{"title":"Power Tool Accessories","description":"\u003cp\u003eAccessories and consumables used with power tools.\u003c\/p\u003e","products":[{"product_id":"emtop-staples-10mm-1000-pack-for-staple-gun-enal0210","title":"EMTOP Staples 10mm 1000 Pack for Staple Gun ENAL0210","description":"\u003cp\u003eShort staples for light fixing, supplied 1000 to a box. Upholsterers, display and exhibition fitters, framers and signwriters use this size for fabric, mesh, thin board, insect screen, plastic sheet and paper-backed materials pinned to timber.\u003c\/p\u003e\u003cp\u003eSize is 10mm with a length of 11.3mm and a wire width of 1.2mm. At that length the staple holds sheet material firmly against a solid ground without punching through the far side of thin battens, which is exactly what is wanted for trim and covering work.\u003c\/p\u003e\u003cp\u003eThe pack is collated for the ESGU1001 and ESGU3001 staple guns. Using the matched staple keeps the magazine feeding cleanly and avoids the jams and misfires that come from mixed or slightly oversized fasteners, which cost more time than the staples themselves are worth.\u003c\/p\u003e\u003cp\u003eA thousand staples is enough for a substantial run of covering work, and the box is small enough to keep in a tool bag with the gun so the two do not become separated.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eQuantity: 1000 staples\u003c\/li\u003e\n\u003cli\u003eSize: 10mm\u003c\/li\u003e\n\u003cli\u003eLength: 11.3mm\u003c\/li\u003e\n\u003cli\u003eWidth: 1.2mm\u003c\/li\u003e\n\u003cli\u003eSuitable for ESGU1001 and ESGU3001\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180923617351,"sku":"ENAL0210","price":130.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/ENAL0210_000967.jpg?v=1788979111"},{"product_id":"emtop-brad-nails-10mm-5000-pack-for-staple-gun-enal0310","title":"EMTOP Brad Nails 10mm 5000 Pack for Staple Gun ENAL0310","description":"\u003cp\u003eConsumables run out faster than tools wear out, and this box of 5000 brad nails keeps a staple gun working through a run of light fixing. Upholsterers, picture framers, cabinet makers and display fitters use short brads of this kind for fabric trim, backing boards, thin beading and holding parts while adhesive sets.\u003c\/p\u003e\u003cp\u003eEach nail is 10mm long with a 1.2mm width and a 2.0mm head, small enough to sink below the surface and leave a mark that fills easily. The nails are collated for the ESGU1001 staple gun, so they feed cleanly and avoid the jamming that mismatched fasteners cause.\u003c\/p\u003e\u003cp\u003eBecause they are driven rather than hammered, the workpiece is not knocked out of position while the fixing goes in, which is what makes them suited to delicate assemblies and thin sections. Buying a full 5000-piece box is usually more economical per nail than replacing small packs part way through a job, and a spare box on the shelf keeps a workshop running.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eQuantity: 5000 pieces per box\u003c\/li\u003e\n\u003cli\u003eLength: 10mm\u003c\/li\u003e\n\u003cli\u003eHead: 2.0mm\u003c\/li\u003e\n\u003cli\u003eWidth: 1.2mm\u003c\/li\u003e\n\u003cli\u003eSuitable for ESGU1001\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180924764231,"sku":"ENAL0310","price":350.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/ENAL0310_000968.jpg?v=1788979128"},{"product_id":"emtop-brad-nails-40mm-for-air-nailers-enal18401","title":"EMTOP Brad Nails 40mm for Air Nailers ENAL18401","description":"\u003cp\u003eBrad nails hold trim, beading and light joinery together without splitting the timber or bruising the face of the work. This EMTOP pack is made up of \u003cstrong\u003e40mm\u003c\/strong\u003e brads, a length that suits skirting, architrave, door stops, glazing beads, picture frames and thin panel work where a longer fastener would punch straight through.\u003c\/p\u003e\u003cp\u003eThe slim gauge and small head are the point of a brad. The nail sinks below the surface, leaves a hole small enough to vanish under filler and paint, and holds the piece steady while the adhesive cures. Loaded into a brad nailer, a strip lets a fitter place fastener after fastener one-handed while the other hand keeps the moulding true.\u003c\/p\u003e\u003cp\u003eCarpenters, shopfitters and furniture workshops tend to keep a box on the bench for everyday second-fix work.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNail length: 40mm\u003c\/li\u003e\n\u003cli\u003eModel: ENAL18401\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180925190215,"sku":"ENAL18401","price":780.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/ENAL18401_004551.jpg?v=1788979133"},{"product_id":"emtop-staples-12mm-6-3mm-crown-1000-pack-enal0412","title":"EMTOP Staples 12mm 6.3mm Crown 1000 Pack ENAL0412","description":"\u003cp\u003eA wider crown holds soft and loose materials better, and at 6.3mm across these staples grip fabric, netting, membrane and thin sheet more securely than a narrow crown of the same leg length. Upholstery, seat covers, screen doors, insulation and temporary sheeting are typical work.\u003c\/p\u003e\u003cp\u003eLeg length is 12mm on 1.2mm wire, which suits fixing into softwood battens and plywood grounds where the fastener needs to bite without breaking through. The box holds 1000 staples, a practical quantity for a single job or a stocked drawer.\u003c\/p\u003e\u003cp\u003eThese are collated for the ESGU1001 staple gun. Matching the staple to the tool is what keeps the gun feeding reliably, so it is worth ordering the correct pack rather than a generic equivalent that may be a fraction out on wire size.