCS0301_004564.jpg?v=1788979501"},{"product_id":"emtop-plastic-tool-box-for-site-and-workshop-epbx1702","title":"EMTOP Plastic Tool Box for Site and Workshop EPBX1702","description":"\u003cp\u003eStorage is the quiet difference between a tidy job and a slow one. Moulded in tough plastic with a latching lid and a handle sized for a gloved hand, this box gathers a working kit into one place so nothing is left behind at the end of the day.\u003c\/p\u003e\u003cp\u003eIt suits electricians, plumbers, mechanics and maintenance teams who move between jobs, and it doubles as bench storage in a workshop. Plastic construction means no rust in a damp store and no scuffing of finished floors and worktops when the box is set down.\u003c\/p\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180949471303,"sku":"EPBX1702","price":2200.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EPBX1702_000982.jpg?v=1788979512"},{"product_id":"emtop-snap-off-blade-utility-knife-for-site-esbk1801","title":"EMTOP Snap Off Blade Utility Knife for Site ESBK1801","description":"\u003cp\u003eSnap-off knives solve the blunt blade problem the simple way: when the tip stops cutting cleanly, the used segment is snapped off and a sharp edge takes its place. The blade slides out on a ratchet and locks at the working length.\u003c\/p\u003e\u003cp\u003eDrylining, insulation, flooring, decorating and stores work all rely on them for cutting plasterboard, membrane, foam, carpet, vinyl, film and cartons.\u003c\/p\u003e\u003cp\u003eRetract the blade before it goes back in the pouch, and snap off spent segments with pliers into a bin rather than by hand.\u003c\/p\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180949536839,"sku":"ESBK1801","price":130.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/ESBK1801_004565.jpg?v=1788979516"},{"product_id":"emtop-hacksaw-frame-300mm-12-inch-abs-ehfe3001","title":"EMTOP Hacksaw Frame 300mm 12 Inch ABS EHFE3001","description":"\u003cp\u003eSometimes the job just needs a saw that cuts pipe and rod without fuss. The EMTOP EHFE3001 is a straightforward 300mm (12 inch) hacksaw frame for hardware counters, household toolboxes, site kits and plumbers who want a spare on the van.\u003c\/p\u003e\n\u003cp\u003eConstruction is deliberately simple: an ABS plastic handle with a soft grip design keeps the tool light and comfortable, and there is no mechanism to seize or wear. A 300mm 24 TPI bi-metal blade in M2 and D6A steel comes fitted, a fine tooth pitch that suits thin-wall tube, conduit and sheet where a coarse blade would snag. The frame handles metal, plastic and wood, making it a general cutting tool rather than a specialist one.\u003c\/p\u003e\n\u003cp\u003eUse it for cutting conduit and pipe, threaded rod, bolts and bar, plastic trunking and waste pipe, small timber sections, and the occasional cutting job in a home or shop where a power saw would be more tool than the task needs.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e EHFE3001\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 300mm \/ 12 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade supplied:\u003c\/strong\u003e 1 piece, 300mm (12 inch), 24 TPI, M2 and D6A bi-metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle material:\u003c\/strong\u003e ABS plastics\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCuts:\u003c\/strong\u003e metal, plastic, wood\u003c\/li\u003e\n\u003cli\u003eSoft grip design, lightweight\u003c\/li\u003e\n\u003cli\u003eSupplied on a paper card\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180949569607,"sku":"EHFE3001","price":500.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EHFE3001_005839.jpg?v=1788979516"},{"product_id":"emtop-plastic-tool-box-with-lidded-tray-epbx2001","title":"EMTOP Plastic Tool Box with Lidded Tray EPBX2001","description":"\u003cp\u003eKeeping hand tools findable is half the value of a good box. This one uses the familiar arrangement of a lift-out tray for spanners, pliers, bits and fixings sitting above the main compartment, which is left clear for drills, hammers and longer tools.\u003c\/p\u003e\u003cp\u003eThe latched lid keeps everything closed in transit and the moulded handle takes the load comfortably over a distance.\u003c\/p\u003e\u003cp\u003eFitters, maintenance crews and serious home users get on well with it, since the tray means the small items are not buried under the heavy ones.\u003c\/p\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180949930055,"sku":"EPBX2001","price":3320.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EPBX2001_000983.jpg?v=1788979526"},{"product_id":"emtop-tile-cutter-for-ceramic-and-porcelain-etcr6004","title":"EMTOP Tile Cutter for Ceramic and Porcelain ETCR6004","description":"\u003cp\u003eTile setters live or die by the cut edge, since anything ragged has to be hidden behind a bead or a fitting. A tile cutter takes the tile to a straight line along a guided path, which is what produces the consistent edges that a run of full and cut tiles needs to look right.