{"title":"Pumps \u0026 Water","description":"\u003cp\u003eWater pumps, pump controls, accessories and water treatment equipment.\u003c\/p\u003e","products":[{"product_id":"emtop-4-inch-deep-well-pump-370w-0-5hp-48m-head-ewppd03701","title":"EMTOP 4 Inch Deep Well Pump 370W 0.5HP 48m Head EWPPD03701","description":"\u003cp\u003eHouseholds and smallholdings drawing from a borehole need a pump sized to the depth of water, not simply the biggest available. This EMTOP 4 inch deep well pump is the entry point of the range at 370W, half a horsepower, lifting to a maximum head of 48 metres.\u003c\/p\u003e\u003cp\u003eWater passes through a six stage impeller, each stage adding pressure so the pump can push a steady flow up a long column rather than relying on one wheel. Maximum flow is 6.0 cubic metres per hour through a 1-1\/4 inch discharge. The motor is wound with copper wire and the pump body is stainless steel, a combination chosen for continuous immersion in a 4 inch bore. Twenty metres of cable are fitted, so the wellhead connection can be made without an early joint. The control box is not included.\u003c\/p\u003e\u003cp\u003eUse it for domestic boreholes, small farm and irrigation supply, livestock watering, school and clinic water systems, and topping up storage tanks.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 220-240V~50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated power:\u003c\/strong\u003e 370W (0.5HP)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum head:\u003c\/strong\u003e 48m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow:\u003c\/strong\u003e 6.0 cubic metres per hour\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe diameter:\u003c\/strong\u003e 1-1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWell pump body:\u003c\/strong\u003e 4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpeller:\u003c\/strong\u003e 6 stage\u003c\/li\u003e\n\u003cli\u003eCopper wire motor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump body:\u003c\/strong\u003e stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable length:\u003c\/strong\u003e 20m\u003c\/li\u003e\n\u003cli\u003eControl box not included\u003c\/li\u003e\n\u003cli\u003eSupplied in a carton box\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180909592647,"sku":"EWPPD03701","price":16880.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EWPPD03701_001057.jpg?v=1788978936"},{"product_id":"emtop-4-inch-deep-well-pump-550w-0-75hp-64m-head-ewppd05501","title":"EMTOP 4 Inch Deep Well Pump 550W 0.75HP 64m Head EWPPD05501","description":"\u003cp\u003eWhere the standing water level sits deeper than a half horsepower pump can comfortably serve, this EMTOP 4 inch deep well pump steps in at 550W, three quarters of a horsepower, with a maximum head of 64 metres. It is a practical middle size for domestic and light agricultural boreholes.\u003c\/p\u003e\u003cp\u003eEight impeller stages build the pressure needed for that lift while holding a maximum flow of 6.0 cubic metres per hour, delivered through a 1-1\/4 inch pipe connection. The stainless steel pump body resists corrosion during permanent immersion, and the copper wound motor is built for the long running hours that tank filling demands. A 20 metre cable is fitted from the factory. The control box is supplied separately.\u003c\/p\u003e\u003cp\u003eTypical installations include homestead boreholes, guest houses and rentals, small scale irrigation, dairy and poultry units, and institutional water supply where a storage tank is filled once or twice a day. Match the pump to the bore depth and yield before installation.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 220-240V~50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated power:\u003c\/strong\u003e 550W (0.75HP)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum head:\u003c\/strong\u003e 64m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow:\u003c\/strong\u003e 6.0 cubic metres per hour\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe diameter:\u003c\/strong\u003e 1-1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWell pump body:\u003c\/strong\u003e 4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpeller:\u003c\/strong\u003e 8 stage\u003c\/li\u003e\n\u003cli\u003eCopper wire motor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump body:\u003c\/strong\u003e stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable length:\u003c\/strong\u003e 20m\u003c\/li\u003e\n\u003cli\u003eControl box not included\u003c\/li\u003e\n\u003cli\u003eSupplied in a carton box\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180911263815,"sku":"EWPPD05501","price":18510.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EWPPD05501_001058.jpg?v=1788978962"},{"product_id":"emtop-4-inch-deep-well-pump-750w-1hp-82m-head-ewppd07501","title":"EMTOP 4 Inch Deep Well Pump 750W 1HP 82m Head EWPPD07501","description":"\u003cp\u003eOne horsepower is the size most commonly specified for a family borehole feeding an elevated tank, and this EMTOP 4 inch deep well pump sits exactly there. Rated 750W, it lifts to a maximum head of 82 metres, enough for a deeper bore or a tank stand well above the wellhead.\u003c\/p\u003e\u003cp\u003eTen impeller stages generate that pressure while maintaining a maximum flow of 6.0 cubic metres per hour through a 1-1\/4 inch discharge. Construction follows the rest of the range: a copper wire motor, a stainless steel pump body sized for a 4 inch bore, and 20 metres of cable already fitted so the installer has slack to work with at the head. A control box is required and is not included.\u003c\/p\u003e\u003cp\u003eIt is suited to residential boreholes, rental and apartment blocks, farms running drip or sprinkler lines, schools, clinics and small commercial premises. Confirm the bore yield and dynamic water level so the pump is not run dry.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 220-240V~50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated power:\u003c\/strong\u003e 750W (1.0HP)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum head:\u003c\/strong\u003e 82m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow:\u003c\/strong\u003e 6.0 cubic metres per hour\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe diameter:\u003c\/strong\u003e 1-1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWell pump body:\u003c\/strong\u003e 4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpeller:\u003c\/strong\u003e 10 stage\u003c\/li\u003e\n\u003cli\u003eCopper wire motor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump body:\u003c\/strong\u003e stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable length:\u003c\/strong\u003e 20m\u003c\/li\u003e\n\u003cli\u003eControl box not included\u003c\/li\u003e\n\u003cli\u003eSupplied in a carton box\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180927942727,"sku":"EWPPD07501","price":19850.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EWPPD07501_001059.jpg?v=1788979183"},{"product_id":"emtop-4-inch-deep-well-pump-1100w-1-5hp-112m-ewppd11001","title":"EMTOP 4 Inch Deep Well Pump 1100W 1.5HP 112m EWPPD11001","description":"\u003cp\u003eDeeper boreholes and long uphill delivery runs need real pressure behind the water. Rated 1100W, or 1.5 horsepower, this EMTOP 4 inch deep well pump reaches a maximum head of 112 metres, which covers most residential and light commercial bores in the region.\u003c\/p\u003e\u003cp\u003eFourteen impeller stages produce that lift, each adding its share of pressure, while maximum flow stays at 6.0 cubic metres per hour through the 1-1\/4 inch outlet. The motor is copper wound and the pump body is stainless, chosen for permanent immersion in a 4 inch casing, and 20 metres of cable come fitted so the installer can reach the wellhead without an early splice. Order the matching control box separately.\u003c\/p\u003e\u003cp\u003eConsider it for deep domestic boreholes, apartment blocks and gated developments, farm irrigation, greenhouses, hotels and lodges, and any site where water must climb to a high tank. Size the pump against the tested yield of the bore before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 220-240V~50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated power:\u003c\/strong\u003e 1100W (1.5HP)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum head:\u003c\/strong\u003e 112m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow:\u003c\/strong\u003e 6.0 cubic metres per hour\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe diameter:\u003c\/strong\u003e 1-1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWell pump body:\u003c\/strong\u003e 4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpeller:\u003c\/strong\u003e 14 stage\u003c\/li\u003e\n\u003cli\u003eCopper wire motor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump body:\u003c\/strong\u003e stainless\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable length:\u003c\/strong\u003e 20m\u003c\/li\u003e\n\u003cli\u003eControl box not included\u003c\/li\u003e\n\u003cli\u003eSupplied in a carton box\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180928860231,"sku":"EWPPD11001","price":23190.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EWPPD11001_001060.jpg?v=1788979205"},{"product_id":"emtop-4-inch-deep-well-pump-1500w-2hp-135m-ewppd15001","title":"EMTOP 4 Inch Deep Well Pump 1500W 2HP 135m EWPPD15001","description":"\u003cp\u003eAt the top of the EMTOP 4 inch borehole range sits this 1500W pump, two horsepower, with a maximum head of 135 metres. It is the choice when the water table is low, the tank stand is high, or the delivery line runs a long way uphill from the wellhead.\u003c\/p\u003e\u003cp\u003eSeventeen impeller stages build the column pressure required for that lift, with maximum flow held at 6.0 cubic metres per hour through a 1-1\/4 inch discharge. The motor uses copper windings and the pump body is stainless steel for continuous submerged duty, and 20 metres of cable are supplied on the unit. The control box is ordered separately and should be matched to this model.\u003c\/p\u003e\u003cp\u003eIt is aimed at deep boreholes, farms and irrigation schemes, lodges and institutions, water vending points and multi-tenant developments. As with any borehole pump, install it above the pump intake level recommended for the bore and protect it against dry running.