\u003c\/p\u003e\u003cp\u003eKeeping both a narrow and a wide crown staple to hand covers most light fixing work, since the choice depends far more on what is being held than on what it is being held to.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eQuantity: 1000 pieces per box\u003c\/li\u003e\n\u003cli\u003eLength: 12mm\u003c\/li\u003e\n\u003cli\u003eStaple crown: 6.3mm\u003c\/li\u003e\n\u003cli\u003eWidth: 1.2mm\u003c\/li\u003e\n\u003cli\u003eSuitable for ESGU1001\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180925583431,"sku":"ENAL0412","price":150.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/ENAL0412_000969.jpg?v=1788979144"},{"product_id":"emtop-saw-chain-24-inch-3-8-pitch-84-links-ecsl5241","title":"EMTOP Saw Chain 24 Inch 3\/8\" Pitch 84 Links ECSL5241","description":"\u003cp\u003eChains wear out long before saws do, and a dull or stretched chain makes even a strong machine cut badly. This 24 inch replacement chain restores the original cutting performance on the EGCS24621 and EGCS26621 petrol chainsaws.\u003c\/p\u003e\u003cp\u003eThree figures decide whether a chain fits, and all three are fixed here: the pitch is 3\/8\", the gauge is 0.063\" and there are 84 drive links. Matching the chain to the bar on all three counts is what stops it jumping the rails or running slack, so it is worth quoting these numbers when ordering rather than relying on bar length alone.\u003c\/p\u003e\u003cp\u003eAnyone felling or cross-cutting regularly should keep a spare chain and swap it while the worn one is being sharpened, so that a day's work is not held up by a single blunt chain in the middle of a stand of timber.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLength: 24\"\u003c\/li\u003e\n\u003cli\u003eChain pitch: 3\/8\"\u003c\/li\u003e\n\u003cli\u003eChain gauge: 0.063\"\u003c\/li\u003e\n\u003cli\u003eDrive links: 84\u003c\/li\u003e\n\u003cli\u003eSuitable for EGCS24621 and EGCS26621 chain saws\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180926763079,"sku":"ECSL5241","price":3190.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/ECSL5241_004552.jpg?v=1788979157"},{"product_id":"emtop-brad-nails-18-gauge-25mm-and-50mm-5000-pack","title":"EMTOP Brad Nails 18 Gauge 25mm and 50mm 5000 Pack","description":"\u003cp\u003eCollated brad nails in 18 gauge, supplied in 25mm and 50mm lengths so that the same nailer can be used for light beading and for heavier trim without changing tools. Joiners, shopfitters and furniture makers work through these by the box on skirting, architrave, glazing beads, panelling and cabinet assembly.\u003c\/p\u003e\u003cp\u003eBoth lengths use 1.25 x 1.0mm wire, the standard 18 gauge section, which leaves a hole small enough to fill and paint over. The shorter 25mm nail is the choice for beads, small mouldings and thin sheet fixed to a solid ground, while the 50mm nail holds architrave and heavier sections where more grip is needed in the timber behind.\u003c\/p\u003e\u003cp\u003eEach box holds 5000 nails. Both sizes fit the ECBN504001 and ECBN155001 pneumatic nailers as well as the ELBNLI2028, ELBNLI2001 and ELBNLI2036 cordless models, with the 25mm length also matching ECBN103001.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e25mm option: brad length 25mm, suits ECBN504001, ECBN155001, ELBNLI2028, ELBNLI2001, ELBNLI2036 and ECBN103001\u003c\/li\u003e\n\u003cli\u003e50mm option: brad length 50mm, suits ECBN504001, ECBN155001, ELBNLI2028, ELBNLI2001 and ELBNLI2036\u003c\/li\u003e\n\u003cli\u003eGauge: 18 (1.25 x 1.0mm), both options\u003c\/li\u003e\n\u003cli\u003eQuantity: 5000 pieces per box, both options\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"25mm","offer_id":43180927123527,"sku":"ENAL18251","price":650.0,"currency_code":"KES","in_stock":true},{"title":"50mm","offer_id":43180927156295,"sku":"ENAL18501","price":1130.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/ENAL18251_000970.jpg?v=1788979165"},{"product_id":"emtop-crown-staples-25mm-18-gauge-2500-pack-enal18252","title":"EMTOP Crown Staples 25mm 18 Gauge 2500 Pack ENAL18252","description":"\u003cp\u003eNarrow crown staples hold better than a single brad where thin material has to be pinned to a frame, because the crown spreads the load across two legs. This box of 2500 covers cabinet backs, drawer bottoms, sheathing, fabric and mesh fixed to timber.\u003c\/p\u003e\u003cp\u003eLeg length is 25mm and the crown measures 5.7mm, in 18 gauge with 1.25 x 1.0mm wire. That combination sinks flush into softwood and plywood without splitting thin edges, and leaves a fixing that resists pulling through in a way a plain pin does not.\u003c\/p\u003e\u003cp\u003eThe staples are collated for the ECBN504001 combo nailer, which fires both brads and staples, so a workshop running that tool can keep a box of each on the shelf and switch between them as the job requires. Consumables of this kind are worth ordering ahead of the work rather than during it.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStaple size: 25mm\u003c\/li\u003e\n\u003cli\u003eStaple crown: 5.7mm\u003c\/li\u003e\n\u003cli\u003eGauge: 18 (1.25 x 1.0mm)\u003c\/li\u003e\n\u003cli\u003eQuantity: 2500 pieces per box\u003c\/li\u003e\n\u003cli\u003eSuitable for ECBN504001\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180927909959,"sku":"ENAL18252","price":650.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/ENAL18252_000971.jpg?v=1788979182"},{"product_id":"emtop-crown-staples-40mm-18-gauge-2500-pack-enal18402","title":"EMTOP Crown Staples 40mm 18 Gauge 2500 Pack ENAL18402","description":"\u003cp\u003eLonger legs mean more grip, and at 40mm these narrow crown staples are the choice when thin material has to be held to a deeper timber ground. Furniture makers, crate and pallet builders, roofers fixing membrane and joiners assembling carcasses all use staples at this length.