{"title":"Henkel","description":"\u003cp\u003eHenkel construction and wood adhesives, stocked in Nairobi — the Pattex, Ponal, Tangit, Sista and Conta ranges.\u003c\/p\u003e\u003cp\u003eCovers water-based and solvent-based construction adhesives, polymer adhesive-sealants, professional and D4 water-resistant wood glues, PVC-U solvent cement, contact adhesive, general purpose silicone and PU foam.\u003c\/p\u003e\u003cp\u003eSold by the piece or by the carton — every product page names its pack size and the carton rate.\u003c\/p\u003e","products":[{"product_id":"pattex-wood-glue-economy-mitiplast","title":"Pattex Wood Glue Economy (Mitiplast)","description":"\u003cp\u003eThis is the wood glue the Nairobi trade calls “Mitiplast” — \u003cem\u003emiti\u003c\/em\u003e\nbeing wood. That name is a local nickname, not the name on the bottle: the pack reads\n\u003cstrong\u003ePattex® Wood Glue Economy\u003c\/strong\u003e, carries the Henkel logo, and carries the Kenya Bureau\nof Standards Standardisation Mark \u003cstrong\u003eSM#17471\u003c\/strong\u003e. Henkel makes Pattex in Nairobi alongside\nPonal, Pritt and Tangit. We have put both names on this page so that whichever one you know it by,\nyou find it.\u003c\/p\u003e\n\u003cp\u003eIt is Henkel's economy grade and it sits below Ponal Professional in the same maker's range, at\nroughly 45% of the price per kilo in the 1 kg size. That is what the grade is for: high-volume,\neveryday wood work. Furniture workshops, fundis, school and site carpentry, and hardware shops selling\noff the shelf. Being straight about the difference: Henkel does not publish what, if anything, separates\nthe two in chemistry or in water resistance — only that one is its professional line and the other\nits economy line, and “Economy” is Henkel's own word on the pack. The pack's side label\ncarries Henkel's instructions for open time and for cold or hot pressing with presses or clamps, and\ntells you to stir well before use.\u003c\/p\u003e\n\u003cp\u003eSold by the full carton in 250 g, 500 g and 1 kg. Two honest notes. The pack is\nlabelled as a wood glue, so ignore the listings elsewhere that claim it also bonds metal and plastics\n— Henkel does not say that. And as with Ponal Professional, Henkel publishes no EN 204\nwater-resistance class for it; the figures printed on the pack's side label are not legible in any\nphotograph we can find. If you need the open and press times, ask us and we will read them off a\nphysical pack for you. The photographs here are of the 500 ml and 1 litre bottles. We have no\nphotograph of the 250 g pack: the supplier's own 250 g listing carries its 1 kg\nphotograph, and the label in that picture reads 1000 ml.\u003c\/p\u003e","brand":"Henkel","offers":[{"title":"Carton of 24 x 250 g","offer_id":43214003011655,"sku":"HKL-PTXECO-250","price":2640.0,"currency_code":"KES","in_stock":true},{"title":"Carton of 24 x 500 g","offer_id":43214003044423,"sku":"HKL-PTXECO-500","price":4080.0,"currency_code":"KES","in_stock":true},{"title":"Carton of 12 x 1 kg","offer_id":43214003077191,"sku":"HKL-PTXECO-1K","price":4320.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/pattex-wood-glue-economy-mitiplast.jpg?v=1789475229"},{"product_id":"ponal-professional-white-wood-glue","title":"Ponal Professional White Wood Glue","description":"\u003cp\u003ePonal Professional is Henkel's white wood glue for the joinery trade. The pack\nis printed “Ponal PROFESSIONAL White Wood Glue” and carries the Henkel logo with the line\n“Quality from Henkel”. Henkel makes the Ponal line at its plant in Nairobi and describes\nPonal as its professional brand for carpenters. What the pack tells you is that this is a white\nwood glue, and that is where Henkel's published information for these sizes ends — so this\npage states what is printed on the pack and nothing more.\u003c\/p\u003e\n\u003cp\u003eHenkel publishes no application list for these sizes, so what follows is how the trade here uses\nit rather than a manufacturer instruction: furniture assembly, cabinet carcassing, edge jointing and\npanel work, spread with a brush or a spreader onto clean, well-fitted timber and then cramped.\nCarpenters, furniture makers, shopfitters and hardware retailers buy it by the carton, and the\n4 kg bucket and the 30 kg pail are the sizes that suit a workshop running several benches.\u003c\/p\u003e\n\u003cp\u003eSold here by the full carton in four sizes, plus the 30 kg pail. One thing to know before you\norder: Henkel\npublishes no EN 204 water-resistance class (D1 to D4) for this glue, and no open, press or\nsetting times. Sellers in Kenya quote D2, D3 and “D3 waterproof” for the same product,\nwhich tells you that none of them holds the datasheet — so we quote none of it. If your work\nhas to survive water — exterior joinery, bathroom or kitchen carcassing, anything that will\nsee rain — tell us before you buy. We will ask Henkel Kenya for the datasheet, or point you\nto Pattex PUR Wood Glue, which Henkel does classify D4 to DIN EN 204.\u003c\/p\u003e\n\u003cp\u003eThe 30 kg pail is Ponal Professional in Henkel's industrial pack, which is why it looks nothing\nlike the bottles. The label carries the Aquence mark and reads “AQUENCE WL PROFESSIONAL PONAL”\nand “Waterbased Adhesive”, with contents 30 kg, a batch number, and “PONAL\nPROFESSIONAL” printed as the trade name; the Henkel roundel is on the drum. Aquence is Henkel's label\nfor its waterbased industrial adhesives. That is what the pail says it is, and it is worth being precise\nabout the limit of it: Henkel publishes no data for the pail any more than for the bottles, so we are not\ngoing to tell you the two are chemically identical — only that Henkel calls both Ponal Professional.