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 220-240V~50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated power:\u003c\/strong\u003e 1500W (2HP)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum head:\u003c\/strong\u003e 135m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow:\u003c\/strong\u003e 6.0 cubic metres per hour\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe diameter:\u003c\/strong\u003e 1-1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWell pump body:\u003c\/strong\u003e 4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpeller:\u003c\/strong\u003e 17 stage\u003c\/li\u003e\n\u003cli\u003eCopper wire motor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump body:\u003c\/strong\u003e stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable length:\u003c\/strong\u003e 20m\u003c\/li\u003e\n\u003cli\u003eControl box not included\u003c\/li\u003e\n\u003cli\u003eSupplied in a carton box\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180930531399,"sku":"EWPPD15001","price":27410.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EWPPD15001_001061.jpg?v=1788979227"},{"product_id":"emtop-submersible-sewage-pump-for-dirty-water-ewppq07508","title":"EMTOP Submersible Sewage Pump for Dirty Water EWPPQ07508","description":"\u003cp\u003eSewage and waste water carry solids that would block a clean-water pump, so a pump built for the duty uses a wider passage and an impeller designed to pass what comes through it.\u003c\/p\u003e\u003cp\u003eThe unit sits in the liquid it is moving, which keeps it primed and quiet, and lifts the contents out through a hose or pipe to the discharge point.\u003c\/p\u003e\u003cp\u003eTypical duties include septic and holding pits, drainage sumps, basement and pit dewatering after heavy rain, and construction sites where dirty water has to be cleared before work can resume.\u003c\/p\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180932300871,"sku":"EWPPQ07508","price":7850.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EWPPQ07508_001063.jpg?v=1788979245"},{"product_id":"emtop-submersible-clean-water-pump-370w-0-5hp-ewpps03701","title":"EMTOP Submersible Clean Water Pump 370W 0.5HP EWPPS03701","description":"\u003cp\u003eEmptying a sump, a tank or a flooded basement is a job for a pump that can sit in the water and get on with it. This EMTOP submersible pump is rated 370W, half a horsepower, and is designed for clean water duty with a float switch that starts and stops it as the level rises and falls.\u003c\/p\u003e\u003cp\u003eIt lifts to a maximum head of 17 metres and moves up to 100 litres per minute through a 1 inch outlet, a useful combination for transfer and drainage rather than high pressure delivery. The motor is copper wound with thermal protection, and the base, screws and shaft are stainless steel, so the wetted parts stand up to constant immersion. Nine metres of cable let the pump work well below the point where it is plugged in.\u003c\/p\u003e\u003cp\u003eUse it for water tank emptying and cleaning, sump and pit drainage, flooded floors, transferring between tanks and topping up reservoirs.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 220-240V~50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated power:\u003c\/strong\u003e 370W (0.5HP)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum head:\u003c\/strong\u003e 17m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow:\u003c\/strong\u003e 100L\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe diameter:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable length:\u003c\/strong\u003e 9m\u003c\/li\u003e\n\u003cli\u003eCopper wire motor\u003c\/li\u003e\n\u003cli\u003eStainless steel base, screws and shaft\u003c\/li\u003e\n\u003cli\u003eThermal protection\u003c\/li\u003e\n\u003cli\u003eFitted with a float switch\u003c\/li\u003e\n\u003cli\u003eFor clean water\u003c\/li\u003e\n\u003cli\u003eSupplied in a carton box\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180933906503,"sku":"EWPPS03701","price":9320.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EWPPS03701_001064.jpg?v=1788979266"},{"product_id":"emtop-submersible-clean-water-pump-750w-1hp-ewpps07501","title":"EMTOP Submersible Clean Water Pump 750W 1HP EWPPS07501","description":"\u003cp\u003eStepping up from the half horsepower model, this EMTOP submersible pump is rated 750W and pushes water to a maximum head of 32 metres at up to 120 litres per minute. It is the size to choose when the discharge point is well above the tank or the run of hose is long.\u003c\/p\u003e\u003cp\u003eThe pump is intended for clean water and comes with a float switch, so it can be left to empty a tank and switch itself off before running dry. Thermal protection guards the copper wound motor against overheating, and the base, screws and shaft are stainless steel for long immersion. A 1 inch outlet takes standard hose or pipe fittings, and 9 metres of cable give reach down into a deep tank or pit.\u003c\/p\u003e\u003cp\u003eTypical uses include tank cleaning and transfer, borehole and reservoir top-up, drainage of pits and basements, construction site water clearing, and pumping between storage tanks on farms and compounds.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 220-240V~50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated power:\u003c\/strong\u003e 750W (1.0HP)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum head:\u003c\/strong\u003e 32m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow:\u003c\/strong\u003e 120L\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe diameter:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable length:\u003c\/strong\u003e 9m\u003c\/li\u003e\n\u003cli\u003eCopper wire motor\u003c\/li\u003e\n\u003cli\u003eStainless steel base, screws and shaft\u003c\/li\u003e\n\u003cli\u003eThermal protection\u003c\/li\u003e\n\u003cli\u003eFitted with a float switch\u003c\/li\u003e\n\u003cli\u003eFor clean water\u003c\/li\u003e\n\u003cli\u003eSupplied in a carton box\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180945473607,"sku":"EWPPS07501","price":13710.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EWPPS07501_001065.jpg?v=1788979407"},{"product_id":"emtop-deep-well-pump-control-box-for-ewppd03701-ewsbd03701","title":"EMTOP Deep Well Pump Control Box for EWPPD03701 EWSBD03701","description":"\u003cp\u003eA submersible borehole pump is supplied without its control box, and the box is not optional: it starts the motor, carries the run capacitor and protects the winding. This EMTOP control box is the matching unit for the EWPPD03701 deep well pump.\u003c\/p\u003e\u003cp\u003eIt runs on a 220-240V, 50Hz supply and includes over-current protection, which trips the circuit if the motor begins drawing more than it should because of a locked rotor, a failing capacitor or a supply fault. That protection is what stands between a stalled pump and a burnt winding fifty metres down a bore, where any repair means pulling the whole column of pipe.\u003c\/p\u003e\u003cp\u003eMount it in the pump house or a sheltered position at the wellhead, wired between the supply and the pump cable. It is the correct replacement where an existing box has been damaged by lightning or a supply surge, and the item to add to the order when a new EWPPD03701 is installed.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated power supply:\u003c\/strong\u003e 220-240V~50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatched pump:\u003c\/strong\u003e EWPPD03701\u003c\/li\u003e\n\u003cli\u003eOver-current protection\u003c\/li\u003e\n\u003cli\u003eSupplied in a carton box\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180945735751,"sku":"EWSBD03701","price":1480.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EWSBD03701_001067.jpg?v=1788979426"},{"product_id":"emtop-deep-well-pump-control-box-for-ewppd05501-ewsbd05501","title":"EMTOP Deep Well Pump Control Box for EWPPD05501 EWSBD05501","description":"\u003cp\u003eEvery EMTOP submersible borehole pump needs a control box matched to its motor, and this one is built for the EWPPD05501. It houses the starting gear for the pump and gives the installer a single point at the surface for switching and protection.\u003c\/p\u003e\u003cp\u003eThe box works from a 220-240V, 50Hz supply and provides over-current protection, cutting power if the motor draws abnormal current. That is the safeguard against a seized impeller, a dropped phase or a sagging supply quietly cooking a motor that nobody can see. Because the electronics sit above ground, a fault in the box can be dealt with in minutes rather than by lifting the pump.\u003c\/p\u003e\u003cp\u003eOrder it alongside a new EWPPD05501 installation, or as the correct replacement where the original box has been damaged by surge, water ingress or age. Fit it in a dry, ventilated position and keep the terminals covered.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated power supply:\u003c\/strong\u003e 220-240V~50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatched pump:\u003c\/strong\u003e EWPPD05501\u003c\/li\u003e\n\u003cli\u003eOver-current protection\u003c\/li\u003e\n\u003cli\u003eSupplied in a carton box\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180946489415,"sku":"EWSBD05501","price":1510.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EWSBD05501_001068.jpg?v=1788979447"},{"product_id":"emtop-deep-well-pump-control-box-for-ewppd07501-ewsbd07501","title":"EMTOP Deep Well Pump Control Box for EWPPD07501 EWSBD07501","description":"\u003cp\u003eThis is the surface control box specified for the EMTOP EWPPD07501 deep well pump. Borehole pumps ship without one, so it should go on the order with the pump, and it is equally the part to replace when an existing box has failed.\u003c\/p\u003e\u003cp\u003ePowered from 220-240V at 50Hz, it starts the submerged motor and monitors what the motor draws, tripping on over-current before a fault has time to damage the winding. Common causes are a jammed impeller, sand ingress, a weak capacitor or a poor supply, and all of them are cheaper to catch at the surface than to discover when the pump is hauled up.\u003c\/p\u003e\u003cp\u003eInstall it in the pump house or another sheltered spot close to the wellhead, wired between the incoming supply and the pump cable, with the enclosure kept dry and the cable glands properly made off. Use it only with the pump model it is matched to.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated power supply:\u003c\/strong\u003e 220-240V~50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatched pump:\u003c\/strong\u003e EWPPD07501\u003c\/li\u003e\n\u003cli\u003eOver-current protection\u003c\/li\u003e\n\u003cli\u003eSupplied in a carton box\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180947439687,"sku":"EWSBD07501","price":1690.