\u003c\/p\u003e\u003cp\u003eIt handles the everyday work of a tiling job: cutting to walls, sizing around door openings, trimming borders and working diagonals across a floor.\u003c\/p\u003e\u003cp\u003eMark the face clearly, seat the tile squarely against the guide and keep the working parts clean of dust between cuts.\u003c\/p\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180950454343,"sku":"ETCR6004","price":7640.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/ETCR6004_004566.jpg?v=1788979531"},{"product_id":"emtop-plastic-tool-box-for-hand-tool-storage-epbx2002","title":"EMTOP Plastic Tool Box for Hand Tool Storage EPBX2002","description":"\u003cp\u003eA tool box earns its keep by surviving the back of a van. Moulded in impact-resistant plastic, this one is built to be dropped, stacked and loaded without splitting, and the latched lid holds the contents securely while it is being carried.\u003c\/p\u003e\u003cp\u003eUse it to keep a complete kit made up and ready: spanners, drivers, pliers, tape and consumables in one place, so a call-out does not begin with hunting for tools.\u003c\/p\u003e\u003cp\u003eIt stores well on a shelf, in a store cupboard or in a vehicle, and wipes clean after a dusty job.\u003c\/p\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180950847559,"sku":"EPBX2002","price":3500.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EPBX2002_000984.jpg?v=1788979540"},{"product_id":"emtop-pvc-pipe-cutter-3-42mm-sk5-blade-epcr4201","title":"EMTOP PVC Pipe Cutter 3-42mm SK5 Blade EPCR4201","description":"\u003cp\u003ePipe cutter for PVC and similar plastic pipe from 3mm up to 42mm, covering the sizes plumbers and irrigation crews handle on domestic supply, waste and drip lines. A single squeeze parts the pipe square, which saves the deburring a hacksaw cut usually needs.\u003c\/p\u003e\u003cp\u003eThe blade is SK5 steel, hardened to hold a fine edge through repeated cuts in tough plastic, and the tool measures 215mm overall so it works comfortably one-handed in a trench or ceiling void. An auto-open function returns the jaw after each cut, keeping a run of cuts moving without resetting the handle by hand.\u003c\/p\u003e\u003cp\u003eReach for it on plumbing first fix, irrigation layouts, conduit runs and any repair where a clean, burr-free pipe end is needed before a fitting is solvent welded or pushed home. Turn the pipe slightly between squeezes on the larger diameters so the blade follows the same line, which keeps the end square for solvent welding. A dull blade deforms plastic rather than cutting it, so keep the edge in good order.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLength: 215mm\u003c\/li\u003e\n\u003cli\u003eBlade material: SK5\u003c\/li\u003e\n\u003cli\u003eCutting diameter: 3-42mm\u003c\/li\u003e\n\u003cli\u003eAuto-open function\u003c\/li\u003e\n\u003cli\u003eSupplied in double blister packaging\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180951928903,"sku":"EPCR4201","price":1010.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EPCR4201_000985.jpg?v=1788979557"},{"product_id":"emtop-combination-spanner-ring-and-open-end-ecss11202","title":"EMTOP Combination Spanner Ring and Open End ECSS11202","description":"\u003cp\u003eA combination spanner carries an open jaw at one end and a ring at the other, both cut to the same size. The open end slips onto a nut where access is tight; the ring grips more of the flats and is the safer choice when a fastener is tight or seized.\u003c\/p\u003e\u003cp\u003eFitters, mechanics, plumbers and machine installers use them daily on bolted assemblies, pipe flanges, pumps and vehicle work. Pull rather than push on the handle, and seat the ring fully on the nut before applying force.\u003c\/p\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180951961671,"sku":"ECSS11202","price":4230.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/ECSS11202_004493.jpg?v=1788979562"},{"product_id":"emtop-hex-key-set-9-piece-long-arm-1-5-10mm-ehky1091","title":"EMTOP Hex Key Set 9 Piece Long Arm 1.5-10mm EHKY1091","description":"\u003cp\u003eSocket head screws are everywhere in machinery, furniture and bicycles, and a hex key set is the only way to reach them. The EMTOP EHKY1091 covers nine metric sizes and is a standard item for fitters, mechanics, cabinet installers and household toolboxes.\u003c\/p\u003e\n\u003cp\u003eSizes run 1.5, 2, 2.5, 3, 4, 5, 6, 8 and 10mm, taking the set from small grub screws through to the larger socket cap screws found on machine guards and structural fittings. The long arm pattern reaches recessed screws that a stubby key cannot, and gives more leverage on the short leg when a fastener is tight. Keys are made from S2 tool steel, a grade known for holding its shape at the corners rather than rounding under load, then heat treated and chrome plated for corrosion resistance.