\nThe pail carries its own hazard triangle and handling marks; read them, and ask us for the data sheet\nbefore you put it into production. It is the size for a shop gluing panel all day, and it is the cheapest\nper kilo of any pack here.\u003c\/p\u003e","brand":"Henkel","offers":[{"title":"Carton of 24 x 250 g","offer_id":43214003142727,"sku":"HKL-PONPRO-250","price":6000.0,"currency_code":"KES","in_stock":true},{"title":"Carton of 24 x 500 g","offer_id":43214003175495,"sku":"HKL-PONPRO-500","price":11280.0,"currency_code":"KES","in_stock":true},{"title":"Carton of 12 x 1 kg","offer_id":43214003208263,"sku":"HKL-PONPRO-1K","price":9360.0,"currency_code":"KES","in_stock":true},{"title":"Carton of 4 x 4 kg","offer_id":43214003241031,"sku":"HKL-PONPRO-4K","price":11320.0,"currency_code":"KES","in_stock":true},{"title":"Pail of 30 kg","offer_id":43214003273799,"sku":"HKL-PONPRO-30K","price":19730.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/ponal-professional-white-wood-glue.jpg?v=1789475274"},{"product_id":"tangit-pvc-u-special-adhesive","title":"Tangit PVC-U Special Adhesive","description":"\u003cp\u003eTangit is Henkel's solvent cement for rigid PVC pipework and the one most Kenyan plumbers ask for\nby name. The pack here reads \u003cstrong\u003eTangit PVC-U — Special Adhesive \/ Gundi Spesheli\u003c\/strong\u003e,\n“Henkel: Quality for Professionals”, and on the carton “Special Cement for rigid PVC\nfittings and pipes”. The tin is marked “Made by Henkel Kenya Ltd”, Nairobi. It is a\ntetrahydrofuran-based, gap-filling, thixotropic cement that cures by solvent evaporation, and the pack\ncarries the ASTM D-2564, EN 14680 and EN 14814 marks, a CE mark and a Kenya Bureau of\nStandards Standardisation Mark.\u003c\/p\u003e\n\u003cp\u003eHenkel approves it for PVC-U pressure piping to EN 1452 and EN ISO 15493 and for\nnon-pressure piping to EN 1329 — mains and rising mains, irrigation, borehole delivery lines,\npool circulation, soil and waste. It is not the product for PVC-C or ABS, for which Henkel sells separate\nTangit cements, and PP and PE pressure pipe fall outside its approved scope altogether. Plumbers take the\nsmall tubes for repairs and small-bore work and the tins for a pipeline; note that\nHenkel states tube application should not be used on pipe above d90 mm. From d90 upwards Henkel\nwants the adhesive applied to pipe and socket at the same time by two people, and from d160 a pipe joiner\nused to bring the joint home.\u003c\/p\u003e\n\u003cp\u003eSold by the full carton in five sizes. Henkel's published data runs to d315 mm pipe, and Henkel is\nclear that PVC-U pressure work needs trained installers working to the pipe maker's own instructions\nalongside this sheet.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003eFrom the pack, and from Henkel's Tangit PVC-U technical data sheet v.1, November 2024.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrinted on the pack:\u003c\/strong\u003e pressure resistant up to 16 bar; complies with DIN 16970 (German) and BS 4346-3 (British) specifications; temperature range −30 °C to +60 °C; ASTM D-2564, EN 14680 and EN 14814; CE mark; a Kenya Bureau of Standards Standardisation Mark (SM#640 on the tube carton — the tins carry a different number)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade by:\u003c\/strong\u003e Henkel Kenya Ltd, Nairobi (printed on the tin)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemistry:\u003c\/strong\u003e solvent-borne adhesive based on stabilised tetrahydrofuran (THF); gap filling and thixotropic; cures physically by solvent evaporation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDensity:\u003c\/strong\u003e 0.96 g\/cm³\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApproved pipe material:\u003c\/strong\u003e PVC-U to EN ISO 15493, EN 1452 and EN 1329; pressure systems to EN 14814 with diameter tolerances up to +0.6 mm; non-pressure systems to EN 14680\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpen time:\u003c\/strong\u003e approx. 4 minutes at 20 °C — 3 min at 25 °C, 2 min at 30 °C, 1 min at 40 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo not move the joint:\u003c\/strong\u003e for the first 5 minutes after bonding, extended to at least 15 minutes below +10 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBefore lowering into a trench:\u003c\/strong\u003e 10 to 12 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinal strength:\u003c\/strong\u003e 24 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBefore filling or leak testing:\u003c\/strong\u003e 24 hours after the last joint, up to a test pressure of 1.5 × PN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBefore applying operating pressure:\u003c\/strong\u003e a minimum of 1 hour per bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication temperature:\u003c\/strong\u003e +5 °C to +35 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBelow +25 °C:\u003c\/strong\u003e Henkel requires special installation technique — warm the pipe end and socket to +25 to +30 °C with an explosion-proof hot-air blower and keep the finished joint at +25 to +30 °C for about 10 minutes. Below +5 °C, pipe and fittings also become more vulnerable to impact\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConsumption per joint:\u003c\/strong\u003e d20 3 g · d32 5 g · d50 9 g · d75 20 g · d110 60 g · d160 120 g · d200 200 g · d315 500 g (Henkel's maximum laboratory values)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsertion depth:\u003c\/strong\u003e d20 16 mm · d50 31 mm · d110 61 mm · d160 86 mm · d315 164 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrush size:\u003c\/strong\u003e d32 no. 8 round · d40–d63 no. 1 flat · d75–d160 no. 2 flat · above d300 no. 3 flat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTube application:\u003c\/strong\u003e Henkel states it should not be used on pipe exceeding