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EWSBD07501_001069.jpg?v=1788979466"},{"product_id":"emtop-deep-well-pump-control-box-for-ewppd11001-ewsbd11001","title":"EMTOP Deep Well Pump Control Box for EWPPD11001 EWSBD11001","description":"\u003cp\u003eMatched to the EMTOP EWPPD11001 deep well pump, this control box provides the starting and protection gear that a submersible motor cannot carry inside the bore. It is a required part of the installation rather than an accessory.\u003c\/p\u003e\u003cp\u003eSupply is 220-240V at 50Hz, and the box includes over-current protection that interrupts power when the motor begins pulling more current than its rating allows. On a heavier pump like the 1100W unit, that margin matters: a fault left running will overheat the winding long before anyone at the tap notices a change in flow.\u003c\/p\u003e\u003cp\u003eKeep the box in a dry, ventilated position near the wellhead, with proper glanding and earthing, and leave the cover secured in normal use. It also serves as the replacement box where lightning, a supply surge or water ingress has taken out the original on an existing EWPPD11001 installation.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated power supply:\u003c\/strong\u003e 220-240V~50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatched pump:\u003c\/strong\u003e EWPPD11001\u003c\/li\u003e\n\u003cli\u003eOver-current protection\u003c\/li\u003e\n\u003cli\u003eSupplied in a carton box\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180948226119,"sku":"EWSBD11001","price":1820.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EWSBD11001_001070.jpg?v=1788979485"},{"product_id":"emtop-deep-well-pump-control-box-for-ewppd15001-ewsbd15001","title":"EMTOP Deep Well Pump Control Box for EWPPD15001 EWSBD15001","description":"\u003cp\u003eThe largest pump in the EMTOP borehole range takes this control box. Built for the EWPPD15001, it sits at the surface and does the work the submerged motor cannot do for itself: starting the pump and watching what it draws.\u003c\/p\u003e\u003cp\u003eIt runs from a 220-240V, 50Hz supply and trips on over-current, protecting the winding against a locked rotor, a failed capacitor or a supply problem. On a two horsepower installation the pump is often set deep, so anything that avoids pulling the rising main pays for itself the first time it acts.\u003c\/p\u003e\u003cp\u003eWire it between the incoming supply and the pump cable in a dry, sheltered enclosure at the wellhead, with correct earthing and cable glands. Fit it as part of a new EWPPD15001 installation or as the direct replacement for a damaged original. Use only with the pump model it is matched to.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated power supply:\u003c\/strong\u003e 220-240V~50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatched pump:\u003c\/strong\u003e EWPPD15001\u003c\/li\u003e\n\u003cli\u003eOver-current protection\u003c\/li\u003e\n\u003cli\u003eSupplied in a carton box\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180948848711,"sku":"EWSBD15001","price":1900.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EWSBD15001_001071.jpg?v=1788979504"},{"product_id":"emtop-automatic-pump-control-10a-ip65-1-inch-eapc1001","title":"EMTOP Automatic Pump Control 10A IP65 1 Inch EAPC1001","description":"\u003cp\u003eFitting a pressure controller turns an ordinary booster pump into an automatic water system. This EMTOP automatic pump control starts the pump when a tap opens and stops it when demand ends, removing the need for a pressure vessel and a separate switch, and cutting the pump out if flow is lost.\u003c\/p\u003e\u003cp\u003eIt works on a 220-240V supply at 50\/60Hz, starts at 1.5 bar and handles pumps drawing up to 1100W, with a maximum current of 10A and a maximum working pressure of 10 bar. Connections are 1 inch by 1 inch, so it fits inline on the delivery side of most domestic booster pumps. The housing is rated IP65 against dust and water jets, which matters for a unit that usually lives in a pump house or an outdoor enclosure.\u003c\/p\u003e\u003cp\u003eUse it on domestic pressure boosting, tank to house delivery, shower and instant heater supply, small irrigation lines and light commercial water systems.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated voltage:\u003c\/strong\u003e 220-240V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency:\u003c\/strong\u003e 50\/60Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStarting pressure:\u003c\/strong\u003e 1.5 bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum power allowed:\u003c\/strong\u003e 1100W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum current:\u003c\/strong\u003e 10A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum pressure:\u003c\/strong\u003e 10 bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe diameter:\u003c\/strong\u003e 1 inch x 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection degree:\u003c\/strong\u003e IP65\u003c\/li\u003e\n\u003cli\u003eSupplied in a colour box\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180971884615,"sku":"EAPC1001","price":4250.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EAPC1001_000769.jpg?v=1788979893"},{"product_id":"emtop-automatic-water-pump-pressure-controller-eapc1201","title":"EMTOP Automatic Water Pump Pressure Controller EAPC1201","description":"\u003cp\u003eConstant pressure at the tap, without a bladder tank taking up half the pump house, is what a controller like this delivers. The EMTOP EAPC1201 senses flow and pressure on the delivery line, starting the pump on demand and shutting it down when the taps close or the supply runs dry.\u003c\/p\u003e\u003cp\u003eElectrically it takes 220-240V at 50\/60Hz and will switch pumps drawing up to 1100W, with a 10A maximum current. Starting pressure is set at 1.5 bar and the unit is rated to 10 bar maximum, with 1 inch by 1 inch connections that thread straight into a standard delivery line. An IP65 enclosure keeps dust and splashing water out of the electronics in an exposed pump house.\u003c\/p\u003e\u003cp\u003eFit it to household booster sets, tank-fed plumbing that needs more pressure upstairs, borehole surface pumps, car wash and workshop supply, and small irrigation systems where automatic operation saves someone switching the pump by hand.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated voltage:\u003c\/strong\u003e 220-240V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency:\u003c\/strong\u003e 50\/60Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStarting pressure:\u003c\/strong\u003e 1.5 bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum power allowed:\u003c\/strong\u003e 1100W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum current:\u003c\/strong\u003e 10A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum pressure:\u003c\/strong\u003e 10 bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe diameter:\u003c\/strong\u003e 1 inch x 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection degree:\u003c\/strong\u003e IP65\u003c\/li\u003e\n\u003cli\u003eSupplied in a colour box\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180971917383,"sku":"EAPC1201","price":4250.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EAPC1201_000770.jpg?v=1788979917"},{"product_id":"emtop-submersible-water-pump-for-clean-water-ewpps05501","title":"EMTOP Submersible Water Pump for Clean Water EWPPS05501","description":"\u003cp\u003eSubmersible pumps work from inside the water they are moving, which keeps them primed, quiet and cool without the priming routine an above-ground pump needs.\u003c\/p\u003e\u003cp\u003eThe unit is lowered into the tank, sump or well and discharges through a hose or riser pipe to the storage tank or supply point above.\u003c\/p\u003e\u003cp\u003eHouseholds, farms, sites and estates use them for filling storage tanks, drawing from underground tanks and wells, transferring between tanks and clearing standing water. Keep the pump clear of silt at the bottom of the chamber so it draws clean water rather than sediment.\u003c\/p\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180985745479,"sku":"EWPPS05501","price":17620.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EWPPS05501_004515.jpg?v=1788980161"},{"product_id":"emtop-diesel-water-pump-4-inch-1420l-min-edwp10011","title":"EMTOP Diesel Water Pump 4 Inch 1420L\/min EDWP10011","description":"\u003cp\u003eMoving large volumes of water where there is no mains electricity is the job this pump was built for. The EMTOP EDWP10011 is a 4 inch diesel transfer pump with 100mm suction and discharge ports, aimed at farmers, irrigation contractors, borehole crews and site teams clearing flooded excavations.\u003c\/p\u003e\n\u003cp\u003eDrive comes from an 8.3HP diesel engine of 418cc with recoil starting, chosen for long working days and the lower running cost of diesel over petrol. Flow reaches 1420 litres per minute, the pump lifts to a 25m head and draws from as deep as 7m, so it copes with a river bank, a dam or a sump well below the machine. A 12.5L fuel tank keeps refuelling stops down during a long transfer.\u003c\/p\u003e\n\u003cp\u003eCommon applications include irrigating smallholdings and greenhouses, filling and emptying storage tanks, dewatering foundations and trenches after rain, and general water transfer around farms, quarries and construction sites.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e EDWP10011\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuction and discharge port diameter:\u003c\/strong\u003e 100mm, 4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow:\u003c\/strong\u003e 1420L\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum head lift:\u003c\/strong\u003e 25m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum suction head:\u003c\/strong\u003e 7m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine:\u003c\/strong\u003e 8.3HP diesel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplacement:\u003c\/strong\u003e 418cc\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel tank:\u003c\/strong\u003e 12.5L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStarting:\u003c\/strong\u003e recoil\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43181248708679,"sku":"EDWP10011","price":85170.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EDWP10011_000847.jpg?v=1788986691"},{"product_id":"emtop-diesel-water-pump-3-inch-1000l-min-edwp8011","title":"EMTOP Diesel Water Pump 3 Inch 1000L\/min EDWP8011","description":"\u003cp\u003eWhere a larger-bore machine is more pump than the job needs, this 3 inch diesel unit gives most of the head with a smaller, lighter engine. The EMTOP EDWP8011 has 80mm suction and discharge ports and suits farmers, plumbers, tank contractors and site crews who move water daily away from a mains socket.