\u003c\/p\u003e\u003cp\u003eThe crown is 5.7mm across in 18 gauge, using 1.25 x 1.0mm wire, so the fixing pulls tight without cutting through plywood, hardboard, fabric or membrane. Compared with the 25mm staple, the extra leg length matters where the top layer may lift or where a temporary fixing has to hold under handling.\u003c\/p\u003e\u003cp\u003eSupplied 2500 to a box and collated for the ECBN504001 combo nailer, this is a working consumable rather than an occasional purchase, and keeping a box in reserve avoids stopping halfway through a job to go and find more.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStaple size: 40mm\u003c\/li\u003e\n\u003cli\u003eStaple crown: 5.7mm\u003c\/li\u003e\n\u003cli\u003eGauge: 18 (1.25 x 1.0mm)\u003c\/li\u003e\n\u003cli\u003eQuantity: 2500 pieces per box\u003c\/li\u003e\n\u003cli\u003eSuitable for ECBN504001\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180928827463,"sku":"ENAL18402","price":1000.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/ENAL18402_000972.jpg?v=1788979198"},{"product_id":"emtop-dry-diamond-disc-for-angle-grinder-eddc011152","title":"EMTOP Dry Diamond Disc for Angle Grinder EDDC011152","description":"\u003cp\u003eDiamond discs cut hard materials by abrasion rather than with teeth, which is why they outlast an abrasive wheel on masonry work. A dry cutting disc is made to run without a water feed, on a standard angle grinder.\u003c\/p\u003e\u003cp\u003eTypical work is cutting concrete, block, brick, kerb, paving, roof tile and screed for chases, openings and trimming to a line. Let the disc reach full speed before it touches the work, ease it through the cut instead of forcing it, and lift it clear now and then to cool.\u003c\/p\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180929810503,"sku":"EDDC011152","price":310.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EDDC011152_004555.jpg?v=1788979215"},{"product_id":"emtop-jigsaw-blades-for-wood-74mm-8-tpi-5pcs-ejsbt111c","title":"EMTOP Jigsaw Blades for Wood 74mm 8 TPI 5pcs EJSBT111C","description":"\u003cp\u003eCarpenters and shopfitters cutting curves and cut-outs in timber get through jigsaw blades quickly, and a five-piece set keeps the machine working. These EMTOP blades are the basic wood pattern, the general purpose choice for fast, straightforward cutting in board and solid stock.\u003c\/p\u003e\u003cp\u003eEach blade carries 74mm of tooth length at 8 teeth per inch, a coarse pitch that clears chips freely and keeps the cut moving rather than burning. The blades are milled from chrome vanadium steel, and the T-shank profile drops into the quick-change holder found on common jigsaws.\u003c\/p\u003e\u003cp\u003eThey handle worktop cut-outs for sinks and hobs, door and window openings in board, roof and ceiling boarding, formwork, furniture making, and rough sizing of softwood and plywood on site. Supplied five per blister card, they suit joiners, fundis, maintenance teams and hardware shops selling jigsaw consumables.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e basic blade for wood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of tooth:\u003c\/strong\u003e 74mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePitch:\u003c\/strong\u003e 8 TPI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e chrome vanadium, milled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack quantity:\u003c\/strong\u003e 5 pieces per set\u003c\/li\u003e\n\u003cli\u003eSupplied on a blister card\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180930564167,"sku":"EJSBT111C","price":210.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EJSBT111C_000905.jpg?v=1788979228"},{"product_id":"emtop-jigsaw-blade-for-timber-and-board-esbt111c","title":"EMTOP Jigsaw Blade for Timber and Board ESBT111C","description":"\u003cp\u003eCutting timber with a jigsaw calls for a coarser, more aggressive tooth than metal work, and this blade is set up for exactly that: quick progress through softwood, plywood, chipboard and blockboard without bogging the machine down.\u003c\/p\u003e\u003cp\u003eCarpenters and shopfitters use blades of this pattern for cutting out sink and hob openings, notching around pipes, trimming panels and following curves that a circular saw cannot reach. The T-shank drops into the tool-free chuck on most jigsaws, so swapping between wood and metal blades takes seconds on site.\u003c\/p\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180930596935,"sku":"ESBT111C","price":180.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/ESBT111C_004556.jpg?v=1788979229"},{"product_id":"emtop-jigsaw-blade-for-metal-cutting-ejsbt118b","title":"EMTOP Jigsaw Blade for Metal Cutting EJSBT118B","description":"\u003cp\u003eThis jigsaw blade is toothed for metal rather than timber, with the finer, closer pitch that metal cutting needs so the teeth stay in contact with the workpiece instead of snatching at it. The T-shank fits the quick-change chuck used on most modern jigsaws.\u003c\/p\u003e\u003cp\u003eIt is the blade to reach for when cutting sheet, thin plate, tube, angle or profile on fabrication, sheet metal, ducting and general repair work. Keep the shoe flat, let the machine set the pace and use a cutting lubricant where the material allows it.\u003c\/p\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180932268103,"sku":"EJSBT118B","price":310.