\u003c\/p\u003e\n\u003cp\u003eUse them on machinery guards and couplings, furniture and shelving assembly, bicycle and motorcycle work, tool and jig setting, and general maintenance across workshops and homes.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e EHKY1091\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContents:\u003c\/strong\u003e 9 piece hex key set\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePattern:\u003c\/strong\u003e long arm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e S2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSizes:\u003c\/strong\u003e 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTreatment:\u003c\/strong\u003e heat treated and chrome plated\u003c\/li\u003e\n\u003cli\u003eSupplied in double blister packaging\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180952289351,"sku":"EHKY1091","price":440.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EHKY1091_000894.jpg?v=1788979570"},{"product_id":"emtop-combination-pliers-6-7-and-8-inch-two-colour","title":"EMTOP Combination Pliers 6, 7 and 8 Inch Two Colour","description":"\u003cp\u003eCombination pliers grip, twist and cut in one tool, which is why an electrician rarely puts them down. This EMTOP range is supplied in 6 inch (160mm), 7 inch (180mm) and 8 inch (200mm) sizes, so the tool can be matched to the conductor size and the space available.\u003c\/p\u003e\n\u003cp\u003eSerrated flat jaws hold round and flat stock, the curved section grips pipe and rod, and the side cutter trims conductors close to the joint. All three sizes are polished and coated with anti-rust oil to keep the pivot and jaws clean in storage, and each has a two-colour handle. The 6 inch pair suits light wiring and work inside enclosures, the 7 inch is the everyday choice for domestic and commercial installation, and the 8 inch gives more jaw and more leverage for heavier cable and fencing wire.\u003c\/p\u003e\n\u003cp\u003eSuited to wiring and panel work, appliance and vehicle electrics, fencing and mesh, general assembly, and maintenance across workshops and sites.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 inch, EPLRC0611:\u003c\/strong\u003e size 6 inch \/ 160mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e7 inch, EPLRC0711:\u003c\/strong\u003e size 7 inch \/ 180mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8 inch, EPLRC0811:\u003c\/strong\u003e size 8 inch \/ 200mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e polished with anti-rust oil\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle:\u003c\/strong\u003e two colour\u003c\/li\u003e\n\u003cli\u003eSupplied on a sliding card\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"6\"","offer_id":43180952977479,"sku":"EPLRC0611","price":410.0,"currency_code":"KES","in_stock":true},{"title":"7\"","offer_id":43180953010247,"sku":"EPLRC0711","price":450.0,"currency_code":"KES","in_stock":true},{"title":"8\"","offer_id":43180953043015,"sku":"EPLRC0811","price":740.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EPLRC0611_000986.jpg?v=1788979581"},{"product_id":"emtop-9pcs-extra-long-hex-key-set-1-5-10mm-ehky1092","title":"EMTOP 9pcs Extra-Long Hex Key Set 1.5-10mm EHKY1092","description":"\u003cp\u003eThis nine-piece hex key set covers the socket-head fasteners that turn up daily on machinery, flat-pack furniture, bicycles and control panels. It is aimed at fundis, fitters and workshop hands who would rather carry a full metric range in one blister than hunt for a single loose key.\u003c\/p\u003e\u003cp\u003eEvery key is formed from \u003cstrong\u003eS2 tool steel\u003c\/strong\u003e, heat treated and chrome plated, so the drive ends resist rounding and the shafts shrug off workshop damp. The extra-long arm gives useful reach into recessed housings and adds leverage on a fastener that has been over-tightened, while the short leg still turns in a tight corner.\u003c\/p\u003e\u003cp\u003eSizes run from 1.5mm up to 10mm, which takes in most grub screws, machine screws and cap screws found on plant, appliances and light steel fabrication. Keep the set in a toolbox or van drawer for assembly, servicing and general maintenance. A complete set also avoids the common mistake of forcing a near-enough key into a socket, which is what rounds a fastener out in the first place.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e9-piece hex key set\u003c\/li\u003e\n\u003cli\u003eExtra-long arm\u003c\/li\u003e\n\u003cli\u003eMaterial: S2 steel\u003c\/li\u003e\n\u003cli\u003eSizes: 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm and 10mm\u003c\/li\u003e\n\u003cli\u003eHeat treated and chrome plated\u003c\/li\u003e\n\u003cli\u003eSupplied in double blister packaging\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180953272391,"sku":"EHKY1092","price":610.