\u003c\/p\u003e\n\u003cp\u003eA 5.5HP diesel engine of 296cc turns the impeller, started by recoil pull. Output peaks at 1000 litres per minute with a 28m maximum head lift, higher than the larger-bore model, so it pushes water further uphill to a tank or a distant field. Suction head reaches 7m, and the 12.5L tank supports a full shift of pumping between fills.\u003c\/p\u003e\n\u003cp\u003ePut it to work on drip and furrow irrigation, filling elevated storage tanks, emptying ponds and septic sumps, washing down plant and yards, and clearing standing water from foundations and basements after heavy rain. Because the engine runs on diesel rather than petrol, fuel is easier to store on a farm alongside a tractor supply and the pump is cheaper to keep working through a long dry season.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e EDWP8011\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuction and discharge port diameter:\u003c\/strong\u003e 80mm, 3 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow:\u003c\/strong\u003e 1000L\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum head lift:\u003c\/strong\u003e 28m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum suction head:\u003c\/strong\u003e 7m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine:\u003c\/strong\u003e 5.5HP diesel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplacement:\u003c\/strong\u003e 296cc\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel tank:\u003c\/strong\u003e 12.5L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStarting:\u003c\/strong\u003e recoil\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43181248806983,"sku":"EDWP8011","price":67260.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EDWP8011_000848.jpg?v=1788986715"},{"product_id":"emtop-petrol-water-pump-2-inch-550l-min-egwp5012","title":"EMTOP Petrol Water Pump 2 Inch 550L\/min EGWP5012","description":"\u003cp\u003eA 2 inch pump is the one that gets carried up a bank, dropped beside a stream and started in a minute. The EMTOP EGWP5012 has 50mm suction and discharge ports and suits smallholders, plumbers, tank cleaners, car wash operators and site teams handling modest volumes at good pressure.\u003c\/p\u003e\n\u003cp\u003eA 7.0HP petrol engine of 208cc drives the impeller with recoil starting. Flow reaches 550 litres per minute against a 32m maximum head, so water can be pushed well uphill to a raised tank rather than merely moved sideways. Suction head is 8m, letting the pump draw from a deep sump or a low river without repositioning. The 3.6L tank keeps the machine light and quick to refuel.\u003c\/p\u003e\n\u003cp\u003eUse it for garden and greenhouse irrigation, filling and draining storage tanks, emptying swimming pools and fish ponds, washing vehicles and yards, and clearing water from trenches and flooded ground. Petrol starting is easier on a cold morning than diesel, which makes this the practical choice where the pump is used in short bursts rather than run all day.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e EGWP5012\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuction and discharge port diameter:\u003c\/strong\u003e 50mm, 2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow:\u003c\/strong\u003e 550L\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum head lift:\u003c\/strong\u003e 32m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum suction head:\u003c\/strong\u003e 8m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine:\u003c\/strong\u003e 7.0HP petrol\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplacement:\u003c\/strong\u003e 208cc\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel tank:\u003c\/strong\u003e 3.6L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStarting:\u003c\/strong\u003e recoil\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43181258768455,"sku":"EGWP5012","price":20690.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EGWP5012_000874.jpg?v=1788987424"},{"product_id":"emtop-petrol-water-pump-3-inch-1000l-min-egwp8012","title":"EMTOP Petrol Water Pump 3 Inch 1000L\/min EGWP8012","description":"\u003cp\u003eDoubling the port size roughly doubles the volume, and that is why contractors keep a 3 inch pump on the lorry. The EMTOP EGWP8012 has 80mm suction and discharge ports and is built for farmers, irrigation crews, borehole and tank installers and builders clearing water from open ground.\u003c\/p\u003e\n\u003cp\u003eThe same 7.0HP petrol engine of 208cc used on the smaller unit drives this pump, so the 32m maximum head is retained while flow rises to 1000 litres per minute. Recoil starting keeps the machine simple with no battery to charge, suction reaches 8m below the pump, and the 3.6L fuel tank stays small enough that the unit remains portable by two people.\u003c\/p\u003e\n\u003cp\u003eIt handles field and orchard irrigation, filling raised storage tanks and water bowsers, emptying dams, ponds and pits, washing down plant, yards and vehicles, and drainage of foundations and trenches during the rains. Fitting the shortest practical suction hose and keeping the strainer clear of silt will help the pump hold its rated flow on site.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e EGWP8012\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuction and discharge port diameter:\u003c\/strong\u003e 80mm, 3 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow:\u003c\/strong\u003e 1000L\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum head lift:\u003c\/strong\u003e 32m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum suction head:\u003c\/strong\u003e 8m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine:\u003c\/strong\u003e 7.0HP petrol\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplacement:\u003c\/strong\u003e 208cc\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel tank:\u003c\/strong\u003e 3.6L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStarting:\u003c\/strong\u003e recoil\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43181258932295,"sku":"EGWP8012","price":22850.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EGWP8012_000875.jpg?v=1788987442"},{"product_id":"emtop-centrifugal-water-pump-750w-1hp-30m-head-ewppc07501","title":"EMTOP Centrifugal Water Pump 750W 1HP 30m Head EWPPC07501","description":"\u003cp\u003eA surface centrifugal pump is the workhorse of tank-to-house plumbing, and this EMTOP model at 750W covers most domestic duties. It draws from a tank, sump or shallow well and delivers a strong, steady flow, reaching a maximum head of 30 metres.\u003c\/p\u003e\u003cp\u003eFlow runs to 110 litres per minute, the highest in this group of surface pumps, with a maximum suction lift of 8 metres and 1 inch by 1 inch connections on both sides. The impeller is stainless steel and the shaft is a stainless welded 304 and 45# assembly, while the electrophoresis coated pump body resists rust in a damp pump house. The motor is copper wound and a 0.3 metre cable is fitted for connection to a local socket or isolator.\u003c\/p\u003e\u003cp\u003eIt suits underground tank to overhead tank transfer, house pressure boosting, garden and small irrigation lines, car washing and general water movement on plots, farms and small commercial premises.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e centrifugal pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 220-240V~50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated power:\u003c\/strong\u003e 750W (1.0HP)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum head:\u003c\/strong\u003e 30m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow:\u003c\/strong\u003e 110L\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum suction:\u003c\/strong\u003e 8m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe diameter:\u003c\/strong\u003e 1 inch x 1 inch\u003c\/li\u003e\n\u003cli\u003eCopper wire motor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShaft:\u003c\/strong\u003e stainless steel welded, 304 and 45#\u003c\/li\u003e\n\u003cli\u003eElectrophoresis pump body\u003c\/li\u003e\n\u003cli\u003eStainless steel impeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable length:\u003c\/strong\u003e 0.3m\u003c\/li\u003e\n\u003cli\u003eSupplied in a carton box\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43181260734535,"sku":"EWPPC07501","price":11640.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EWPPC07501_001056.jpg?v=1788987555"},{"product_id":"emtop-self-priming-jet-pump-750w-1hp-51m-head-ewppj07501","title":"EMTOP Self Priming Jet Pump 750W 1HP 51m Head EWPPJ07501","description":"\u003cp\u003eWhere the water sits below the pump and the delivery has to climb, a jet pump earns its place. This EMTOP self-priming jet pump is rated 750W and reaches a maximum head of 51 metres, considerably higher than a plain centrifugal unit of the same power, with a maximum suction lift of 9 metres.\u003c\/p\u003e\u003cp\u003eBeing self-priming, it clears air from the suction line and re-establishes flow after the level drops or the line is opened, which saves the routine of priming by hand every morning. Flow is 55 litres per minute through 1 inch by 1 inch connections. Inside, a stainless steel impeller runs on a stainless welded 304 and 45# shaft, the body is electrophoresis coated against corrosion, and the motor is copper wound. A 0.3 metre cable is fitted.\u003c\/p\u003e\u003cp\u003eUse it on shallow wells and sumps, underground tank supply, pressure boosting for multi-storey houses, irrigation lines and livestock watering where lift matters more than volume.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e self-priming jet pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 220-240V~50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated power:\u003c\/strong\u003e 750W (1.0HP)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum head:\u003c\/strong\u003e 51m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow:\u003c\/strong\u003e 55L\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum suction:\u003c\/strong\u003e 9m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe diameter:\u003c\/strong\u003e 1 inch x 1 inch\u003c\/li\u003e\n\u003cli\u003eCopper wire motor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShaft:\u003c\/strong\u003e stainless steel welded, 304 and 45#\u003c\/li\u003e\n\u003cli\u003eElectrophoresis pump body\u003c\/li\u003e\n\u003cli\u003eStainless steel impeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable length:\u003c\/strong\u003e 0.3m\u003c\/li\u003e\n\u003cli\u003eSupplied in a carton box\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43181261127751,"sku":"EWPPJ07501","price":17250.