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EJSBT118B_004557.jpg?v=1788979245"},{"product_id":"emtop-staples-enal0108-for-staple-guns-and-tackers","title":"EMTOP Staples ENAL0108 for Staple Guns and Tackers","description":"\u003cp\u003eStaples are the quickest way to fix thin, flexible material to a timber ground. Driven by a tacker or a pneumatic stapler, the two legs pull the crown down tight against the surface, which spreads the hold across fabric, mesh or sheeting instead of concentrating it on a single nail head that would tear straight through.\u003c\/p\u003e\u003cp\u003eThese EMTOP staples are supplied as a refill pack for staple guns and tackers. Upholsterers, ceiling and partition fitters, sign makers and packing crews use them for stretching fabric over frames, holding insulation and building paper in place, fixing chicken wire and netting, tacking underlay and closing light crates and cartons.\u003c\/p\u003e\u003cp\u003eMatch the staple to the gun before buying: a stapler will only feed the crown width and leg length it was designed for.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eModel: ENAL0108\u003c\/li\u003e\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180970246215,"sku":"ENAL0108","price":130.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/ENAL0108_005838.jpg?v=1788979862"},{"product_id":"emtop-drill-accessory-set-eamd41001-drilling-and-driving","title":"EMTOP Drill Accessory Set EAMD41001 Drilling and Driving","description":"\u003cp\u003eA drill is only as useful as the accessories that go into the chuck. Mixed accessory sets bring drilling and driving items together in one case, so an electrician or joiner arriving on site can bore, countersink and drive without carrying three separate boxes.\u003c\/p\u003e\u003cp\u003eThe EMTOP EAMD41001 is supplied as a set for use with cordless and corded drills. Because the manufacturer did not publish a specification sheet for this item, the exact contents, sizes and case type are not confirmed here. Check the pack listing before ordering if a specific bit size or shank type is required for the job.\u003c\/p\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180970410055,"sku":"EAMD41001","price":3110.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EAMD41001_000768.jpg?v=1788979875"},{"product_id":"emtop-hex-shank-chisel-for-demolition-breaker-echs0304375","title":"EMTOP Hex Shank Chisel for Demolition Breaker ECHS0304375","description":"\u003cp\u003eBreakers and demolition hammers take chisels with a hexagonal shank, which locks into the tool and transfers the blow without twisting. The chisel is the part that does the cutting, so the shape chosen decides how the material comes apart.\u003c\/p\u003e\u003cp\u003ePointed chisels concentrate the blow to start a hole in concrete, while flat and spade shapes lever material away, lift tiles and screed and trim back edges. Keep the shank clean and greased before fitting, work from a free edge, and replace a chisel once its tip has mushroomed.\u003c\/p\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180983156807,"sku":"ECHS0304375","price":9860.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/ECHS0304375_004512.jpg?v=1788980108"},{"product_id":"emtop-brush-cutter-blade-255mm-three-tooth-ebcb101","title":"EMTOP Brush Cutter Blade 255mm Three Tooth EBCB101","description":"\u003cp\u003eGrounds crews and landscapers clearing thick grass, weeds and light scrub need a blade that keeps cutting where nylon line gives up. This EMTOP brush cutter blade is a 255mm three-tooth disc for petrol grass trimmers, giving a fast, aggressive cut through stems that would otherwise wrap and stall a spool head.\u003c\/p\u003e\u003cp\u003eThe three-tooth pattern clears material with fewer teeth to blunt, which keeps sharpening simple in the field, and the 255mm (10 inch) diameter matches the standard guard fitted to EMTOP petrol brush cutters. It is supplied in double blister packaging, so shops can hang it on the wall and it reaches the customer with the edges protected.\u003c\/p\u003e\u003cp\u003eUse it on overgrown compounds, roadside verges, fence lines, plot clearing and estate maintenance. It fits the EMTOP EGTC55211, EGTC3122, EGTC6212, EGTC6221, EGTC5212, EGTC5221, EGTC4312 and EGTC4321 petrol grass trimmers, making it a straightforward replacement item for anyone already running those machines.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade diameter:\u003c\/strong\u003e 255mm (10 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade teeth:\u003c\/strong\u003e three\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuitable for:\u003c\/strong\u003e EGTC55211, EGTC3122, EGTC6212, EGTC6221, EGTC5212, EGTC5221, EGTC4312 and EGTC4321 petrol grass trimmers\u003c\/li\u003e\n\u003cli\u003eSupplied in double blister packaging\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180996526151,"sku":"EBCB101","price":690.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EBCB101_000790.jpg?v=1788980295"},{"product_id":"emtop-high-pressure-hose-5m-pvc-quick-connector-ehps0201","title":"EMTOP High Pressure Hose 5m PVC Quick Connector EHPS0201","description":"\u003cp\u003eReach is usually the first limitation people hit with a pressure washer, and a replacement or extension hose solves it. This 5 metre PVC hose fits with a quick connector, so it goes on and off without tools.\u003c\/p\u003e\u003cp\u003eHoses take a hard life on a washer. They are dragged over gravel, driven over on a forecourt and left coiled in the sun, and eventually they weep at a fitting or split. Keeping a spare means a car wash, a workshop or a farm does not lose a day's work waiting for a part.