{"title":"Tools \u0026 Equipment","description":"\u003cp\u003eTools and equipment stocked by AHIHQ Traders, including hand tools, power tools, garden tools, measuring tools, water pumps, generators and safety products.\u003c\/p\u003e","products":[{"product_id":"emtop-demolition-breaker-1700w-45j-hex-edbrh1701","title":"EMTOP Demolition Breaker 1700W 45J Hex EDBRH1701","description":"\u003cp\u003eBreaking concrete is a question of weight and joules, and the EDBRH1701 brings 16kg of tool to bear on 45 joules per blow. It is aimed at demolition gangs, drainage crews and contractors taking up slabs, screeds and blinding where a jackhammer is the right tool but a compressor is not available.\u003c\/p\u003e\u003cp\u003eThe motor draws 1700W from a 220-240V supply and drives the chisel at 1400 blows per minute, a steady rate that keeps material breaking rather than compacting. A hex chuck system takes standard hex steels and changes them quickly on site. Two chisels are supplied to start with, along with a set of spare carbon brushes so a worn pair does not put the tool out of service. It ships in a BMC case.\u003c\/p\u003e\u003cp\u003eTypical use covers slab and floor breaking, removing plinths and kerbs, taking out blockwork and brick piers, trenching through hardstanding for services, and stripping thick screed and tile beds before a new floor is laid.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eVoltage: 220-240V~50\/60Hz\u003c\/li\u003e\n\u003cli\u003eInput power: 1700W\u003c\/li\u003e\n\u003cli\u003eImpact rate: 1400bpm\u003c\/li\u003e\n\u003cli\u003eImpact force: 45J\u003c\/li\u003e\n\u003cli\u003eHex chuck system\u003c\/li\u003e\n\u003cli\u003eWeight: 16kg\u003c\/li\u003e\n\u003cli\u003eIncludes 2 chisels\u003c\/li\u003e\n\u003cli\u003eIncludes 1 set of spare carbon brushes\u003c\/li\u003e\n\u003cli\u003eSupplied in a BMC case\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180904611911,"sku":"EDBRH1701","price":36090.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EDBRH1701_000829.jpg?v=1788978866"},{"product_id":"emtop-ball-pein-hammer-16oz-450g-forged-ehambh1601","title":"EMTOP Ball Pein Hammer 16oz 450g Forged EHAMBH1601","description":"\u003cp\u003eMetalworkers reach for a ball pein rather than a claw hammer because the rounded pein shapes and peens metal where a flat face would only flatten it. The EMTOP EHAMBH1601 is a 16oz (450g) hammer, the general-purpose weight for a fitter, a welder, a panel beater or an engineering workshop bench.\u003c\/p\u003e\n\u003cp\u003eIts head is drop-forged from 45# carbon steel and heat treated so the striking face resists spreading and the body stays tough under repeated blows. The handle uses a fibreglass core in a shaped design, giving a hammer that damps the shock of each strike and will not shrink or split as a wooden handle can in dry conditions.\u003c\/p\u003e\n\u003cp\u003eSuited to riveting and peening, setting punches and chisels, straightening and shaping sheet and bar, driving and freeing pins, machinery assembly and vehicle repair, and any bench work where controlled metal-to-metal striking is needed. At 450g it is heavy enough to set a rivet in a few blows yet light enough for accurate work with a centre punch, which is the balance most fitters look for in a single general-purpose hammer.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e EHAMBH1601\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 16oz \/ 450g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead:\u003c\/strong\u003e drop-forged, heat treated, 45# carbon steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle:\u003c\/strong\u003e fibreglass, shaped design\u003c\/li\u003e\n\u003cli\u003eSupplied with a label\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180905005127,"sku":"EHAMBH1601","price":530.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EHAMBH1601_000878.jpg?v=1788978869"},{"product_id":"emtop-4-inch-deep-well-pump-370w-0-5hp-48m-head-ewppd03701","title":"EMTOP 4 Inch Deep Well Pump 370W 0.5HP 48m Head EWPPD03701","description":"\u003cp\u003eHouseholds and smallholdings drawing from a borehole need a pump sized to the depth of water, not simply the biggest available. This EMTOP 4 inch deep well pump is the entry point of the range at 370W, half a horsepower, lifting to a maximum head of 48 metres.\u003c\/p\u003e\u003cp\u003eWater passes through a six stage impeller, each stage adding pressure so the pump can push a steady flow up a long column rather than relying on one wheel. Maximum flow is 6.0 cubic metres per hour through a 1-1\/4 inch discharge. The motor is wound with copper wire and the pump body is stainless steel, a combination chosen for continuous immersion in a 4 inch bore. Twenty metres of cable are fitted, so the wellhead connection can be made without an early joint. The control box is not included.