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EWPPJ07501_001062.jpg?v=1788987579"},{"product_id":"emtop-peripheral-water-pump-370w-0-5hp-35m-head-ewppv03701","title":"EMTOP Peripheral Water Pump 370W 0.5HP 35m Head EWPPV03701","description":"\u003cp\u003eSmall households and single tank installations rarely need a big pump, they need pressure. A peripheral pump delivers exactly that, and this EMTOP model at 370W, half a horsepower, reaches a maximum head of 35 metres from a compact and easily mounted body.\u003c\/p\u003e\u003cp\u003eFlow is 35 litres per minute with a maximum suction of 8 metres, through 1 inch by 1 inch connections. The impeller is brass, a hard-wearing choice for the close clearances a peripheral design runs, turning on a stainless welded 304 and 45# shaft, with an electrophoresis coated body and a copper wound motor. A 0.3 metre cable is fitted and the pump comes in a colour box, which makes it straightforward for a hardware shop to display.\u003c\/p\u003e\u003cp\u003eIt is well matched to boosting pressure for showers and instant heaters, feeding a house from a ground tank, filling an overhead tank, small garden watering and light workshop supply. Pair it with an automatic pump control for hands-free operation.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e peripheral pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 220-240V~50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated power:\u003c\/strong\u003e 370W (0.5HP)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum head:\u003c\/strong\u003e 35m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow:\u003c\/strong\u003e 35L\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum suction:\u003c\/strong\u003e 8m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe diameter:\u003c\/strong\u003e 1 inch x 1 inch\u003c\/li\u003e\n\u003cli\u003eCopper wire motor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShaft:\u003c\/strong\u003e stainless steel welded, 304 and 45#\u003c\/li\u003e\n\u003cli\u003eElectrophoresis pump body\u003c\/li\u003e\n\u003cli\u003eBrass impeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable length:\u003c\/strong\u003e 0.3m\u003c\/li\u003e\n\u003cli\u003eSupplied in a colour box\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43181261160519,"sku":"EWPPV03701","price":7150.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EWPPV03701_001066.jpg?v=1788987605"},{"product_id":"dayliff-ddw-750v-vortex-submersible-drainage-pump","title":"Dayliff DDW 750V Vortex Submersible Drainage Pump","description":"\u003cp\u003eSilt, leaves and fibrous debris defeat most small drainage pumps. The Dayliff DDW 750V answers that with a vortex impeller, which spins the liquid rather than passing it through a tight impeller passage, so solids travel through the pump instead of blocking it. It is the version of the DDW range to specify for dirty sumps, pond bottoms, drainage channels and post storm clean up.\u003c\/p\u003e\u003cp\u003eThe pump casing, suction base and impeller are moulded from high strength engineering plastic for corrosion resistance and easy handling. An external float switch is provided for automatic operation, and the union connected outlet accepts a threaded or hose connection. Ten metres of waterproof power cable are included. Power comes from an integral non-overloading induction motor built for continuous operation, with a thermal cut-out in the winding, connected directly to a single phase supply through a 10A fuse or MCB.\u003c\/p\u003e\u003cp\u003eCommon applications are site and basement dewatering, emptying silted tanks and ponds, fountain and water feature service, and general transfer of water that carries a solids load.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum particle size:\u003c\/strong\u003e 35mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 385mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 6kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpeller:\u003c\/strong\u003e vortex type for water with higher silt loads\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply:\u003c\/strong\u003e 1x240V, 2900rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure class:\u003c\/strong\u003e IPX8, insulation class F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum fluid temperature:\u003c\/strong\u003e +35°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum operating depth:\u003c\/strong\u003e 7m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable:\u003c\/strong\u003e 10m waterproof power cable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183210299463,"sku":"DAYLIFF-DDW-750V","price":10840.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_DDW_750V_000634.jpg?v=1789024139"},{"product_id":"dayliff-treated-water-ro-reverse-osmosis-treatment-unit","title":"Dayliff Treated Water RO Reverse Osmosis Treatment Unit","description":"\u003cp\u003eReverse osmosis strips dissolved salts from water by forcing it through a semi-permeable membrane under pressure, leaving treated water on one side and a concentrate stream running to drain. The Dayliff treated water RO unit brings membrane, pre-filtration, pump and controls together for sites where borehole or municipal water is too saline or too high in dissolved solids to drink.\u003c\/p\u003e\u003cp\u003eBottling operations, clinics, schools, hotels and households use plant of this kind. Sound pre-treatment and periodic membrane cleaning keep both output quality and recovery steady.\u003c\/p\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183214919751,"sku":"DAYLIFF-TREATED-WATER-RO","price":73650.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_TREATED_WATER_RO_000661.jpg?v=1789024189"},{"product_id":"dayliff-ddp-60e-econo-peripheral-water-pump-0-37kw","title":"Dayliff DDP 60E Econo Peripheral Water Pump 0.37kW","description":"\u003cp\u003ePeripheral pumps develop useful pressure from a small motor, and the Dayliff DDP 60E is the Econo build in that family, supplied in the familiar yellow colour. It is meant for small scale domestic and commercial water supply, where a modest flow at reasonable pressure is what the installation actually needs.\u003c\/p\u003e\u003cp\u003eThe pump body is cast iron with a brass impeller, and the specification includes copper windings and stainless steel housing inserts that keep the impeller turning freely. Close coupling to a TEFC electric motor designed for continuous operation keeps the unit compact, and a thermal cutout protects against electrical overload. The pump handles thin, clean, chemically non aggressive liquids without solid particles or fibres, so it should be kept off silty water.\u003c\/p\u003e\u003cp\u003eIt is used for boosting taps and showers, filling roof tanks from ground storage, and general small scale supply in houses, flats and shops.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 0.37 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent:\u003c\/strong\u003e 1.8 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInlet and outlet:\u003c\/strong\u003e 1 inch and 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 254 x 118 x 150 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.4 kg\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183217803335,"sku":"DAYLIFF-DDP-60-E-ECONO-YELLOW","price":5420.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_DDP_60_E_ECONO_YELLOW_000663.jpg?v=1789024208"},{"product_id":"schneeberg-hy152-float-switch-for-automatic-pump-control","title":"Schneeberg HY152 Float Switch for Automatic Pump Control","description":"\u003cp\u003eThe Schneeberg HY152 is a cable suspended float switch used to control a pump automatically from the water level in a tank, sump or reservoir. As the level moves the float tilts, and the switch inside it makes or breaks the control circuit.\u003c\/p\u003e\u003cp\u003eWired for filling, it stops the pump once a tank is full; wired for emptying, it starts the pump as a sump fills and cuts it off before the pump can run dry. Adjusting the free length of cable between the float and its anchor sets the switching differential.\u003c\/p\u003e","brand":"SCHNEEBERG","offers":[{"title":"Default Title","offer_id":43183218098247,"sku":"SCHNEEBERG-FLOAT-SWITCH-HY152","price":620.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/SCHNEEBERG_FLOAT_SWITCH_HY152_001144.jpg?v=1789024224"},{"product_id":"grundfos-cm-3-4a-horizontal-multistage-pump-0-5kw","title":"Grundfos CM 3-4A Horizontal Multistage Pump 0.5kW","description":"\u003cp\u003eThe Grundfos CM 3-4A is a horizontal multistage centrifugal pump rated at 0.5kW, built around a stack of impellers on a common shaft so that pressure is developed in stages rather than in a single step.\u003c\/p\u003e\u003cp\u003eDuties that suit it include pressure boosting, transfer from a storage tank, filtration and treatment feeds, irrigation lines and general supply where a steady head is wanted from a compact unit. It is normally installed above ground on a flooded suction or a short lift, and pairs with a pressure tank and switch or an electronic controller for automatic operation.\u003c\/p\u003e","brand":"GRUNDFOS","offers":[{"title":"Default Title","offer_id":43183218524231,"sku":"GRUNDFOS-CM-3TO4A-0-5KW","price":58880.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/GRUNDFOS_CM_3TO4A_0_5KW_001284.jpg?v=1789024239"},{"product_id":"dayliff-auto-pump-controller-for-domestic-water-pumps","title":"Dayliff Auto Pump Controller for Domestic Water Pumps","description":"\u003cp\u003eAn automatic pump controller starts and stops a pump in response to demand, so that a household or small commercial supply behaves like mains water rather than something a person has to switch on.\u003c\/p\u003e\u003cp\u003eThe Dayliff auto controller wires in between the supply and a single phase pump. Opening a tap drops the pressure in the delivery line, the controller calls the pump, and once the taps are closed it shuts the pump down again.\u003c\/p\u003e\u003cp\u003eIt suits booster and transfer sets on domestic and light commercial installations, particularly where a pressure tank on its own would leave the pump cycling too often.\u003c\/p\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183219441735,"sku":"DAYLIFF-AUTO-CONTROLLER","price":4440.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_AUTO_CONTROLLER_000605.jpg?v=1789024276"},{"product_id":"dayliff-brio-pump-controller-for-automatic-pump-switching","title":"Dayliff Brio Pump Controller for Automatic Pump Switching","description":"\u003cp\u003eBrio controllers are the pressure and flow switches most often fitted to Dayliff booster and transfer pumps to give fully automatic operation. The unit mounts on the pump discharge and carries the pump's own supply through it.