d90\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFurther approvals Henkel publishes:\u003c\/strong\u003e CE marking with DoP 00131; WRAS; supervised by SKZ Würzburg and KIWA Nederland B.V.; KIWA drinking water application certificate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleaner:\u003c\/strong\u003e Tangit Cleaner PVC-U\/C\/ABS, applied on white tissue; surfaces must be dry before the adhesive goes on\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShelf life:\u003c\/strong\u003e 24 months at +20 °C in the unopened can; do not store below +5 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReady for use:\u003c\/strong\u003e must under no circumstances be diluted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisposal:\u003c\/strong\u003e product remains are special waste. Only recycle well-emptied containers with dried adhesive residue and no solvent vapour\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow the pack says to use it\u003c\/h3\u003e\n\u003cp\u003eIn the pack's own words: before use, stir the cement thoroughly. Using a flat brush, apply a thin,\neven layer to the inside of the fitting — \u003cstrong\u003ework axially, from the inside to the end of the\nfitting or pipe\u003c\/strong\u003e. Apply a thicker layer to the outside of the pipe, and insert it into the\nfitting without twisting. Remove excess adhesive with absorbent paper. The pack adds three notes:\ncleanliness is essential to making an effective joint, close the tube firmly after use, and ensure\nadequate ventilation while in use.\u003c\/p\u003e\n\u003ch3\u003eSafety — read this before use\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHenkel states plainly: \u003cstrong\u003e“Never use PVC piping systems with compressed air or gas!”\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eTangit is flammable. Solvent vapours are heavier than air, collect at ground level and can form explosive mixtures. Ventilate the work area; no smoking, welding, open flame or sparking there or in adjoining rooms, and avoid any static charge.\u003c\/li\u003e\n\u003cli\u003eProlonged inhalation of solvent vapours may be injurious to health, which is why used tissue goes into a closed container rather than being left lying about.\u003c\/li\u003e\n\u003cli\u003eRemove accumulated vapour before any welding nearby: fill the pipes with water, flush and purge them well. Do not close or seal pipes while the joints are drying.\u003c\/li\u003e\n\u003cli\u003eFlush the pipeline thoroughly before it goes into service to clear residual solvent vapour.\u003c\/li\u003e\n\u003cli\u003eBoth the adhesive and the Tangit cleaner attack PVC-U, so keep spilled adhesive and cleaner off the pipe and fittings.\u003c\/li\u003e\n\u003cli\u003eWear gloves, wash hands repeatedly during work, keep used tissue in a closed container, and read the safety data sheet before use.\u003c\/li\u003e\n\u003cli\u003eIf it gets in your eyes, rinse thoroughly with water and get medical advice. Take off any clothing stained with adhesive straight away.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA note on two older claims you may see elsewhere: Henkel's Southern Africa datasheet for this family\nsays the product can be used on gas piping and on ABS. Henkel's current global datasheet does neither\n— it prohibits gas service outright and scopes the product to PVC-U. We carry the newer and\nstricter wording.\u003c\/p\u003e","brand":"Henkel","offers":[{"title":"Carton of 36 x 50 g","offer_id":43214015234119,"sku":"HKL-TNG-50","price":7920.0,"currency_code":"KES","in_stock":true},{"title":"Carton of 30 x 100 g","offer_id":43214015266887,"sku":"HKL-TNG-100","price":10500.0,"currency_code":"KES","in_stock":true},{"title":"Carton of 24 x 250 g","offer_id":43214015299655,"sku":"HKL-TNG-250","price":14640.0,"currency_code":"KES","in_stock":true},{"title":"Carton of 24 x 500 g","offer_id":43214015332423,"sku":"HKL-TNG-500","price":24480.0,"currency_code":"KES","in_stock":true},{"title":"Carton of 12 x 1 kg","offer_id":43214015365191,"sku":"HKL-TNG-1K","price":21240.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/tangit-pvc-u-special-adhesive.jpg?v=1789475356"},{"product_id":"pattex-pl-100-water-based-construction-adhesive","title":"Pattex PL 100 Water Based Construction Adhesive","description":"\u003cp\u003ePL 100 is the water-based member of Henkel's three PL construction adhesives — a\nsolvent-free polymer dispersion, Henkel article 1797916, with the highest initial grab of the three at\n180 kg\/m². It is an interior adhesive and it needs at least one absorbent face in order to\ncure: plaster, concrete, cellular concrete, pumice, fibre concrete, plasterboard and gypsum board,\nwood materials and chipboard, and rigid polyurethane foam.\u003c\/p\u003e\n\u003cp\u003eThis is the cartridge for skirting, architrave, decorative mouldings, ceiling roses, wall panels and\ninsulation board — the jobs where you want the piece to stay put the moment you press it on,\nindoors, with no solvent and no smell. It is over-paintable and bridges gaps up to 10 mm, which\ncovers a wall that is not quite flat. Interior fit-out contractors, dry-liners and gypsum installers\nbuy it by the carton.\u003c\/p\u003e\n\u003cp\u003eSold by the full carton of 12. Two limits worth knowing: PL 100 is for interior use and is not\nsuitable for permanent water contact, and it will not cure if both faces are non-absorbent — on\nmetal to glass or tile to tile, use PL 150 or PL 200 instead. Henkel asks that heavy items be\nsupported for at least 24 hours.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003eHenkel, Pattex PL 100 technical data sheet.