\u003c\/p\u003e\u003cp\u003eUse it for domestic boreholes, small farm and irrigation supply, livestock watering, school and clinic water systems, and topping up storage tanks.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 220-240V~50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated power:\u003c\/strong\u003e 370W (0.5HP)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum head:\u003c\/strong\u003e 48m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow:\u003c\/strong\u003e 6.0 cubic metres per hour\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe diameter:\u003c\/strong\u003e 1-1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWell pump body:\u003c\/strong\u003e 4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpeller:\u003c\/strong\u003e 6 stage\u003c\/li\u003e\n\u003cli\u003eCopper wire motor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump body:\u003c\/strong\u003e stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable length:\u003c\/strong\u003e 20m\u003c\/li\u003e\n\u003cli\u003eControl box not included\u003c\/li\u003e\n\u003cli\u003eSupplied in a carton box\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180909592647,"sku":"EWPPD03701","price":16880.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EWPPD03701_001057.jpg?v=1788978936"},{"product_id":"emtop-4-inch-deep-well-pump-550w-0-75hp-64m-head-ewppd05501","title":"EMTOP 4 Inch Deep Well Pump 550W 0.75HP 64m Head EWPPD05501","description":"\u003cp\u003eWhere the standing water level sits deeper than a half horsepower pump can comfortably serve, this EMTOP 4 inch deep well pump steps in at 550W, three quarters of a horsepower, with a maximum head of 64 metres. It is a practical middle size for domestic and light agricultural boreholes.\u003c\/p\u003e\u003cp\u003eEight impeller stages build the pressure needed for that lift while holding a maximum flow of 6.0 cubic metres per hour, delivered through a 1-1\/4 inch pipe connection. The stainless steel pump body resists corrosion during permanent immersion, and the copper wound motor is built for the long running hours that tank filling demands. A 20 metre cable is fitted from the factory. The control box is supplied separately.\u003c\/p\u003e\u003cp\u003eTypical installations include homestead boreholes, guest houses and rentals, small scale irrigation, dairy and poultry units, and institutional water supply where a storage tank is filled once or twice a day. Match the pump to the bore depth and yield before installation.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 220-240V~50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated power:\u003c\/strong\u003e 550W (0.75HP)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum head:\u003c\/strong\u003e 64m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow:\u003c\/strong\u003e 6.0 cubic metres per hour\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe diameter:\u003c\/strong\u003e 1-1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWell pump body:\u003c\/strong\u003e 4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpeller:\u003c\/strong\u003e 8 stage\u003c\/li\u003e\n\u003cli\u003eCopper wire motor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump body:\u003c\/strong\u003e stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable length:\u003c\/strong\u003e 20m\u003c\/li\u003e\n\u003cli\u003eControl box not included\u003c\/li\u003e\n\u003cli\u003eSupplied in a carton box\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180911263815,"sku":"EWPPD05501","price":18510.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EWPPD05501_001058.jpg?v=1788978962"},{"product_id":"emtop-mini-claw-hammer-8oz-220g-fibreglass-ehamch0802","title":"EMTOP Mini Claw Hammer 8oz 220g Fibreglass EHAMCH0802","description":"\u003cp\u003eAn 8oz claw hammer for finishing work, cabinet fixing, picture rails and any job where a full framing hammer would be heavy-handed. Its head follows the profile of a standard 8oz claw hammer, so the striking face and claw behave the way a joiner expects.\u003c\/p\u003e\u003cp\u003eThe head is drop forged from 45# carbon steel and heat treated, giving a face that resists mushrooming and a claw that keeps its grip on nail shanks. A fibreglass handle absorbs shock better than solid steel and stays stable in the heat and humidity found across the region.