\u003c\/p\u003e\u003cp\u003eWhen a tap or valve opens, pressure in the line falls and the controller energises the pump. When flow stops, it switches the pump off again. It also watches for the case where the pump is running but no water is moving, and cuts power rather than letting the pump work dry.\u003c\/p\u003e\u003cp\u003eTypical installations are domestic pressure sets, tank to house transfer and small irrigation supplies.\u003c\/p\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183219507271,"sku":"DAYLIFF-BRIO-CONTROLLER","price":11460.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_BRIO_CONTROLLER_000608.jpg?v=1789024276"},{"product_id":"dayliff-compact-ro-reverse-osmosis-water-purifier","title":"Dayliff Compact RO Reverse Osmosis Water Purifier","description":"\u003cp\u003eReverse osmosis takes dissolved salts out of water by forcing it through a semi permeable membrane under pressure, leaving sodium, calcium, chlorides and fluoride behind in a reject stream. It is the process used where water is safe in principle but too saline or too hard to drink comfortably.\u003c\/p\u003e\u003cp\u003eThe Dayliff Compact RO is a packaged unit for point of use and small point of entry duty, sized for a single outlet or a small distribution point rather than a whole building.\u003c\/p\u003e\u003cp\u003eIt suits homes, offices, clinics, salons and small food premises supplied from brackish boreholes.\u003c\/p\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183219540039,"sku":"DAYLIFF-COMPACT-RO","price":38800.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_COMPACT_RO_000609.jpg?v=1789024277"},{"product_id":"dayliff-d3sp1-14-submersible-borehole-pump-0-37kw","title":"Dayliff D3SP1-14 Submersible Borehole Pump 0.37kW","description":"\u003cp\u003eThe Dayliff D3SP1-14 is a compact three inch submersible multistage centrifugal pump built for small scale water supply from boreholes and wells. It is the lighter of the two D3SP1 models, which makes it the sensible pick for a modest household draw or a garden and stock supply where a narrow borehole rules out a larger diameter pump.\u003c\/p\u003e\u003cp\u003eImpellers and diffusers are engineering plastic, the inlet and outlet chambers brass, and the pump sleeve stainless steel. Behind the wet end sits a sealed two pole motor with copper windings, built principally from stainless steel. A separate control unit is included, carrying an isolator, run indicator light, thermal overload protection and a start capacitor, and it connects directly to mains power. Dayliff recommends adding an AVS or similar power protection controller where the mains supply fluctuates.\u003c\/p\u003e\u003cp\u003eDuties include domestic borehole and well supply, shallow abstraction on smallholdings, and filling storage tanks for gravity distribution.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 0.37 kW (0.55 HP)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum current:\u003c\/strong\u003e 3.3 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump diameter:\u003c\/strong\u003e 76 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 12 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 2900 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply:\u003c\/strong\u003e 1 x 240 V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure class:\u003c\/strong\u003e IP68, insulation class B\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable supplied:\u003c\/strong\u003e 20 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum working pressure:\u003c\/strong\u003e 35 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum borehole diameter:\u003c\/strong\u003e 100 mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183219605575,"sku":"DAYLIFF-D3SP1-14","price":33630.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_D3SP1_14_000610.jpg?v=1789024278"},{"product_id":"pedrollo-cpm158-hydrofresh-booster-pump-set-0-75kw","title":"Pedrollo CPm158 Hydrofresh Booster Pump Set 0.75kW","description":"\u003cp\u003eThe Pedrollo CPm158 Hydrofresh is a horizontal centrifugal pump supplied as a complete pressure set, with a horizontal diaphragm tank, pressure switch and gauge assembled on a common frame. System pressure is held between the switch settings, so the pump runs only when demand draws the system down.\u003c\/p\u003e\u003cp\u003eConstruction follows the rest of the CP range: a cast iron casing with a brass alloy closed impeller, driven by a close coupled Pedrollo brushless TEFC induction motor rated for continuous operation. The single phase motor carries a thermal cutout in the windings to protect against electrical and mechanical overload and connects directly to the mains through a fuse or MCB. These pumps are not self priming, so the set is installed on a flooded suction from a tank or on a short suction lift with a foot valve.\u003c\/p\u003e\u003cp\u003eDomestic and small commercial boosting is the main application — tank fed house supplies, flats, guest houses and workshops — along with water transfer and light agricultural duty on thin, clean, chemically non-aggressive liquids free of solids and fibres.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor power:\u003c\/strong\u003e 0.75 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum operating current:\u003c\/strong\u003e 5.8 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 1 x 240 V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 2900 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInlet and outlet:\u003c\/strong\u003e 1 inch and 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure tank:\u003c\/strong\u003e 24 litre horizontal diaphragm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump start pressure:\u003c\/strong\u003e 1.8 bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump stop pressure:\u003c\/strong\u003e 3.2 bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 550 x 225 x 600 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 20 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure and insulation class:\u003c\/strong\u003e IP44 and class F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum fluid temperature:\u003c\/strong\u003e +90 degrees C\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PEDROLLO","offers":[{"title":"Default Title","offer_id":43183222652999,"sku":"PEDROLLO-CPM158-HYDROFRESH","price":59860.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/PEDROLLO_CPM158_HYDROFRESH_002178.jpg?v=1789024396"},{"product_id":"dayliff-dlv7p-petrol-engine-for-engine-driven-pumps","title":"Dayliff DLV7P Petrol Engine for Engine Driven Pumps","description":"\u003cp\u003eThe Dayliff DLV7P is a petrol engine supplied as the power unit for engine driven equipment. Engines of this type are bought either to replace a worn or damaged engine on an existing pump set, keeping the pump end and frame in service, or as a spare held against downtime in the middle of an irrigation or dewatering season.\u003c\/p\u003e\u003cp\u003ePump dealers, borehole contractors, farmers and hire operators keep petrol engines on hand for exactly this reason, since an engine change is usually quicker and cheaper than replacing a complete machine. Matching the engine to the pump mounting, shaft and duty before ordering is advised.\u003c\/p\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183223013447,"sku":"DAYLIFF-DLV7P-ENGINE","price":16750.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_DLV7P_ENGINE_000641.jpg?v=1789024399"},{"product_id":"pedrollo-easy-press-electronic-pump-pressure-controller","title":"Pedrollo Easy Press Electronic Pump Pressure Controller","description":"\u003cp\u003ePedrollo Easy Press is an integrated electronic pump controller that provides automatic pressurised water supply in place of a conventional pressure switch and pressure tank arrangement. It starts the pump when system pressure falls below the preset value and stops it once demand drops below the cut-out flow rate.\u003c\/p\u003e\u003cp\u003eBuilt into the unit are LED status indicators for monitoring pump operation, an integral air chamber that evens out the supply, dry running protection with an automatic restart facility, and controlled cycling so that a small leak in the system does not chatter the pump on and off.\u003c\/p\u003e\u003cp\u003eHouse and small commercial boosting sets, tank fed supplies and borehole installations use controllers of this kind, fitted in line on the pump delivery. Doing so simplifies the installation, taking the tank and switch out of the pipework and cutting down the fittings a plumber has to make up.\u003c\/p\u003e","brand":"PEDROLLO","offers":[{"title":"Default Title","offer_id":43183223734343,"sku":"PEDROLLO-EASY-PRESS","price":16880.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/PEDROLLO_EASY_PRESS_002181.jpg?v=1789024411"},{"product_id":"pedrollo-easysmall-2-automatic-pump-pressure-controller","title":"Pedrollo Easysmall 2 Automatic Pump Pressure Controller","description":"\u003cp\u003eEasysmall 2 is a Pedrollo pump controller that takes over the work of a pressure switch and expansion tank, starting the pump when pressure drops at a tap and stopping it once flow ceases.\u003c\/p\u003e\u003cp\u003eFitting one in line on the pump delivery keeps a boosted supply automatic without the space, fittings and pre-charge checks that a tank installation demands. Small booster sets in homes, shops and guest houses are its usual home. Dry running protection is a normal part of controllers in this class, guarding the pump when a tank or well runs empty.\u003c\/p\u003e","brand":"PEDROLLO","offers":[{"title":"Default Title","offer_id":43183224291399,"sku":"PEDROLLO-EASYSMALL-2","price":10470.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/PEDROLLO_EASYSMALL_2_002182.jpg?v=1789024426"},{"product_id":"pedrollo-pkm60-peripheral-impeller-booster-pump-0-5hp","title":"Pedrollo PKm60 Peripheral Impeller Booster Pump 0.5HP","description":"\u003cp\u003eThe Pedrollo PKm range are peripheral impeller booster pumps used for water transfer and pressure boosting in domestic and small scale installations, and the PKm60 sits at the compact end of that family. A peripheral impeller develops a relatively high head from a small body, which suits supplies where pressure matters more than sheer volume.\u003c\/p\u003e\u003cp\u003eIts body is cast iron, with a brass insert set into the front housing to improve starting behaviour and protect against jamming, and the impeller is brass. An anti-vibration arrangement between shaft and impeller keeps running noise down, and a special paint finish resists environmental corrosion. Drive comes from a close coupled TEFC brushless induction motor made for continuous operation, with a thermal relay in the windings guarding against electrical and mechanical overload.