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eArticle number (IDH):\u003c\/strong\u003e 1797916\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemistry:\u003c\/strong\u003e water-based polymer dispersion, solvent free\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInitial grab:\u003c\/strong\u003e 180 kg\/m²\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinal strength:\u003c\/strong\u003e up to 6 N\/mm² (shear strength of wood at room temperature)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpen time:\u003c\/strong\u003e approx. 15 minutes at 23 °C; corrections possible within that time\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull cure:\u003c\/strong\u003e minimum 48 hours at 2 mm layer thickness; support heavy items for at least 24 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication temperature:\u003c\/strong\u003e +10 °C to +40 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eService temperature:\u003c\/strong\u003e −20 °C to +70 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGap bridging:\u003c\/strong\u003e up to 10 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e approx. 300 g\/m² applied full-surface, or approx. 11 m as a 6 mm bead\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOver-paintable:\u003c\/strong\u003e yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOdour:\u003c\/strong\u003e neutral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot for:\u003c\/strong\u003e exterior use; permanent water immersion; two non-absorbent surfaces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOn the pack:\u003c\/strong\u003e White — Blanc; “dispersion — acrylique”; interior fix; for porous materials; instant tack; KEBS mark UCR2011001514320\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Henkel","offers":[{"title":"Carton of 12 x 280 ml","offer_id":43214015561799,"sku":"HKL-PL100","price":8880.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/pattex-pl-100-water-based-construction-adhesive.jpg?v=1789475384"},{"product_id":"pattex-pl-150-solvent-based-construction-adhesive","title":"Pattex PL 150 Solvent Based Construction Adhesive","description":"\u003cp\u003ePL 150 is the solvent-based member of the PL family, Henkel article 1797913, and it is the\ngeneral-purpose one. Because it dries by solvent evaporation rather than needing an absorbent face, it\nworks on absorbent and non-absorbent materials alike: brick, ceramics, concrete, hardboard, drywall,\nplywood, stone, MDF, wood, metal and rigid PVC. Henkel publishes it for both interior and exterior use,\nwith permanent bonds it describes as UV-resistant, weather-resistant and vibration-resistant.\u003c\/p\u003e\n\u003cp\u003eHenkel gives its application range as −10 °C to +35 °C, which in Kenya\nmatters less for cold than for what it tells you about the cure: this is the PL grade that still grabs\nwhere a water-based dispersion struggles. Battens and trim onto blockwork, metal profiles onto masonry,\nfascia and cladding boards, signage, and mounting work you would otherwise drill and plug. Initial tack\nis 100–120 kg\/m² with immediate bonding, so on most jobs it holds without mechanical\nfixings.\u003c\/p\u003e\n\u003cp\u003eSold by the full carton of 12. Henkel states it is water-resistant but not for constant moisture\nexposure, and that it must not be used on polyethylene, PTFE or acrylic glass. Where both faces are\nnon-absorbent, Henkel's method is double adhesion — spread on both sides, let it flash off, then\nbring the two together. It is solvent-based, so ventilate and keep it away from flame.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003eHenkel, Pattex PL 150 technical data sheet.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eArticle number (IDH):\u003c\/strong\u003e 1797913\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemistry:\u003c\/strong\u003e solvent-based polymer construction adhesive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInitial grab:\u003c\/strong\u003e high initial tack, 100–120 kg\/m², with immediate bonding\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinal strength:\u003c\/strong\u003e up to 6 N\/mm² (shear strength of wood at room temperature)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpen time:\u003c\/strong\u003e approx. 10 minutes at 23 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull cure:\u003c\/strong\u003e minimum 48 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication temperature:\u003c\/strong\u003e −10 °C to +35 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eService temperature:\u003c\/strong\u003e −20 °C to +80 °C fully cured\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater resistance:\u003c\/strong\u003e water-resistant, but not for constant moisture exposure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGap bridging:\u003c\/strong\u003e maximum 10 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e approx. 300 g\/m² applied full-surface, or approx. 11 m as a 6 mm bead\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOver-paintable:\u003c\/strong\u003e yes, once dry\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShelf life:\u003c\/strong\u003e 18 months from the date of manufacture\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot for:\u003c\/strong\u003e polyethylene, PTFE or acrylic glass; constant moisture exposure\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Henkel","offers":[{"title":"Carton of 12 x 380 ml","offer_id":43214015725639,"sku":"HKL-PL150","price":11280.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/pattex-pl-150-solvent-based-construction-adhesive.jpg?v=1789475414"},{"product_id":"pattex-pl-200-polymer-construction-adhesive-sealant","title":"Pattex PL 200 Polymer Construction Adhesive and Sealant","description":"\u003cp\u003ePL 200, Henkel article 1797914, is the one in this family that both seals and bonds. It is a\nsilane-curing FlexTec polymer — isocyanate-free and solvent-free, curing on moisture — and it\nis transparent when cured. That chemistry is the reason it is the only one of the three you can put on a\nmirror, on glass, on UPVC, or onto a wet surface and even under water.