\u003c\/p\u003e\u003cp\u003eIt is matched to the EHPW1401, ULHPW1401, EHPW1801, ULHPW1801 and EHPW2001 machines, so the connector and pressure rating suit those washers directly rather than needing adaptors. Fitting a hose that was never intended for the machine is a common cause of leaks at the coupling, and the correct part removes that guesswork entirely.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLength: 5 metres\u003c\/li\u003e\n\u003cli\u003eMaterial: PVC\u003c\/li\u003e\n\u003cli\u003eQuick connector fitting\u003c\/li\u003e\n\u003cli\u003eMatches EHPW1401, ULHPW1401, EHPW1801, ULHPW1801 and EHPW2001\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180997804103,"sku":"EHPS0201","price":1850.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EHPS0201_004518.jpg?v=1788980313"},{"product_id":"emtop-brush-set-ecbm0301-for-cleaning-and-surface-prep","title":"EMTOP Brush Set ECBM0301 for Cleaning and Surface Prep","description":"\u003cp\u003eSurface preparation decides how well paint, filler or a weld will hold, and brushes are the quickest way to get there. A set covers different shapes for different work: broad faces for open panels, narrow profiles for corners and channels, and smaller heads for cleaning threads, terminals and awkward castings.\u003c\/p\u003e\u003cp\u003eThe EMTOP ECBM0301 is supplied as a set for cleaning and preparation tasks in workshops and on site. No manufacturer specification sheet was available for this item, so the number of brushes, their shapes and the bristle type are not confirmed here. Check the pack detail before ordering if a specific brush profile is needed.\u003c\/p\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180998295623,"sku":"ECBM0301","price":1480.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/ECBM0301_004519.jpg?v=1788980332"},{"product_id":"emtop-flap-disc-for-angle-grinder-sanding-efds1153","title":"EMTOP Flap Disc for Angle Grinder Sanding EFDS1153","description":"\u003cp\u003eA flap disc carries overlapping abrasive flaps around a backing plate, so it grinds and sands in one pass and wears back gradually to expose fresh abrasive instead of glazing over.\u003c\/p\u003e\u003cp\u003eFabricators use flap discs to dress welds, take off mill scale and rust, chamfer plate edges and blend repairs before painting. They leave a smoother surface than a solid grinding wheel, which makes them well suited to finishing work on steel and stainless. Fit the disc to an angle grinder of the matching size and keep it moving across the work.\u003c\/p\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180999671879,"sku":"EFDS1153","price":130.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EFDS1153_004521.jpg?v=1788980367"},{"product_id":"emtop-flap-disc-abrasive-grinding-wheel-efds1154","title":"EMTOP Flap Disc Abrasive Grinding Wheel EFDS1154","description":"\u003cp\u003eWelded joints, cut edges and rusted steel all need cleaning up before they can be painted or handed over, and a flap disc is the usual tool for it. The layered abrasive flaps do the work of a grinding wheel and a sanding pad together.\u003c\/p\u003e\u003cp\u003eHeld at a shallow angle to the surface the disc blends and smooths; held steeper, it takes material off faster. Common jobs include dressing fillet welds, deburring plate, feathering old paint and preparing stainless before finishing. Change the disc once the flaps are worn back to the plate.\u003c\/p\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43181240287303,"sku":"EFDS1154","price":130.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EFDS1154_004522.jpg?v=1788986270"},{"product_id":"emtop-flap-disc-for-steel-deburring-and-blending-efds1155","title":"EMTOP Flap Disc for Steel Deburring and Blending EFDS1155","description":"\u003cp\u003eFlap discs earn their keep in fabrication shops because one disc takes a job from rough weld to a surface ready for paint. The abrasive flaps wear away steadily and keep presenting a fresh edge to the work.\u003c\/p\u003e\u003cp\u003eThey are used on mild steel, stainless and aluminium for grinding down welds, removing scale, easing sharp corners and cleaning up cut ends. Mount the disc squarely on the grinder, run it up to speed clear of the work, and use light sweeping strokes rather than heavy pressure. Eye and face protection are essential.\u003c\/p\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43181241565255,"sku":"EFDS1155","price":130.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EFDS1155_004523.jpg?v=1788986285"},{"product_id":"emtop-diamond-core-bit-102mm-wet-cutting-edhc145102","title":"EMTOP Diamond Core Bit 102mm Wet Cutting EDHC145102","description":"\u003cp\u003eDrilling a clean 102mm hole through reinforced concrete calls for a core bit that will not surrender the moment it meets rebar. This EMTOP wet diamond core bit uses laser welded segments, a construction that bonds the diamond segments to the barrel for demanding core drilling rather than relying on brazing alone.\u003c\/p\u003e\u003cp\u003eIt measures 102mm across the cut with a 450mm barrel length, giving enough reach for thick slabs and walls, and terminates in an M22 x 2.5 adaptor that threads onto standard core drilling motors. Running wet keeps the segments cool and flushes slurry from the kerf, which protects the diamond and holds the bore round from entry to breakthrough.\u003c\/p\u003e\u003cp\u003eTypical work includes service penetrations for plumbing and drainage, ducting and conduit routes, air conditioning pipework, anchor holes and coring for extract fans. It is aimed at concrete cutting contractors, mechanical and electrical installers, and hire fleets that need a bit specified for cutting concrete with rebar.