\u003c\/p\u003e\u003cp\u003eHousehold and small commercial boosting, tank to tap supply, garden lines and light irrigation are the typical duties. The pump may be run manually or automatically, using either the Pedrollo Easysmall controller or a pressure tank and switch.\u003c\/p\u003e","brand":"PEDROLLO","offers":[{"title":"Default Title","offer_id":43183224782919,"sku":"PEDROLLO-PKM60-0-5HP","price":9180.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/PEDROLLO_PKM60_0_5HP_002185.jpg?v=1789024443"},{"product_id":"pedrollo-pkm60-hydrofresh-booster-set-with-24l-tank","title":"Pedrollo PKm60 Hydrofresh Booster Set with 24L Tank","description":"\u003cp\u003eSupplied as a ready assembled pressure set, the Pedrollo PKm60 Hydrofresh combines a PKm60 peripheral impeller pump with a horizontal diaphragm tank, pressure switch and gauge on one frame. The pump cuts in as pressure falls and cuts out once the tank is recharged, so a plumber has only to connect suction, delivery and power.\u003c\/p\u003e\u003cp\u003eThe pump body is cast iron, with a brass insert in the front housing for better starting and protection against jamming, and a brass impeller. An anti-vibration arrangement between shaft and impeller keeps noise down, while the paint finish resists environmental corrosion. The close coupled TEFC brushless induction motor is rated for continuous operation and carries a thermal relay in the windings against electrical and mechanical overload; it connects to the mains through a fuse or MCB.\u003c\/p\u003e\u003cp\u003eTank fed house supplies, guest houses, shops and workshops are the usual applications, wherever gravity head is too low to give sensible pressure at taps, showers and appliances.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor power:\u003c\/strong\u003e 0.37 kW (0.5 HP)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum operating current:\u003c\/strong\u003e 2.4 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 1 x 240 V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 2900 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInlet and outlet:\u003c\/strong\u003e 1 inch and 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure tank:\u003c\/strong\u003e 24 litre horizontal diaphragm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump start pressure:\u003c\/strong\u003e 1.4 bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump stop pressure:\u003c\/strong\u003e 2.8 bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x H x H1 x W):\u003c\/strong\u003e 535 x 500 x 346 x 255 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 14 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure and insulation class:\u003c\/strong\u003e IPX4 and class F\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PEDROLLO","offers":[{"title":"Default Title","offer_id":43183225569351,"sku":"PEDROLLO-PKM60-HYDROFRESH","price":42620.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/PEDROLLO_PKM60_HYDROFRESH_002186.jpg?v=1789024463"},{"product_id":"pedrollo-pkm65-peripheral-impeller-booster-pump-0-75hp","title":"Pedrollo PKm65 Peripheral Impeller Booster Pump 0.75HP","description":"\u003cp\u003eWater transfer and pressure boosting in domestic and small scale installations is what the Pedrollo PKm family is made for, and the PKm65 is one step up the range. Peripheral impeller pumps of this kind produce a comparatively high head from a small casing, so they suit supplies where pressure at the tap is the limiting factor rather than volume.\u003c\/p\u003e\u003cp\u003eCast iron forms the pump body, with a brass insert set into the front housing that improves starting performance and protects against jamming; the impeller itself is brass. Noise is held down by an anti-vibration arrangement between shaft and impeller, and the paint finish is chosen to resist environmental corrosion. A close coupled TEFC brushless induction motor rated for continuous operation drives the pump, protected by a thermal relay in the windings.\u003c\/p\u003e\u003cp\u003eHomes, guest houses, workshops and gardens are the common settings, either boosting a tank fed supply or transferring water between storage. Control may be manual, or automatic through the Pedrollo Easysmall controller or a pressure tank and switch.\u003c\/p\u003e","brand":"PEDROLLO","offers":[{"title":"Default Title","offer_id":43183226355783,"sku":"PEDROLLO-PKM65-0-75HP","price":20940.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/PEDROLLO_PKM65_0_75HP_002187.jpg?v=1789024480"},{"product_id":"dayliff-d3sp1-27-submersible-borehole-pump-0-75kw","title":"Dayliff D3SP1-27 Submersible Borehole Pump 0.75kW","description":"\u003cp\u003eHouseholds on a borehole that needs a little more lift than the smallest pump will give are the market for the Dayliff D3SP1-27. It is the higher rated of the two D3SP1 models, a slim three inch submersible multistage centrifugal pump intended for small scale supplies from boreholes and wells.\u003c\/p\u003e\u003cp\u003eWet end construction is engineering plastic impellers and diffusers with brass inlet and outlet chambers inside a stainless steel pump sleeve. The pump is coupled to a sealed two pole motor with copper windings, itself built mainly from stainless steel. Cable and a separate control unit are supplied with every pump, the control unit carrying an isolator, run indicator light, thermal overload protection and a start capacitor for direct connection to mains power. Where voltage swings are a known problem, Dayliff advises fitting an AVS or similar power protection controller as well.\u003c\/p\u003e\u003cp\u003eIt is used for domestic and small institutional borehole supply, well abstraction on farms, and tank filling ahead of gravity distribution.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 0.75 kW (1 HP)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum current:\u003c\/strong\u003e 6.3 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 14 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 2900 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply:\u003c\/strong\u003e 1 x 240 V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure class:\u003c\/strong\u003e IP68, insulation class B\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable supplied:\u003c\/strong\u003e 20 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum working pressure:\u003c\/strong\u003e 35 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum borehole diameter:\u003c\/strong\u003e 100 mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183227142215,"sku":"DAYLIFF-D3SP1-27","price":37440.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_D3SP1_27_000611.jpg?v=1789024508"},{"product_id":"dayliff-db-2s30-water-pump-for-water-supply-duties","title":"Dayliff DB 2S30 Water Pump for Water Supply Duties","description":"\u003cp\u003eThe Dayliff DB 2S30 is stocked under the factory code that identifies it within the Dayliff pump range. Like the rest of that range it is intended for water supply duty, lifting water from a source and delivering it to storage or on to a distribution point on a domestic, agricultural or light commercial site.\u003c\/p\u003e\u003cp\u003eNo performance figures are quoted on this page for this code. Anyone matching the pump to a known duty should check the head, flow, motor rating and connection sizes against the current Dayliff datasheet or the pump's own model plate before ordering.\u003c\/p\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183227207751,"sku":"DAYLIFF-DB-2S30","price":45200.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_DB_2S30_000612.jpg?v=1789024508"},{"product_id":"dayliff-dc-50e-econo-self-priming-engine-pump","title":"Dayliff DC 50E Econo Self Priming Engine Pump","description":"\u003cp\u003eDayliff's DC range covers self priming engine pumps of fully portable design, built for irrigation, dewatering and general water transfer where there is no mains power at the water's edge. The DC 50E sits within that range and carries the E suffix Dayliff uses for its Econo specification, which is assembled from different components and is recommended for lighter duties and shorter operating periods rather than continuous daily pumping.\u003c\/p\u003e\u003cp\u003eAcross the range the pump body and impellers are cast from high grade aluminium, and the impeller is of open type so that lightly silted water passes through without choking the pump. A sturdy frame carries the unit and shields the engine, and quick couple hose connectors and a suction strainer are supplied with the pump. Power comes from an air cooled single cylinder overhead valve engine with transistorised ignition and an oil alert.\u003c\/p\u003e\u003cp\u003eTypical work is furrow and sprinkler irrigation on smallholdings, emptying flooded excavations, filling site and farm tanks, and moving water between storage points.\u003c\/p\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183227240519,"sku":"DAYLIFF-DC-50E","price":22300.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_DC_50E_000613.jpg?v=1789024509"},{"product_id":"dayliff-dc-50p-portable-self-priming-engine-pump","title":"Dayliff DC 50P Portable Self Priming Engine Pump","description":"\u003cp\u003eWhere there is no power at the abstraction point, an engine pump does the work, and the Dayliff DC range is built for exactly that. The DC 50P is supplied from within this family of self priming, high flow, fully portable pumps designed around irrigation, dewatering and general transfer duties.\u003c\/p\u003e\u003cp\u003eEvery pump in the range runs an open impeller, so lightly silted water can be handled without the blockages a closed impeller would suffer. Body and impellers are cast from high grade aluminium, and the whole unit sits inside a carrying and protection frame. Quick couple hose connectors and a suction strainer come with the pump. Power is an air cooled single cylinder overhead valve engine with transistorised ignition and built in oil alert. Dayliff notes that running any of these engines at full governed speed should be kept to short spells, with the throttle eased back for extended duty and pump output falling accordingly.\u003c\/p\u003e\u003cp\u003eIt suits sprinkler and furrow irrigation, draining trenches and excavations, and filling storage tanks off grid.\u003c\/p\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183227306055,"sku":"DAYLIFF-DC-50P","price":26110.