\u003c\/p\u003e\n\u003cp\u003eUse it where the joint has to move or weather: glass and mirror fixing, for which Henkel cites\nDIN EN 1036-1, metal and UPVC trim, exterior work, wet areas, and any bond between two\nmaterials that will expand at different rates. It bridges gaps to 20 mm, twice what PL 100 and\nPL 150 manage, and it is over-paintable and sandable once cured. Henkel rates it to hold up to\n50 kg\/m² inside and outside buildings.\u003c\/p\u003e\n\u003cp\u003eSold by the full carton of 12. It is worth being clear about what the higher price buys, because it is\nnot raw strength: PL 200's final strength is about 3.0 N\/mm² against up to\n6 N\/mm² for PL 100 and PL 150, and its initial grab is 50 kg\/m² against\nPL 100's 180. What it buys is flexibility, a neutral cure, mirror and glass safety, wet and\nunderwater application, exterior durability, a 20 mm gap and a sealant function. For interior\nskirting onto plaster, PL 100 is the correct answer and the cheaper one. Do not use PL 200 on\npolyethylene, polypropylene, PTFE, acrylic glass, plasticised PVC, copper or brass.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003eHenkel, Pattex PL 200 technical data sheet.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eArticle number (IDH):\u003c\/strong\u003e 1797914\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemistry:\u003c\/strong\u003e silane-curing FlexTec polymer; isocyanate free and solvent free; moisture curing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e seals and bonds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAppearance:\u003c\/strong\u003e transparent\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInitial grab:\u003c\/strong\u003e 50 kg\/m², instant bonding\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinal strength:\u003c\/strong\u003e approx. 3.0 N\/mm² (wood to wood lap shear, DIN EN 205)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpen time:\u003c\/strong\u003e approx. 15 minutes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCure rate:\u003c\/strong\u003e approx. 2 mm per 24 hours at 23 °C and 50% relative humidity\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eService temperature:\u003c\/strong\u003e −30 °C to +80 °C, short-term to 100 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater resistance:\u003c\/strong\u003e resistant; can be applied under water and on wet surfaces. Permanent immersion is not advised\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGap bridging:\u003c\/strong\u003e up to 20 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e approx. 300 g\/m² applied full-surface, or approx. 11 m as a 6 mm bead\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinishing:\u003c\/strong\u003e over-paintable and sandable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOther published properties:\u003c\/strong\u003e weather and ageing resistant; low shrinkage; neutral odour\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShelf life:\u003c\/strong\u003e 15 months in the original packaging, cool and dry, away from frost, flame and sunlight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot for:\u003c\/strong\u003e polyethylene, polypropylene, PTFE, acrylic glass, plasticised PVC, copper or brass\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Henkel","offers":[{"title":"Carton of 12 x 380 ml","offer_id":43214016086087,"sku":"HKL-PL200","price":17160.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/pattex-pl-200-polymer-construction-adhesive-sealant.jpg?v=1789475442"},{"product_id":"pattex-pur-wood-glue-d4","title":"Pattex PUR Wood Glue, D4 Water Resistant","description":"\u003cp\u003ePattex PUR, Henkel article 2586596, is a one-component polyurethane wood adhesive that cures\non moisture, and it is the water-resistance answer in this range: Henkel classifies it \u003cstrong\u003eD4 to\nDIN EN 204\u003c\/strong\u003e, the highest durability class. It also bonds materials a PVA wood glue\ncannot — wood to metal, to concrete, to polystyrene foam and to other non-porous substrates\n— and Henkel publishes a service range of −30 °C to +100 °C.\u003c\/p\u003e\n\u003cp\u003eThis is the glue for exterior joinery, windows and doors, laminating, and anything that will get wet\nor see weather. It will take slightly damp surfaces, which a white wood glue will not. It is also fast:\nopen time is two minutes at most, so cut, fit and dry-assemble everything before you spread any glue,\nand have the cramps set and ready. Fifteen to twenty minutes under cramps is Henkel's minimum, varying\nwith the conditions on the day.\u003c\/p\u003e\n\u003cp\u003eSold by the full carton. This is a diisocyanate product — it contains\ndiphenylmethane-4,4′-diisocyanate, and Henkel's own hazard wording is set out below. Read it,\nventilate, and wear gloves: cured polyurethane comes off skin mechanically, not with water.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003eHenkel, Pattex PUR Wood Glue technical data sheet.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eArticle number (IDH):\u003c\/strong\u003e 2586596\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemistry:\u003c\/strong\u003e one-component polyurethane prepolymer, moisture curing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater resistance:\u003c\/strong\u003e D4 to DIN EN 204 — the highest class. Can be used on slightly humid surfaces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpen time:\u003c\/strong\u003e 2 minutes maximum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClamping time:\u003c\/strong\u003e at least 15 to 20 minutes, varying with ambient conditions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTack-free time:\u003c\/strong\u003e 5 to 15 minutes at 23 °C and 50% relative humidity\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eService temperature:\u003c\/strong\u003e −30 °C to +100 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e approx. 