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e wet, laser welded segments\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 102mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 450mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdaptor:\u003c\/strong\u003e M22 x 2.5\u003c\/li\u003e\n\u003cli\u003eSpecified for cutting concrete with rebar\u003c\/li\u003e\n\u003cli\u003eSupplied in a colour box\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43181242581063,"sku":"EDHC145102","price":10190.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EDHC145102_000837.jpg?v=1788986369"},{"product_id":"emtop-lithium-ion-battery-pack-12v-1-5ah-ebpk12150","title":"EMTOP Lithium-Ion Battery Pack 12V 1.5Ah EBPK12150","description":"\u003cp\u003eAnyone running EMTOP's compact 12V tools benefits from a second pack. This 1.5Ah lithium-ion battery fits the S12 platform, so a single spare keeps a driver, a drill or a light in use while the other pack is on charge.\u003c\/p\u003e\u003cp\u003eLithium-ion cells hold their charge on the shelf far better than older chemistries, which matters for a tool that may sit in a van for a fortnight between call-outs. The 1.5Ah rating keeps the pack light and short in the hand, which is the point of a 12V tool in the first place: it stays comfortable in a ceiling void, under a dashboard or inside a cabinet where a larger battery would get in the way.\u003c\/p\u003e\u003cp\u003eBuy it as a spare for tools already owned, as a replacement for a pack that no longer holds charge, or alongside a bare tool bought without a battery. One battery fits all S12 tools, so the pack moves freely across the range.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eVoltage: 12V\u003c\/li\u003e\n\u003cli\u003eLithium-ion battery, 1.5Ah\u003c\/li\u003e\n\u003cli\u003eOne battery fits all S12 tools\u003c\/li\u003e\n\u003cli\u003eSupplied in a colour box\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43181243170887,"sku":"EBPK12150","price":2180.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EBPK12150_000794.jpg?v=1788986392"},{"product_id":"emtop-lithium-ion-battery-pack-20v-2-0ah-ebpk20011","title":"EMTOP Lithium-Ion Battery Pack 20V 2.0Ah EBPK20011","description":"\u003cp\u003eThe 2.0Ah pack is the light one in EMTOP's 20V range, and for many buyers that is exactly right. It fits every tool on the P20S platform, so the same battery moves between a drill, a driver, a sander and a light without a second thought.\u003c\/p\u003e\u003cp\u003eAn LED battery power indicator on the pack shows what charge remains before the tool is carried up a ladder or across a site, which saves a wasted trip. At 2.0Ah the pack keeps weight low and balance forward on the tool, which is welcome on overhead drilling and long sessions of driving where a larger battery pulls at the wrist. Lithium-ion cells hold charge in storage, so a spare left in the van is ready when it is needed.\u003c\/p\u003e\u003cp\u003eAdd one to a bare tool bought without a battery, keep a pair in rotation with a charger, or replace a pack that has come to the end of its service life.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eVoltage: 20V\u003c\/li\u003e\n\u003cli\u003eLithium-ion battery, 2.0Ah\u003c\/li\u003e\n\u003cli\u003eLED battery power indicator\u003c\/li\u003e\n\u003cli\u003eOne battery fits all P20S tools\u003c\/li\u003e\n\u003cli\u003eSupplied in a colour box\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43181243531335,"sku":"EBPK20011","price":2990.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EBPK20011_000795.jpg?v=1788986408"},{"product_id":"emtop-lithium-ion-battery-pack-20v-4-0ah-ebpk2002","title":"EMTOP Lithium-Ion Battery Pack 20V 4.0Ah EBPK2002","description":"\u003cp\u003eRuntime is the reason to choose the 4.0Ah pack. Twice the capacity of the smaller battery, it suits the tools that draw hardest on the P20S platform, a rotary hammer, a pressure washer or a brush cutter, where a light pack is emptied before the task is finished.\u003c\/p\u003e\u003cp\u003eAn LED power indicator reports the remaining charge at a glance, so packs can be sorted into full and flat before leaving the workshop. The extra cells add weight, which is a fair trade on a tool used from the ground or on a strap and less so overhead, and many crews carry one of each size for that reason. As with the rest of the range, one battery fits all P20S tools, so the pack is never tied to a single machine.\u003c\/p\u003e\u003cp\u003eUse it as the main pack on demanding tools, as a second battery to keep a charger cycle going, or as a replacement for a pack that no longer holds its charge.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eVoltage: 20V\u003c\/li\u003e\n\u003cli\u003eLithium-ion battery, 4.0Ah\u003c\/li\u003e\n\u003cli\u003eLED battery power indicator\u003c\/li\u003e\n\u003cli\u003eOne battery fits all P20S tools\u003c\/li\u003e\n\u003cli\u003eSupplied in a colour box\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43181243596871,"sku":"EBPK2002","price":6320.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EBPK2002_000796.jpg?v=1788986425"},{"product_id":"emtop-grass-trimmer-line-spool-2-5mm-x-4m-elsl25401","title":"EMTOP Grass Trimmer Line Spool 2.5mm x 4m ELSL25401","description":"\u003cp\u003eTrimmer line wears down every time it meets a kerb or a fence post, so a ready-loaded spool saves time on a long day of grounds work. This EMTOP line spool comes wound with 4 metres of 2.5mm cutting line and drops into the head of the matching petrol trimmer.