\u003c\/p\u003e\u003cp\u003eCarpenters, shopfitters, upholsterers and household toolboxes all have a place for a hammer this size. Use it for panel pins, tacks, small nails, dowels and light assembly, and for drawing nails without marking the surrounding timber. Strike squarely with the centre of the face, as glancing blows bend nails and leave crescent marks across finished timber. Store the hammer dry so the head stays free of rust.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eWeight: 8oz (220g)\u003c\/li\u003e\n\u003cli\u003eHammer head profiled like a standard 8oz claw hammer\u003c\/li\u003e\n\u003cli\u003eDrop-forged hammer head\u003c\/li\u003e\n\u003cli\u003eHeat treated 45# carbon steel\u003c\/li\u003e\n\u003cli\u003eFibreglass handle\u003c\/li\u003e\n\u003cli\u003eSupplied on a paper card\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180916572231,"sku":"EHAMCH0802","price":390.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EHAMCH0802_000879.jpg?v=1788979021"},{"product_id":"emtop-claw-hammer-16oz-450g-fibreglass-ehamch1601","title":"EMTOP Claw Hammer 16oz 450g Fibreglass EHAMCH1601","description":"\u003cp\u003eDriving nails and pulling them out again is the daily work of a carpenter, and the 16oz claw hammer is the size that does both without tiring the arm. The EMTOP EHAMCH1601 weighs 450g and suits carpenters, formwork crews, roofers and any household toolbox.\u003c\/p\u003e\n\u003cp\u003eThe head is drop-forged from 45# carbon steel and heat treated, so the face stays flat under repeated blows and the claw keeps its shape when levering out stubborn nails. An anti-slip function is built into the grip, which matters when hands are damp or dusty on site. The handle carries a fibreglass core in a shaped design, damping the shock of a hard strike and staying dimensionally stable in heat and rain where a timber handle would loosen.\u003c\/p\u003e\n\u003cp\u003eUse it for framing and formwork, fixing battens and roofing timber, dismantling crates and shuttering, general joinery, and the household jobs of hanging, fixing and pulling nails.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e EHAMCH1601\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 16oz \/ 450g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead:\u003c\/strong\u003e drop-forged, heat treated, 45# carbon steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle:\u003c\/strong\u003e fibreglass, shaped design\u003c\/li\u003e\n\u003cli\u003eAnti-slip function\u003c\/li\u003e\n\u003cli\u003eSupplied with a label\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180918046791,"sku":"EHAMCH1601","price":570.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EHAMCH1601_000880.jpg?v=1788979041"},{"product_id":"emtop-rubber-hammer-16oz-450g-fibreglass-ehamrh1601","title":"EMTOP Rubber Hammer 16oz 450g Fibreglass EHAMRH1601","description":"\u003cp\u003eRubber-headed hammer at 16oz (450g), used where a steel face would bruise or dent the work. Tilers, fitters, panel workers and assembly crews use a mallet of this weight to tap components home, seat joints and persuade parts into alignment.\u003c\/p\u003e\u003cp\u003eThe head is rubber with non-marring plastic faces, so it protects the workpiece surface while still delivering a firm blow, and it is non-spark in use. A fibreglass handle sits behind the head, damping the return shock and keeping the tool balanced through a long session of repetitive tapping.\u003c\/p\u003e\u003cp\u003eTypical work includes bedding floor and wall tiles, closing timber joints, fitting hub caps and trim, tapping paving into a sand bed and knocking together flat-pack carcasses. It also has a place in sheet metal work where a dressing blow must not leave a mark. Move the work with several controlled taps rather than one heavy blow, because a rubber head returns much of the energy and can bounce a part out of position.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eWeight: 16oz (450g)\u003c\/li\u003e\n\u003cli\u003eRubber hammer head\u003c\/li\u003e\n\u003cli\u003eNon-spark\u003c\/li\u003e\n\u003cli\u003eNon-marring plastic faces that protect the workpiece surface\u003c\/li\u003e\n\u003cli\u003eFibreglass handle\u003c\/li\u003e\n\u003cli\u003eSupplied with a label\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180918636615,"sku":"EHAMRH1601","price":580.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EHAMRH1601_000881.jpg?v=1788979059"},{"product_id":"emtop-fibreglass-tape-measure-long-distance-emtp85001","title":"EMTOP Fibreglass Tape Measure Long Distance EMTP85001","description":"\u003cp\u003eFor setting out, a wind-up fibreglass tape is easier to handle than a rigid rule. The blade is light, lies flat over rough ground and returns to the reel on a folding crank handle, so one person can run a line and wind it back quickly.