150 ml\/m²\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eViscosity:\u003c\/strong\u003e low; Henkel describes it as easy to apply and fast curing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBonds:\u003c\/strong\u003e wood to wood, and wood to metal, concrete, polystyrene foam and other porous and non-porous materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHazards — Henkel's published wording\u003c\/h3\u003e\n\u003cp\u003e“Harmful. Contains Diphenylmethane-4,4′-Diisocyanate. Harmful by inhalation. Irritating to\neyes, respiratory system and skin.” Use with ventilation and protective equipment, and keep away\nfrom children. Ask us for the safety data sheet before you first use it on site.\u003c\/p\u003e\n\u003cp\u003eHenkel also publishes, for reactive polyurethane products containing more than 0.1% diisocyanate, that\nsince August 2023 a user must be able to demonstrate personal training in safe handling on request, and\npoints to the FEICA training tool at www.feica.eu\/PUinfo. If your crew works with polyurethane adhesives\nor foams regularly, that training is worth having on file.\u003c\/p\u003e","brand":"Henkel","offers":[{"title":"Carton of 48 x 150 ml","offer_id":43214016151623,"sku":"HKL-PUR-150","price":20160.0,"currency_code":"KES","in_stock":true},{"title":"Carton of 12 x 500 ml","offer_id":43214016184391,"sku":"HKL-PUR-500","price":13440.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/pattex-pur-wood-glue-d4.jpg?v=1789475471"},{"product_id":"sista-pu-foam-universal-750ml","title":"Sista PU Foam Universal 750 ml, Straw Type","description":"\u003cp\u003eSista is Henkel's foam and sealant brand, and this is the 750 ml Universal can sold here. It\nis the \u003cstrong\u003estraw type\u003c\/strong\u003e, not a gun foam: the pack prints “STRAW · PIPETTE”\nbeneath “PU FOAM” and the applicator straw is clipped to the side of the can, so no foam gun\nis needed. Henkel's own safety data sheet for the Africa market identifies it as Sista PU Foam TR and\ndescribes it as a one-component foam with propellant gas — a polyurethane that cures on the\nmoisture in the air and in the substrate.\u003c\/p\u003e\n\u003cp\u003eHenkel publishes no application list for this particular can, so take the following as what an\nexpanding gap-filling foam is used for on site rather than as a Henkel specification: closing and\ninsulating the gaps a trowel cannot reach. As with any expanding polyurethane foam, mineral surfaces are\ndampened before foaming, anything that could be pushed out of square is braced until the foam has set,\nand the bead is run in at about a third of the gap because it grows. Cured foam has to be covered\n— painted, plastered or trimmed over — because Henkel publishes that requirement for its PU\nfoams: unprotected foam breaks down in sunlight.\u003c\/p\u003e\n\u003cp\u003eSold by the full carton of 12. Henkel publishes no technical data sheet for this exact can, only its\nsafety data sheet, so we quote no yield, cutting time, cure time or fire class for it. The gold badge on\nthe pack carries a figure we cannot read reliably, and we are not going to guess at it. If you need those\nnumbers for a specification or a tender, ask us and we will request the datasheet from Henkel. This is a\ndiisocyanate foam and an extremely flammable aerosol; the hazard information below is Henkel's own and it\nis not boilerplate.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003eHenkel safety data sheet for Sista PU Foam TR, SDS No. 528657 V002.0, Henkel South Africa. Performance\nfigures are not published for this product.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e one-component moisture-curing polyurethane foam, hand-held straw \/ pipette application\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntended use, as Henkel states it:\u003c\/strong\u003e foam, one-component with propellant gas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIsocyanate content:\u003c\/strong\u003e 10–30% 4,4′-methylenediphenyl diisocyanate (MDI)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePropellants:\u003c\/strong\u003e dimethyl ether, isobutane, propane and n-butane\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAppearance:\u003c\/strong\u003e pressurised can; foam; brownish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDensity of the product as supplied:\u003c\/strong\u003e 1.2 g\/cm³ at 23 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlash point:\u003c\/strong\u003e −20 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYield, tack-free time, cutting time, full cure time, temperature range, fire class and approvals:\u003c\/strong\u003e not published by Henkel for this product\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHazards — Henkel's published classification\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eH222 Extremely flammable aerosol\u003c\/li\u003e\n\u003cli\u003eH229 Pressurised container: may burst if heated\u003c\/li\u003e\n\u003cli\u003eH315 Causes skin irritation\u003c\/li\u003e\n\u003cli\u003eH317 May cause an allergic skin reaction\u003c\/li\u003e\n\u003cli\u003eH319 Causes serious eye irritation\u003c\/li\u003e\n\u003cli\u003eH334 May cause allergy or asthma symptoms or breathing difficulties if inhaled\u003c\/li\u003e\n\u003cli\u003eH335 May cause respiratory irritation\u003c\/li\u003e\n\u003cli\u003eH351 Suspected of causing cancer\u003c\/li\u003e\n\u003cli\u003eH362 May cause harm to breast-fed children\u003c\/li\u003e\n\u003cli\u003eH373 May cause damage to organs through prolonged or repeated exposure\u003c\/li\u003e\n\u003cli\u003eH413 May cause long lasting harmful effects to aquatic life\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHandling, as Henkel publishes it for its PU foams: store and transport the can upright, wrapped, and\nnever in the passenger compartment of a vehicle. Remove fresh foam from skin at once and wipe residues\nwith vegetable oil; fresh foam on other surfaces comes off with PU cleaner; cured foam can only be\nremoved mechanically. Henkel also publishes that since August 2023 users of reactive polyurethane\nproducts containing more than 0.1% MDI must be able to demonstrate personal training in safe handling on\nrequest, and points to the FEICA training tool at www.feica.eu\/PUinfo.