\u003c\/p\u003e\u003cp\u003eAt 2.5mm the line has enough body to cut through coarse grass and soft weed stems without shredding on the first pass, which means fewer stops to feed line and a tidier finish along edges. Because the spool is supplied already wound, there is no threading of loose line in the field, and a spare can travel in the van ready to swap.\u003c\/p\u003e\u003cp\u003eIt is intended for lawn and compound maintenance, roadside and estate edging, school and institutional grounds, and general plot tidying. The spool fits the EMTOP EGTC55211, EGTC3122, EGTC6212, EGTC6221, EGTC5212, EGTC5221, EGTC4312 and EGTC4321 petrol grass trimmers.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine diameter:\u003c\/strong\u003e 2.5mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine length:\u003c\/strong\u003e 4m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuitable for:\u003c\/strong\u003e EGTC55211, EGTC3122, EGTC6212, EGTC6221, EGTC5212, EGTC5221, EGTC4312 and EGTC4321 petrol grass trimmers\u003c\/li\u003e\n\u003cli\u003eSupplied in double blister packaging\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43181248446535,"sku":"ELSL25401","price":1040.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/ELSL25401_000943.jpg?v=1788986672"},{"product_id":"emtop-electrode-holder-500a-netherlands-type-eehr5001","title":"EMTOP Electrode Holder 500A Netherlands Type EEHR5001","description":"\u003cp\u003eA welding lead is only as good as the holder on the end of it. This EMTOP electrode holder is the Netherlands pattern, the fully insulated screw-shell design that grips the rod firmly and lets the welder change electrodes quickly without exposing live metal to the hand.\u003c\/p\u003e\u003cp\u003eIt carries a 500A rating, which places it comfortably above the output of most workshop and site stick sets, and it is intended for MMA welding machines below 500A. The Netherlands type body shrouds the electrode stub and the jaw, so the holder can be set down between runs with less risk of arcing against the workpiece or the bench.\u003c\/p\u003e\u003cp\u003eIt suits fabrication shops, steel window and gate makers, structural steel crews, plant maintenance teams and welding equipment hire. Keep one as a spare in the toolbox, since holders are usually the first part of a welding set to wear out under daily use.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated current:\u003c\/strong\u003e 500A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Netherlands type\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuitable for:\u003c\/strong\u003e MMA welding machines below 500A\u003c\/li\u003e\n\u003cli\u003eSupplied in a carton box\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43181251723335,"sku":"EEHR5001","price":740.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EEHR5001_000853.jpg?v=1788986824"},{"product_id":"emtop-s12-battery-charger-12v-0-65a-efcr12070","title":"EMTOP S12 Battery Charger 12V 0.65A EFCR12070","description":"\u003cp\u003eA charger is easy to mislay and awkward to be without. This is the mains charger for EMTOP's S12 cordless platform, useful as a replacement for one that has been lost or damaged, or as a second unit so packs can be charged at the workshop and at home.\u003c\/p\u003e\u003cp\u003eIt takes a 220-240V supply at 50 or 60Hz and delivers 12V at 0.65A to the pack. That is a steady, unhurried rate rather than a fast charge, which is the ordinary arrangement for compact 12V batteries and keeps the unit small enough to travel in a tool bag or a drawer without adding bulk. Being a mains unit, it works wherever a socket is available on site, in the workshop or at home.\u003c\/p\u003e\u003cp\u003eKeep one alongside a spare S12 battery so a pack is always charging while another is in the tool, or add it to a bare tool bought without a charger in the box. Fitters who share tools across a team often keep a charger at each bench for the same reason, so no one is waiting on a single unit at the start of a shift.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInput voltage: 220-240V~50\/60Hz\u003c\/li\u003e\n\u003cli\u003eOutput voltage: 12V\u003c\/li\u003e\n\u003cli\u003eOutput current: 0.65A\u003c\/li\u003e\n\u003cli\u003eSupplied in a colour box\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43181254869063,"sku":"EFCR12070","price":580.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EFCR12070_000857.jpg?v=1788986993"},{"product_id":"emtop-multi-tool-blade-set-15pcs-crv-and-bim-emtb1501","title":"EMTOP Multi Tool Blade Set 15pcs CRV and BIM EMTB1501","description":"\u003cp\u003eAn oscillating multi tool earns its keep on refurbishment work, and this 15-piece EMTOP set covers the accessories most often reached for. It combines cutting, sanding and scraping heads in one blister pack, so a maintenance team can arrive with the right head already to hand rather than buying blades one at a time.\u003c\/p\u003e\u003cp\u003eThe set is built around an 87mm bi-metal segment saw blade for plunge and arc cuts, a 34mm chrome vanadium radial flush-cut blade for timber and a 34mm bi-metal flush-cut blade for metal such as nails and screws. An 80mm delta sanding pad and ten aluminium oxide delta sheets handle detail sanding in corners, while a 50mm rigid scraper lifts adhesive, sealant and old floor coverings.\u003c\/p\u003e\u003cp\u003eUse it for cutting out damaged skirting and architrave, trimming door frames for flooring, notching board, removing tile adhesive and silicone, and finishing sanding where a random orbit sander cannot reach. It suits joiners, shopfitters, plumbers and general refurbishment crews.