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EHKY1092_000895.jpg?v=1788979587"},{"product_id":"emtop-insulated-combination-pliers-1000v-180mm-and-200mm","title":"EMTOP Insulated Combination Pliers 1000V 180mm and 200mm","description":"\u003cp\u003eCombination pliers for electrical work, bringing a gripping jaw, serrated nose and side cutter together in one tool. Electricians and maintenance teams reach for them when twisting conductors, holding small components and cropping cable ends during installation and repair.\u003c\/p\u003e\u003cp\u003eInsulated handles stand a high pressure of 1000 V, which gives a margin of protection when working close to circuits that may still be energised. The head carries a black finish and polish, and the jaws are shaped to hold flats and round stock with equal confidence.\u003c\/p\u003e\u003cp\u003eTwo sizes are offered: the 180mm pair suits consumer units, trunking and panel work where space is tight, while the 200mm pair puts more leverage behind heavier conductors and general site work. Both are practical additions to an electrician's pouch, a plant maintenance kit or a hardware counter. Inspect the handle covering before each job and treat the pliers as an insulated tool only for as long as that covering remains whole and unbroken.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e7 in (180mm) size, model EPLRC0731\u003c\/li\u003e\n\u003cli\u003e8 in (200mm) size, model EPLRC0831\u003c\/li\u003e\n\u003cli\u003eInsulated handle standing high pressure of 1000 V\u003c\/li\u003e\n\u003cli\u003eBlack finish and polish\u003c\/li\u003e\n\u003cli\u003eSupplied in half double blister packaging\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"7\"","offer_id":43180954910791,"sku":"EPLRC0731","price":870.0,"currency_code":"KES","in_stock":true},{"title":"8\"","offer_id":43180954943559,"sku":"EPLRC0831","price":960.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EPLRC0731_000988.jpg?v=1788979601"},{"product_id":"emtop-insulated-diagonal-cutting-pliers-160mm-eplrd0631","title":"EMTOP Insulated Diagonal Cutting Pliers 160mm EPLRD0631","description":"\u003cp\u003eHigh-leverage diagonal cutting pliers sized at 6 in (160mm), built for electricians and panel builders who cut conductors, cable ties and small wire all day. The high-leverage geometry moves the pivot closer to the cutting edges so less hand effort is needed for each cut.\u003c\/p\u003e\u003cp\u003eHandles are insulated and stand a high pressure of 1000 V, keeping a barrier between the hand and the work when circuits cannot be proven dead. The head is finished in black and polished, and the tapered nose lets the edges reach into a crowded consumer unit or junction box without disturbing neighbouring cores.\u003c\/p\u003e\u003cp\u003eTypical use covers cutting conductors to length, trimming cable ties flush, cropping small nails and cleaning up terminations. It sits well in an installation pouch alongside combination pliers and insulated screwdrivers. As with any insulated hand tool, look over the sleeves before work begins and retire the pliers once the covering has been cut, burnt or worn back to the metal.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSize: 6 in (160mm)\u003c\/li\u003e\n\u003cli\u003eHigh-leverage diagonal cutting design\u003c\/li\u003e\n\u003cli\u003eInsulated handle standing high pressure of 1000 V\u003c\/li\u003e\n\u003cli\u003eBlack finish and polish\u003c\/li\u003e\n\u003cli\u003eSupplied in half double blister packaging\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180955336775,"sku":"EPLRD0631","price":840.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EPLRD0631_000991.jpg?v=1788979618"},{"product_id":"emtop-diagonal-cutting-pliers-7-inch-180mm-eplrd0711","title":"EMTOP Diagonal Cutting Pliers 7 Inch 180mm EPLRD0711","description":"\u003cp\u003eWhen a conductor has to be cut flush against a terminal or a board, angled jaws do what a combination plier cannot. The EMTOP EPLRD0711 is a 7 inch (180mm) diagonal cutter, the size most electricians, panel builders and maintenance technicians settle on for daily use.\u003c\/p\u003e\n\u003cp\u003eThe jaws meet at an angle that lets the cutting edges sit flat against a surface, leaving no protruding tail behind on a cable tie or a soldered lead. At 180mm the handles give enough leverage for copper conductors and light steel wire while the tool still fits comfortably in a pouch. The pliers are polished and coated with anti-rust oil to protect the edges and pivot during storage, and the two-colour handle gives a firm hold when repeated cuts are being made.\u003c\/p\u003e\n\u003cp\u003eSuited to trimming conductors in consumer units and control panels, cutting cable ties after bundling, stripping out old wiring, electronics and appliance repair, and light fencing and mesh work.