\u003c\/p\u003e","brand":"Henkel","offers":[{"title":"Carton of 12 x 750 ml","offer_id":43214016282695,"sku":"HKL-SISTA-750","price":14880.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/sista-pu-foam-universal-750ml.jpg?v=1789475502"},{"product_id":"conta-contact-adhesive-universal","title":"Conta Contact Adhesive Universal","description":"\u003cp\u003eConta is the contact adhesive Henkel makes for this market, and the pack says so: \u003cstrong\u003econta\n— CONTACT ADHESIVE — Universal\u003c\/strong\u003e, with “QUALITY FROM Henkel” printed on the\ntin. The two things it leads on are worth reading. It is \u003cstrong\u003etoluene free\u003c\/strong\u003e, and its\n\u003cstrong\u003en-hexane content is under 2%\u003c\/strong\u003e — the solvents that make cheap contact cement\nunpleasant and, in a closed room, dangerous. That matters more than any figure to the fundi who is going\nto use a whole litre of it laminating a kitchen with the windows shut.\u003c\/p\u003e\n\u003cp\u003eContact adhesive is the glue for laminate and formica onto board, veneer, plywood, MDF and blockboard,\nleather onto seat frames, rubber and cork, and shoe repair; the tube carton lists wood (\u003cem\u003embao\u003c\/em\u003e) and\nleather (\u003cem\u003engozi\u003c\/em\u003e) among its substrates. Both faces are coated, left to become tacky, then brought\ntogether and pressed. There is no second chance: the pack warns you to align the two pieces carefully,\nbecause moving them afterwards costs you the bond strength. Open time is 10 to 15 minutes, and the tin's\nicons give a service range of −5 °C to +80 °C and a flexible bond. Carpenters,\nkitchen fitters, upholsterers, cobblers and hardware retailers buy it by the carton.\u003c\/p\u003e\n\u003cp\u003eSold by the full carton in six sizes: 50 ml and 100 ml tubes for small work, and 250 g,\n500 g, 1 litre and 4 litre tins. Being straight about what is not here: Henkel publishes no\ntechnical data sheet and no safety data sheet for Conta that we can find, so everything below is read off\nthe pack, and there is no published coverage figure, cure time or chemistry. Ask us if you need the\ndatasheet for a specification and we will request it from Henkel Kenya.\u003c\/p\u003e\n\u003ch3\u003ePrinted on the pack\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct name:\u003c\/strong\u003e conta Contact Adhesive Universal — “Quality from Henkel”\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolvents:\u003c\/strong\u003e toluene free; n-hexane content under 2%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpen time:\u003c\/strong\u003e 10 to 15 minutes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eService temperature:\u003c\/strong\u003e −5 °C to +80 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBond:\u003c\/strong\u003e high heat resistance; excellent bond strength; flexible bond\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStorage:\u003c\/strong\u003e store in a cool, dry place\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmall packs:\u003c\/strong\u003e the 50 ml and 100 ml are tubes in a printed carton; the tube reads “Conta® CONTACT Adhesive” and the carton “conta CONTACT” with “Gundi” on the red panel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage, cure time and chemistry:\u003c\/strong\u003e not published by Henkel for this product\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere not to use it\u003c\/h3\u003e\n\u003cp\u003eThe pack states: \u003cstrong\u003enot suitable for bonding plastics such as polyethylene, polypropylene,\nTeflon, flexible PVC and polystyrene.\u003c\/strong\u003e Flexible PVC rules out the vinyl-coated upholstery cloth\nsold locally as rexine, and polystyrene rules out foam insulation and most foam trim, so check what you\nare actually gluing before you start.\u003c\/p\u003e\n\u003ch3\u003eHazards\u003c\/h3\u003e\n\u003cp\u003eThe carton carries an orange \u003cstrong\u003eFLAMMABLE\u003c\/strong\u003e pictogram and a printed warning panel. Treat it\nas a flammable solvent adhesive: work in a ventilated space, keep it away from flame and sparks, and keep\nit off skin and eyes. Henkel publishes no safety data sheet for Conta that we can find, so we quote no\nclassification beyond what the carton declares — read the warning panel on the pack itself before\nfirst use, and ask us for the data sheet if you need it on file.\u003c\/p\u003e","brand":"Henkel","offers":[{"title":"Carton of 36 x 50 ml","offer_id":43214016544839,"sku":"HKL-CONTA-50","price":4680.0,"currency_code":"KES","in_stock":true},{"title":"Carton of 24 x 100 ml","offer_id":43214016577607,"sku":"HKL-CONTA-100","price":6240.0,"currency_code":"KES","in_stock":true},{"title":"Carton of 24 x 250 g","offer_id":43214016610375,"sku":"HKL-CONTA-250","price":9840.0,"currency_code":"KES","in_stock":true},{"title":"Carton of 24 x 500 g","offer_id":43214016643143,"sku":"HKL-CONTA-500","price":16320.0,"currency_code":"KES","in_stock":true},{"title":"Carton of 12 x 1 litre","offer_id":43214016675911,"sku":"HKL-CONTA-1L","price":16680.0,"currency_code":"KES","in_stock":true},{"title":"Carton of 4 x 4 litre","offer_id":43214016708679,"sku":"HKL-CONTA-4L","price":18720.