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_DC_50P_000614.jpg?v=1789024510"},{"product_id":"dayliff-dc-80p-portable-self-priming-engine-pump","title":"Dayliff DC 80P Portable Self Priming Engine Pump","description":"\u003cp\u003eVolume rather than pressure is what the Dayliff DC range is built to deliver, and the DC 80P is supplied from within that family of self priming, fully portable engine pumps. The range is aimed at irrigation, dewatering and general water movement on farms, estates and construction sites where mains power does not reach the source.\u003c\/p\u003e\u003cp\u003eConstruction follows the family pattern: high grade cast aluminium body and impellers, an open impeller that tolerates lightly silted water, and a sturdy frame that both carries the pump and protects the engine. Quick couple hose connectors and a suction strainer are included. The engine is an air cooled single cylinder overhead valve design with transistorised ignition and built in oil alert. For long spells of work Dayliff advises winding the throttle back from maximum governed speed, trading some output for engine life.\u003c\/p\u003e\u003cp\u003eRegular duties are field and orchard irrigation, clearing water out of excavations and drains, and bulk transfer between tanks and reservoirs.\u003c\/p\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183227338823,"sku":"DAYLIFF-DC-80P","price":31900.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_DC_80P_000615.jpg?v=1789024510"},{"product_id":"dayliff-dcx1-50p-high-pressure-petrol-engine-pump","title":"Dayliff DCX1 50P High Pressure Petrol Engine Pump","description":"\u003cp\u003eHead, not just flow, is what the Dayliff DCX range is designed around. These portable pumps use a self priming closed impeller centrifugal layout aimed at high head water transfer, fire fighting and irrigation, and the DCX1 50P is the petrol engined, single impeller build within it.\u003c\/p\u003e\u003cp\u003ePumps in the range are fitted with either one or two impellers, giving medium or high pressure performance, and the body and impellers are cast from high grade aluminium. Quick couple suction and inlet connectors and a strainer are supplied, and the pump sits in a sturdy carrying and protection frame. The petrol option is an air cooled single cylinder overhead valve engine with transistorised ignition, built in oil alert and recoil start. Dayliff notes that published performance curves assume the governor set for maximum rated power; for extended duty the throttle should be reduced to about three quarters, with output reduced to match.\u003c\/p\u003e\u003cp\u003eApplications include pumping uphill to elevated tanks, estate fire fighting reserves, sprinkler irrigation that needs pressure at the nozzle, and long delivery runs.\u003c\/p\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183227404359,"sku":"DAYLIFF-DCX1-50P","price":42490.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_DCX1_50P_000616.jpg?v=1789024511"},{"product_id":"dayliff-dq-15f-circulator-pump-with-flow-switch-120w","title":"Dayliff DQ 15F Circulator Pump with Flow Switch 120W","description":"\u003cp\u003eWeak shower pressure and slow hot water delivery are the problems the Dayliff DQ 15F is bought to solve. It is a single speed circulator pump with a built-in flow switch, so the pump starts whenever there is demand at the outlet and stops when the tap closes, without a separate pressure switch or controller. Alongside shower boosting it is used for hot water circulation in heating, hot water, cooling and air conditioning systems, whether open or closed, and for circulation in solar hot water installations.\u003c\/p\u003e\u003cp\u003eThe pump housing is cast iron, the impeller is glass fibre reinforced polypropylene, and the rotor is stainless steel running in a ceramic bearing support, a combination chosen for long service in hot water. Female threaded BSP union connections are supplied, which makes fitting into existing pipework straightforward. The integral asynchronous squirrel cage motor includes a capacitor and overload protection and connects directly to the mains through a 5A fuse or MCB. Pumps must be installed with the rotor shaft horizontal.\u003c\/p\u003e\u003cp\u003ePlumbers fit the DQ 15F in houses, flats, guest houses and small hotels, on shower lines, hot water loops and solar systems.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 120W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent:\u003c\/strong\u003e 0.55A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInlet and outlet:\u003c\/strong\u003e ¾ inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 160mm length, 105.5mm height, 144mm width\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply:\u003c\/strong\u003e 1x240V, 2900rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure class:\u003c\/strong\u003e IP54, insulation class F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum operating pressure:\u003c\/strong\u003e 6 bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFluid temperature range:\u003c\/strong\u003e -10°C to 110°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmbient temperature range:\u003c\/strong\u003e 10°C to 50°C\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183229042759,"sku":"DAYLIFF-DQ15F","price":11700.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_DQ15F_003675.jpg?v=1789024568"},{"product_id":"dayliff-ds-2-9-borehole-pump-with-motor-and-control-box","title":"Dayliff DS 2\/9 Borehole Pump with Motor and Control Box","description":"\u003cp\u003eSupplied complete with its capacitor start winding motor and matching control box, the Dayliff DS 2\/9 is a submersible pump from the DS 2 series, designed specifically for borehole water supply. The 2 series is the narrow, low flow end of the DS range, suited to domestic and small institutional boreholes where a steady daily supply matters more than volume.\u003c\/p\u003e\u003cp\u003eThe pump is of multistage centrifugal impeller design, and its parts are made from stainless steel with water lubricated rubber bearings, a construction chosen to resist the corrosion and wear of continuous immersion. A submersible motor sits beneath the pump, with suction taken through a strainer between the two, and the motor itself is a sealed, liquid cooled, oil filled asynchronous squirrel cage type in stainless steel. Because this is a single phase set, the purpose designed control box is included; it houses the starting and protection components and connects to the mains supply. A Dayliff electronic pump controller is recommended alongside it for fuller protection against dry running, motor overload and irregular power supply.\u003c\/p\u003e\u003cp\u003eInstallers specify pumps of this series for homes, schools, clinics, guest houses and smallholdings drawing from a drilled borehole or deep well.\u003c\/p\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183229108295,"sku":"DAYLIFF-DS-2S9-CSW-MOTOR-CNTRL-BOX","price":58750.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_DS_2S9_CSW_MOTOR_CNTRL_BOX_000642.jpg?v=1789024569"},{"product_id":"dayliff-ds-5-8-borehole-pump-with-motor-and-control-box","title":"Dayliff DS 5\/8 Borehole Pump with Motor and Control Box","description":"\u003cp\u003eBoreholes serving a household, a farm or a small institution are the work the Dayliff DS 5\/8 is built for. It comes as a set: the submersible pump, its capacitor start winding motor and the purpose designed control box that a single phase installation requires. The 5 series carries a higher flow than the 2 series at a given head, which suits properties with storage tanks to fill or several draw off points.\u003c\/p\u003e\u003cp\u003eConstruction is multistage centrifugal, with all pump parts in stainless steel and water lubricated rubber bearings. The motor mounts beneath the pump and is a sealed, liquid cooled asynchronous squirrel cage design, also in stainless steel, with suction drawn through a strainer between motor and pump. The control box provides the starting and protective components and wires directly to the mains. For fuller protection, Dayliff recommends adding an electronic pump controller, which covers wireless low level detection, motor overload and irregular power supply.\u003c\/p\u003e\u003cp\u003eBorehole drillers, plumbers and farm managers install pumps of this series for domestic supply, livestock watering, irrigation storage and small commercial premises.\u003c\/p\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183229173831,"sku":"DAYLIFF-DS-5S8-CSW-MOTOR-CNTRL-BOX","price":62200.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_DS_5S8_CSW_MOTOR_CNTRL_BOX_000643.jpg?v=1789024570"},{"product_id":"dayliff-dsd-0-37kw-submersible-borehole-water-pump","title":"Dayliff DSD 0.37kW Submersible Borehole Water Pump","description":"\u003cp\u003eThis is a Dayliff DSD submersible pump rated at 0.37kW, the smallest motor size in the DSD family. The DSD range is a multistage centrifugal design made for domestic and small scale water supply drawn from wells and boreholes, lowered into the water on a rising main and left permanently submerged.\u003c\/p\u003e\u003cp\u003eA pump at this rating suits shallower installations and modest daily demand, such as a household drawing to a storage tank, a kitchen garden or a small livestock trough. Single phase pumps of this type are operated through a control box, which provides starting and protection against overload and dry running.\u003c\/p\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183229206599,"sku":"DAYLIFF-DSD-0-37-KW","price":25870.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_DSD_0_37_KW_000644.jpg?v=1789024571"},{"product_id":"dayliff-dsd-0-75kw-submersible-borehole-water-pump","title":"Dayliff DSD 0.75kW Submersible Borehole Water Pump","description":"\u003cp\u003eRated at 0.75kW, this Dayliff DSD submersible pump sits in the middle of the smaller DSD sizes. The DSD range uses a multistage centrifugal design and is made for domestic and small scale water supply from wells and boreholes, running fully submerged below the water level on a rising main.\u003c\/p\u003e\u003cp\u003eHomes with a storage tank to fill, guest houses, small farms and market gardens are the usual buyers at this rating, where the extra power over the smallest models is needed for a deeper setting or a longer delivery run. A control box provides starting and protection for single phase installations.\u003c\/p\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183229239367,"sku":"DAYLIFF-DSD-0-75-KW","price":30790.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_DSD_0_75_KW_000645.jpg?v=1789024571"}],"url":"https:\/\/ahihqtraders.com\/collections\/pumps-water.oembed","provider":"AHIHQ Traders","version":"1.0","type":"link"}