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e EPLRD0711\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 7 inch \/ 180mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e polished with anti-rust oil\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle:\u003c\/strong\u003e two colour\u003c\/li\u003e\n\u003cli\u003eSupplied on a sliding card\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180956516423,"sku":"EPLRD0711","price":490.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EPLRD0711_000992.jpg?v=1788979635"},{"product_id":"emtop-pump-pliers-10in-250mm-40mm-jaw-eplrp1011","title":"EMTOP Pump Pliers 10in 250mm 40mm Jaw EPLRP1011","description":"\u003cp\u003eWater pump pliers at 10 in (250mm), the general-purpose gripping tool plumbers, pump technicians and maintenance crews carry for nuts, fittings, round stock and anything a spanner will not fit. The slip joint steps the jaw open in stages while keeping both handles in the same comfortable span.\u003c\/p\u003e\u003cp\u003eChrome vanadium steel gives the jaws the hardness to hold their serrations, and the head is finished in black and polished. A TPR three-colour handle delivers a strong, comfortable grip, which matters when the pliers are used to break a tight compression nut or a corroded fitting.\u003c\/p\u003e\u003cp\u003eMaximum clamping opening is 40mm, enough for common tap connectors, waste fittings, hose tails and light pipework. Angle the jaws to the work so the pull comes onto the flats and the tool is far less likely to slip. Adjust the slip joint until the jaws sit parallel on the fitting before force is applied, as a jaw at an angle grips on two points and rounds off the flats.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSize: 10 in (250mm)\u003c\/li\u003e\n\u003cli\u003eMaximum clamping opening: 40mm\u003c\/li\u003e\n\u003cli\u003eMaterial: chrome vanadium (Cr-V)\u003c\/li\u003e\n\u003cli\u003eSurface treatment: black finish and polish\u003c\/li\u003e\n\u003cli\u003eTPR three-colour handle for a strong, comfortable grip\u003c\/li\u003e\n\u003cli\u003eSupplied in half double blister packaging\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180957368391,"sku":"EPLRP1011","price":680.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EPLRP1011_000993.jpg?v=1788979652"},{"product_id":"emtop-4-piece-wood-chisel-set-6-25mm-cr-v-ewct0401","title":"EMTOP 4 Piece Wood Chisel Set 6-25mm Cr-V EWCT0401","description":"\u003cp\u003eHanging a door means cutting hinge recesses and a lock mortise, and no power tool does that as cleanly as a sharp chisel. The EMTOP EWCT0401 gives carpenters, joiners, shopfitters and DIY woodworkers the four widths that cover almost all of that work.\u003c\/p\u003e\n\u003cp\u003eBlades are chrome vanadium steel, a grade that takes a keen edge on a stone and holds it through a day of paring. Widths are 6mm for narrow grooves and cleaning corners, 12mm for general paring, 19mm for hinge leaves and 25mm for wide recesses and levelling. Each chisel measures 140mm long, short enough for controlled one-handed work yet long enough to sight down when paring to a line. The handles use a distinctive shaped design that seats in the palm for hand pressure and takes a mallet blow when chopping deeper.\u003c\/p\u003e\n\u003cp\u003eSuited to hinge and lock fitting, mortise and tenon joints, cleaning out router waste, trimming skirting and architrave, and general furniture making and repair.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e EWCT0401\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContents:\u003c\/strong\u003e 4 wood chisels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Cr-V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidths:\u003c\/strong\u003e 6mm, 12mm, 19mm, 25mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 140mm\u003c\/li\u003e\n\u003cli\u003eShaped handle design\u003c\/li\u003e\n\u003cli\u003eSupplied on a sliding card\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180961398855,"sku":"EWCT0401","price":1640.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EWCT0401_004495.jpg?v=1788979713"},{"product_id":"emtop-torx-key-set-9pcs-t10-t50-long-arm-ehky3091","title":"EMTOP Torx Key Set 9pcs T10-T50 Long Arm EHKY3091","description":"\u003cp\u003eNine long-arm torx keys covering T10 through T50, the sizes that appear on power tools, appliances, vehicles and machine guards. Star-drive fasteners are now common on imported equipment, and a proper torx key is the only way to remove one without damaging the head.\u003c\/p\u003e\u003cp\u003eKeys are made from S2 tool steel, heat treated and chrome plated, so the six lobes stay square under load and the shafts resist corrosion in a damp workshop. Long arms reach into recessed sockets and give the leverage needed to break a fastener that has been assembled with thread lock.