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/conta-contact-adhesive-universal.jpg?v=1789475592"},{"product_id":"pattex-sl212-general-purpose-silicone","title":"Pattex SL212 General Purpose Silicone","description":"\u003cp\u003eThis is the cartridge the trade here buys as “Pattex Smart”, and the pack settles what\nit actually is: \u003cstrong\u003ePattex SL212 — GENERAL PURPOSE — ACETIC SILICONE\u003c\/strong\u003e,\n280 mL, “Quality for Professionals”, made in Türkiye and imported by Henkel Kenya.\nAcetic means acetoxy cure — it is the fast-curing, hard-working general-purpose silicone, not a\nneutral-cure one, and that is the single fact that decides whether it suits your job.\u003c\/p\u003e\n\u003cp\u003eHenkel publishes it for sealing joints in sanitary and construction work, on tiles, ceramics, glass,\nbrick, lacquered and anodised aluminium, painted metals and wood. Glazing, window and door perimeters,\nkitchen and bathroom joints, and general non-porous joint sealing. It is mildew resistant and waterproof,\nand Henkel rates it from −30 °C to +120 °C. The pack's own icons read\nmultimaterials, water resistant and UV resistant. Skin forms in about 15 minutes, so tool the bead\npromptly.\u003c\/p\u003e\n\u003cp\u003eSold by the carton of 24 in three colours. Before you order, two limits that matter: an acetoxy silicone\nreleases acetic acid as it cures, so Henkel says \u003cstrong\u003edo not use it against lead, copper, zinc or\niron\u003c\/strong\u003e, and \u003cstrong\u003enot on mirrors or aquaria\u003c\/strong\u003e — use a neutral-cure sealant for those.\nIt is also \u003cstrong\u003enot paintable\u003c\/strong\u003e and not for permanent water immersion or drinking-water contact.\nThe pack tells you to use it only outdoors or in a well-ventilated area, and to keep it off eyes, skin and\nclothing. The cartridge photographs are Henkel's own front-of-pack shots, one for each colour, and the last\npicture is the back of a cartridge so you can read the instructions and the warning before you buy.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003eHenkel, Pattex SL212 General Purpose technical data sheet, and the pack.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eArticle numbers (IDH):\u003c\/strong\u003e white 2637448 · transparent 2637449 · black 2500095\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemistry:\u003c\/strong\u003e acetoxy silicone, acetic-acid-releasing cure. Not a neutral cure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack:\u003c\/strong\u003e 280 ml cartridge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSkin formation:\u003c\/strong\u003e 15 minutes at 23 °C, 50% relative humidity\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCure rate:\u003c\/strong\u003e 2 mm per 24 hours (23 °C, 50% r.h., 20 × 10 mm bead)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElongation at break:\u003c\/strong\u003e 110%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModulus at 100% elongation:\u003c\/strong\u003e 0.35 N\/mm²\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardness:\u003c\/strong\u003e Shore A 20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eService temperature:\u003c\/strong\u003e −30 °C to +120 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater resistance:\u003c\/strong\u003e waterproof; resistant to water, ozone and ultraviolet radiation. Not for permanent immersion and not for drinking-water contact\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMould:\u003c\/strong\u003e mildew resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOver-paintable:\u003c\/strong\u003e no\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStorage:\u003c\/strong\u003e the pack says keep dry between +5 °C and +25 °C; shelf life 18 months from manufacture\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMovement accommodation, coverage:\u003c\/strong\u003e not published by Henkel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere not to use it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAgainst corrosive metal surfaces — lead, copper, zinc, iron — because the cure releases acetic acid.\u003c\/li\u003e\n\u003cli\u003eMirrors and aquaria.\u003c\/li\u003e\n\u003cli\u003eJoints under permanent water immersion, and anything in contact with drinking water.\u003c\/li\u003e\n\u003cli\u003eBituminous substrates, natural rubber, chloroprene and EPDM.\u003c\/li\u003e\n\u003cli\u003eThe pack's own list begins “not suitable for PE, PP, PTFE, PMMA…” and continues around the cartridge, so read it on the pack before you commit. PMMA is acrylic, which rules out acrylic glazing and most shower screens.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe pack carries a warning that it contains an isothiazolinone biocide, which may produce an allergic\nreaction, and instructs you to use it only outdoors or in a well-ventilated area and to keep it off eyes,\nskin and clothing. Ask us for the safety data sheet before first use on site.\u003c\/p\u003e","brand":"Henkel","offers":[{"title":"Black","offer_id":43214017232967,"sku":"HKL-SL212-BLK","price":12000.0,"currency_code":"KES","in_stock":true},{"title":"White","offer_id":43214017265735,"sku":"HKL-SL212-WHT","price":12000.0,"currency_code":"KES","in_stock":true},{"title":"Transparent","offer_id":43214017298503,"sku":"HKL-SL212-TRA","price":12000.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/pattex-sl212-general-purpose-silicone.jpg?v=1789475636"}],"url":"https:\/\/ahihqtraders.com\/collections\/henkel.oembed","provider":"AHIHQ Traders","version":"1.0","type":"link"}