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSet contents:\u003c\/strong\u003e 15 pieces\u003c\/li\u003e\n\u003cli\u003e1 bi-metal (M2) segment saw blade, 87mm (3-7\/16 inch)\u003c\/li\u003e\n\u003cli\u003e1 delta sanding pad, 80mm (3-1\/8 inch)\u003c\/li\u003e\n\u003cli\u003e10 aluminium oxide delta sandpaper sheets for wood, 80mm (3-1\/8 inch)\u003c\/li\u003e\n\u003cli\u003e1 chrome vanadium radial flush-cut wood saw blade, 34mm (1-5\/16 inch)\u003c\/li\u003e\n\u003cli\u003e1 bi-metal standard flush-cut metal saw blade, 34mm (1-5\/16 inch)\u003c\/li\u003e\n\u003cli\u003e1 rigid scraper, 50mm (2 inch)\u003c\/li\u003e\n\u003cli\u003eSupplied in double blister packaging\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43181254901831,"sku":"EMTB1501","price":1250.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EMTB1501_000957.jpg?v=1788986993"},{"product_id":"emtop-20v-li-ion-battery-charger-2a-efcr20200","title":"EMTOP 20V Li-ion Battery Charger 2A EFCR20200","description":"\u003cp\u003eCordless kits are built around the charger as much as the tool, and a second unit is worth having: one on the bench, one in the van, so a discharged pack is never the reason work stops. This charger runs from a 220-240V supply at 50 or 60Hz and delivers 20V at 2A to EMTOP 20V battery packs.\u003c\/p\u003e\u003cp\u003eIt is the same charger packed with the 20V drills, drivers, blowers, trimmers and saws in the range, which makes it the correct replacement when the original has been damaged on site or left behind at a previous job. Keeping a spare also lets a two-battery kit run continuously, with one pack charging while the other is in the tool.\u003c\/p\u003e\u003cp\u003eContractors running several 20V tools, hire companies maintaining fleets, and workshops that share batteries across a team are the usual buyers, as are households whose original charger has been misplaced during a move. Charging from ordinary mains means the unit works anywhere there is a socket, including from a small generator or inverter on a site without a permanent supply. It is supplied in a colour box.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: EFCR20200\u003c\/li\u003e\n\u003cli\u003eInput voltage: 220-240V~50\/60Hz\u003c\/li\u003e\n\u003cli\u003eOutput voltage: 20V\u003c\/li\u003e\n\u003cli\u003eOutput current: 2A\u003c\/li\u003e\n\u003cli\u003ePacked in a colour box\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43181255032903,"sku":"EFCR20200","price":1300.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EFCR20200_000859.jpg?v=1788987009"},{"product_id":"emtop-fast-intelligent-charger-20v-4a-efcr20203","title":"EMTOP Fast Intelligent Charger 20V 4A EFCR20203","description":"\u003cp\u003eA second charger is often what turns two batteries into a working system. This 20V fast intelligent charger is for anyone running EMTOP cordless tools who cannot afford to stand and wait, whether that is a fitting crew with one van or a workshop keeping packs turned round through the day.\u003c\/p\u003e\u003cp\u003eCharging current is 4A, which brings a 20V 2.0Ah pack back in half an hour and a 20V 4.0Ah pack in an hour. In practice that means a spare pack is ready before the one in the tool runs down, so work continues without a break in the middle of a fix or a cut. The intelligent control manages the charge cycle rather than simply pushing current until the pack is full.\u003c\/p\u003e\u003cp\u003eKeep one on the bench and one in the van, or add it alongside a bare tool bought without a charger, so batteries shared between a drill, a grinder and a sprayer stay in rotation.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eVoltage: 20V\u003c\/li\u003e\n\u003cli\u003eCharge current: 4A\u003c\/li\u003e\n\u003cli\u003eCharges a 20V 2.0Ah battery in 0.5 hours\u003c\/li\u003e\n\u003cli\u003eCharges a 20V 4.0Ah battery in 1 hour\u003c\/li\u003e\n\u003cli\u003eSupplied in a colour box\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43181255262279,"sku":"EFCR20203","price":2570.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EFCR20203_000860.jpg?v=1788987031"},{"product_id":"emtop-glue-gun-sticks-11-2mm-x-20cm-6-pack-eggs20601","title":"EMTOP Glue Gun Sticks 11.2mm x 20cm 6 Pack EGGS20601","description":"\u003cp\u003eHot melt sticks are a consumable, and running out mid-job is a nuisance, so it pays to keep a pack on the shelf. These EMTOP glue sticks are the large 11.2mm size used by full-size hot glue guns, supplied six to a pack on a blister card that hangs neatly in a shop display.\u003c\/p\u003e\u003cp\u003eEach stick is moulded from petroleum resin and measures 20cm long, so it feeds through the barrel of a standard gun and gives a useful run of adhesive before the next stick is needed. The generous diameter suits guns with a higher output nozzle, where thin craft sticks would rattle in the feed.\u003c\/p\u003e\u003cp\u003eUse them for upholstery and furniture assembly, signage, packaging and display work, floral and craft projects, cable tidying, model making and quick shop repairs. They are a natural add-on for hardware counters, stationery shops and anyone already selling glue guns.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e petroleum resin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 11.2mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 20cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack quantity:\u003c\/strong\u003e 6 sticks\u003c\/li\u003e\n\u003cli\u003eSupplied on a blister card\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43181258408007,"sku":"EGGS20601","price":260.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EGGS20601_000870.jpg?v=1788987341"}],"url":"https:\/\/ahihqtraders.com\/collections\/power-tool-accessories.oembed","provider":"AHIHQ Traders","version":"1.0","type":"link"}