\u003c\/p\u003e\u003cp\u003eSizes supplied are T-10, T-15, T-20, T-25, T-27, T-30, T-40, T-45 and T-50. Keep the set with your hex keys so both fastener families are covered when stripping down equipment for service. Seat the key fully before applying force, as a partly engaged lobe strips the socket and turns a five-minute job into a drilling exercise. Wipe the keys down after use so grit does not pack into the drives.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e9-piece torx key set\u003c\/li\u003e\n\u003cli\u003eLong arm\u003c\/li\u003e\n\u003cli\u003eMaterial: S2 steel\u003c\/li\u003e\n\u003cli\u003eSizes: T-10, T-15, T-20, T-25, T-27, T-30, T-40, T-45 and T-50\u003c\/li\u003e\n\u003cli\u003eHeat treated and chrome plated\u003c\/li\u003e\n\u003cli\u003eSupplied in double blister packaging\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180961497159,"sku":"EHKY3091","price":570.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EHKY3091_000896.jpg?v=1788979725"},{"product_id":"emtop-quick-bar-clamp-63-x-300mm-60kg-force-eclpq60201","title":"EMTOP Quick Bar Clamp 63 x 300mm 60kg Force ECLPQ60201","description":"\u003cp\u003eQuick bar clamp with a 63 x 300mm clamping size, worked with one hand so the other stays free to position the workpiece. Joiners, cabinet makers and site carpenters use clamps of this type for glue-ups, holding jigs and pinning components while a fixing is driven.\u003c\/p\u003e\u003cp\u003eSqueezing the pistol grip walks the sliding jaw along the bar and builds up to 60kg of clamping force, held until the release lever is pressed. The iron ruler bar measures 5 x 18mm in thickness and width, which resists the bow that makes a light clamp lose grip as pressure comes on.\u003c\/p\u003e\u003cp\u003eTypical work covers edge-gluing boards, holding mitres while the adhesive grabs, clamping a straight edge to guide a circular saw, and steadying material on a bench or trestle. Buy them in pairs, as most clamping tasks need at least two. Slip a scrap offcut between the jaw and any surface that will be seen, and take the pressure off once the adhesive has cured rather than leaving the clamp loaded.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eClamp size: 63 x 300mm\u003c\/li\u003e\n\u003cli\u003eMaximum clamping force: 60kg\u003c\/li\u003e\n\u003cli\u003eThickness and width of iron ruler bar: 5 x 18mm\u003c\/li\u003e\n\u003cli\u003eSupplied with a label\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180965036103,"sku":"ECLPQ60201","price":650.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/ECLPQ60201_000817.jpg?v=1788979761"},{"product_id":"emtop-quick-bar-clamp-63-x-450mm-18in-60kg-eclpq60301","title":"EMTOP Quick Bar Clamp 63 x 450mm 18in 60kg ECLPQ60301","description":"\u003cp\u003eLonger version of the quick bar clamp, with a 63 x 450mm clamping size for panels, door frames and assemblies that a 300mm bar cannot span. The trigger action is worked with one hand, which makes it straightforward to hold a joint closed and clamp it in a single movement.\u003c\/p\u003e\u003cp\u003ePumping the grip advances the sliding jaw and builds up to 60kg of clamping force on the work, released with a lever when the job is done. A 5 x 18mm iron ruler bar underpins that pressure and keeps the jaws parallel across the wider opening.\u003c\/p\u003e\u003cp\u003eCarpenters, shopfitters and workshop benches use them for laminating, carcass assembly, holding formwork sections and securing a guide rail across a sheet before cutting. The extra reach also helps when clamping through a frame rather than across an edge. Spread the load with a batten when clamping wide panels, so pressure reaches the middle of the joint instead of pinching the work only where the jaws sit.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eClamp size: 63 x 450mm\u003c\/li\u003e\n\u003cli\u003eMaximum clamping force: 60kg\u003c\/li\u003e\n\u003cli\u003eThickness and width of iron ruler bar: 5 x 18mm\u003c\/li\u003e\n\u003cli\u003eSupplied with a label\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180966248519,"sku":"ECLPQ60301","price":740.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/ECLPQ60301_000818.jpg?v=1788979780"},{"product_id":"emtop-quick-release-bar-clamp-for-workshop-eclpq80241","title":"EMTOP Quick Release Bar Clamp for Workshop ECLPQ80241","description":"\u003cp\u003eClamping is what turns a dry assembly into a joint, and a trigger clamp does it with one hand while the other holds the work in place. Squeezing the grip walks the jaw along the bar until the pads are tight; a lever releases it just as quickly.\u003c\/p\u003e\u003cp\u003eCushioned pads spread the pressure so softwood and finished surfaces are not dented.\u003c\/p\u003e\u003cp\u003eJoiners use them to hold glued assemblies, welders to hold a set-up before tacking, and fitters to pin a workpiece to the bench while it is cut or drilled.\u003c\/p\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180966740039,"sku":"ECLPQ80241","price":2070.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/ECLPQ80241_000819.jpg?v=1788979798"},{"product_id":"emtop-jack-stand-3-tonne-vehicle-support-ehjs20301","title":"EMTOP Jack Stand 3 Tonne Vehicle Support EHJS20301","description":"\u003cp\u003eHeavier vehicles need a stand with headroom in its rating, and this EMTOP axle stand is rated at \u003cstrong\u003e3 tonnes\u003c\/strong\u003e. That extra margin over the lighter stands suits larger pick-ups, four-wheel drives, vans and light trucks, used in pairs at the lifting points the vehicle maker specifies.\u003c\/p\u003e\u003cp\u003eOnce the jack has done the lifting, the stand takes over. Its height locks mechanically, so the vehicle sits on steel rather than on hydraulic pressure. Place it on firm, level ground, lower the load onto it gradually and rock the body once to check it is settled before anyone goes underneath.\u003c\/p\u003e\u003cp\u003eCommercial workshops, transport yards, tyre fitters and serious home mechanics use them for brake and exhaust work, suspension repairs, gearbox jobs and underbody inspection.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLoad capacity: 3 tonnes\u003c\/li\u003e\n\u003cli\u003eModel: EHJS20301\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180968345671,"sku":"EHJS20301","price":8190.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EHJS20301_005841.jpg?v=1788979825"},{"product_id":"emtop-quick-release-bar-clamp-one-handed-eclpq80361","title":"EMTOP Quick Release Bar Clamp One Handed ECLPQ80361","description":"\u003cp\u003eOne-handed clamps changed how benches are worked, because the hand that used to spin a screw thread can stay on the workpiece instead. Pumping the trigger draws the sliding jaw up to the work and applies pressure; the release lever backs it straight off.\u003c\/p\u003e\u003cp\u003ePadded faces protect finished timber, and the bar takes a straight pull without twisting the assembly out of square.\u003c\/p\u003e\u003cp\u003eThey are equally useful for gluing up frames and carcasses, holding steel for tacking, and pinning a board to a trestle before cutting.\u003c\/p\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180968607815,"sku":"ECLPQ80361","price":2500.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/ECLPQ80361_000820.jpg?v=1788979832"},{"product_id":"emtop-jack-stand-2-tonne-vehicle-support-ehjs20201","title":"EMTOP Jack Stand 2 Tonne Vehicle Support EHJS20201","description":"\u003cp\u003eNo one should work under a vehicle held up by a hydraulic jack. A jack lifts; a stand holds. This EMTOP axle stand is rated at \u003cstrong\u003e2 tonnes\u003c\/strong\u003e, which covers saloons, small pick-ups and light commercial vehicles once the load is shared across a pair of stands placed at the manufacturer's lifting points.\u003c\/p\u003e\u003cp\u003eThe stand is height-adjustable and locks into position, so the vehicle rests on solid steel rather than on hydraulic pressure that can bleed away. Set it on level, firm ground, lower the vehicle onto it slowly and give the body a firm push to confirm it is stable before going underneath.\u003c\/p\u003e\u003cp\u003eGarages, fleet workshops, tyre bays and home mechanics use them for oil changes, exhaust and brake work, suspension jobs and anything that needs time spent under the chassis.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLoad capacity: 2 tonnes\u003c\/li\u003e\n\u003cli\u003eModel: EHJS20201\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180969033799,"sku":"EHJS20201","price":6470.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EHJS20201_005840.jpg?v=1788979841"},{"product_id":"emtop-356-piece-tool-chest-set-ehts03561-trade-kit","title":"EMTOP 356 Piece Tool Chest Set EHTS03561 Trade Kit","description":"\u003cp\u003eAt 356 pieces, this EMTOP chest set is the largest of the range and is intended for a professional workshop rather than an occasional user. The point of a set this size is coverage: the technician reaches for the right size first time instead of improvising with the nearest fit.\u003c\/p\u003e\u003cp\u003eComprehensive sets of this type usually bring together sockets across several drive sizes, combination spanners, screwdrivers and bits, pliers and cutters, keys and general service tools, held in trays within a carry chest. No manufacturer specification sheet was available for this model, so check the detailed contents list before ordering.\u003c\/p\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180970442823,"sku":"EHTS03561","price":163180.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EHTS03561_005837.jpg?v=1788979876"},{"product_id":"emtop-spring-clamp-4in-100mm-12kg-force-eclps0401","title":"EMTOP Spring Clamp 4in 100mm 12kg Force ECLPS0401","description":"\u003cp\u003eSpring clamp at 4 in (100mm), the fastest way to hold two pieces together while glue grabs or a fixing goes in. One squeeze opens the jaws and releasing them applies the pressure, so the clamp can be placed and set with a single hand.\u003c\/p\u003e\u003cp\u003eClamping force is 12kg, enough for light joinery, holding a template, pinning fabric or sheet against a frame and keeping a cable or hose out of the way. The black clip body is compact, and the jaws open to a maximum of 50mm, which covers most board thicknesses and small sections.\u003c\/p\u003e\u003cp\u003eWorkshops keep a handful of these on a rail because they cost little and save time on tasks that do not justify a bar clamp. Useful for signage, upholstery, model work, tarpaulins and holding a spirit level or straight edge steady during marking out. A piece of card or rubber under the jaws protects a finished face, and a pair of these will hold a straight edge steady while a line is scribed across a sheet.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSize: 4 in\u003c\/li\u003e\n\u003cli\u003eLength: 100mm\u003c\/li\u003e\n\u003cli\u003eClamping force: 12kg\u003c\/li\u003e\n\u003cli\u003eMaximum jaw opening: 50mm\u003c\/li\u003e\n\u003cli\u003eBlack clip body\u003c\/li\u003e\n\u003cli\u003eSupplied with a label\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180972310599,"sku":"ECLPS0401","price":110.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/ECLPS0401_000821.jpg?v=1788979922"},{"product_id":"emtop-spring-clamp-for-quick-holding-eclps0601","title":"EMTOP Spring Clamp for Quick Holding ECLPS0601","description":"\u003cp\u003eSpring clamps are the fastest holding tool on the bench. Squeeze the handles, place the jaws, let go, and the spring does the rest, which is exactly what is wanted when a part only needs holding for a moment.\u003c\/p\u003e\u003cp\u003eThey suit light gluing, holding templates and jigs, pinning sheeting and dust screens, keeping cable and hose out of the way, and clamping stock against a fence while a cut is set up.\u003c\/p\u003e\u003cp\u003eCheap enough to keep in numbers, and worth having a handful of them scattered around a workshop.\u003c\/p\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180973490247,"sku":"ECLPS0601","price":170.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/ECLPS0601_000822.jpg?v=1788979937"},{"product_id":"emtop-59-piece-tool-set-in-metal-box-ehts00591","title":"EMTOP 59-Piece Tool Set in Metal Box EHTS00591","description":"\u003cp\u003eFifty-nine pieces chosen well will strip and rebuild most machinery, and this metal-boxed set concentrates on the sizes that come up daily rather than padding the count. Twelve combination spanners run from 8 to 22mm, the standard span for vehicle, pump and generator fasteners.\u003c\/p\u003e\u003cp\u003eThe socket section carries eighteen 1\/2 inch hexagonal sockets from 8 to 32mm, a 45-tooth ratchet for working in tight arcs, 125 and 250mm extension bars, a universal joint, a 375mm flex handle and two spark plug sockets at 16 and 21mm. Gripping and cutting is covered by 8 inch combination pliers, 6 inch long nose pliers, 7 inch diagonal cutters, a 10 inch adjustable spanner and a 10 inch curved jaw locking wrench. Eight screwdrivers in slotted and Phillips patterns from 75 to 200mm, plus nine hex keys from 1.5 to 10mm, complete it.\u003c\/p\u003e\u003cp\u003eThe metal box takes rough handling in a pickup and stacks in a store, which suits maintenance teams, matatu and lorry workshops, and contractors who move between sites.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: EHTS00591\u003c\/li\u003e\n\u003cli\u003e59-piece tool set\u003c\/li\u003e\n\u003cli\u003e12 x combination spanners: 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 22mm\u003c\/li\u003e\n\u003cli\u003e8 x screwdrivers: SL3 x 75mm, SL4 x 100mm, SL5 x 125mm, SL6 x 100mm, SL8 x 200mm, PH1 x 80mm, PH2 x 100mm, PH3 x 200mm\u003c\/li\u003e\n\u003cli\u003e18 x 1\/2 inch hexagonal sockets: 8 to 32mm\u003c\/li\u003e\n\u003cli\u003e1 x 1\/2 inch ratchet wrench, 45 tooth\u003c\/li\u003e\n\u003cli\u003e2 x 1\/2 inch extension bars: 125mm (5 inch) and 250mm (10 inch)\u003c\/li\u003e\n\u003cli\u003e2 x spark plug sockets, 1\/2 inch drive, 16mm and 21mm\u003c\/li\u003e\n\u003cli\u003e1 x 1\/2 inch universal joint\u003c\/li\u003e\n\u003cli\u003e1 x 1\/2 inch flex handle, 375mm\u003c\/li\u003e\n\u003cli\u003e1 x 8 inch combination pliers\u003c\/li\u003e\n\u003cli\u003e1 x 6 inch long nose pliers\u003c\/li\u003e\n\u003cli\u003e1 x 7 inch diagonal cutting pliers\u003c\/li\u003e\n\u003cli\u003e1 x 10 inch adjustable wrench\u003c\/li\u003e\n\u003cli\u003e1 x 10 inch curved jaw lock wrench\u003c\/li\u003e\n\u003cli\u003e9 x hex keys: 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10mm\u003c\/li\u003e\n\u003cli\u003ePacked in a metal box\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180973981767,"sku":"EHTS00591","price":22420.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EHTS00591_000902.jpg?v=1788979958"}],"url":"https:\/\/ahihqtraders.com\/collections\/hand-tools.oembed","provider":"AHIHQ Traders","version":"1.0","type":"link"}