\u003c\/p\u003e\u003cp\u003eBuilders, landscapers and surveyors use one to measure plots, mark out drainage and cable trenches, check diagonals for square and lay out large slabs. Wipe mud from the blade as it comes back in, and avoid dragging it across sharp edges.\u003c\/p\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180919062599,"sku":"EMTP85001","price":1510.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EMTP85001_000964.jpg?v=1788979061"},{"product_id":"emtop-magnetic-welding-holder-for-fabrication-emwh6002","title":"EMTOP Magnetic Welding Holder for Fabrication EMWH6002","description":"\u003cp\u003eMagnetic holders act as a second pair of hands at the bench. Clamped onto two pieces of steel, the magnet holds the joint at a set angle while the welder tacks it, which frees up a hand and keeps the assembly true instead of drifting as it is spot-welded.\u003c\/p\u003e\u003cp\u003eFabricators use them for frames, gates, grilles, brackets, ducting and general repair work, and they are just as useful for holding a part steady while it is marked out or drilled. Wipe the faces clean of spatter and filings so they seat flat on the work.\u003c\/p\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180919816263,"sku":"EMWH6002","price":1340.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EMWH6002_000965.jpg?v=1788979076"},{"product_id":"emtop-stoning-hammer-1000g-fibreglass-ehamsh1000","title":"EMTOP Stoning Hammer 1000g Fibreglass EHAMSH1000","description":"\u003cp\u003eStoning hammer weighing 1000g, the tool masons and stone dressers use to trim, split and shape building stone. At a kilogram it swings comfortably one-handed for a full day, which is why it also finds work in demolition, chiselling and setting out on site.\u003c\/p\u003e\u003cp\u003eThe head is drop forged and heat treated from 45# carbon steel, a process that closes the grain and gives a face able to take repeated impact against stone and cold chisels. Its fibreglass handle absorbs the shock that travels back up from a hard strike and resists the drying and splitting that shortens the life of a timber shaft.\u003c\/p\u003e\u003cp\u003eUse it for dressing quarry stone, breaking out mortar, driving pins and star drills, and rough work on concrete. Check the head is seated before each session and dress any burr that forms on the striking face. Let the weight of the head do the work: a relaxed grip near the end of the handle delivers more force and far less fatigue than choking up behind the head.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eWeight: 1000g\u003c\/li\u003e\n\u003cli\u003eDrop-forged hammer head\u003c\/li\u003e\n\u003cli\u003eHeat treated 45# carbon steel\u003c\/li\u003e\n\u003cli\u003eFibreglass handle\u003c\/li\u003e\n\u003cli\u003eSupplied with a label\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180920176711,"sku":"EHAMSH1000","price":740.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EHAMSH1000_000882.jpg?v=1788979076"},{"product_id":"emtop-stoning-hammer-1500g-fibreglass-ehamsh1500","title":"EMTOP Stoning Hammer 1500g Fibreglass EHAMSH1500","description":"\u003cp\u003eHeavier 1500g stoning hammer for masons working larger stone and for site tasks that need more mass behind each blow. The extra 500g over the one-kilogram version does the work for you on split lines and stubborn mortar beds.\u003c\/p\u003e\u003cp\u003eIts head is drop forged from 45# carbon steel and heat treated, giving a striking face that stands up to repeated contact with stone, chisels and pins. The fibreglass handle takes the recoil out of a heavy strike and holds its bond to the head through hot, dry conditions that loosen a wooden shaft.\u003c\/p\u003e\u003cp\u003eReach for it when squaring building stone, breaking out old render, driving heavy chisels and wedges, or knocking down blockwork during alterations. Wear eye protection whenever stone or concrete is being struck, as chips travel further than expected. Replace a damaged handle rather than working on with it, since a head that has begun to loosen is a danger to everyone standing nearby. Dress off the burr that forms on the striking face with heavy use.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eWeight: 1500g\u003c\/li\u003e\n\u003cli\u003eDrop-forged hammer head\u003c\/li\u003e\n\u003cli\u003eHeat treated 45# carbon steel\u003c\/li\u003e\n\u003cli\u003eFibreglass handle\u003c\/li\u003e\n\u003cli\u003eSupplied with a label\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180922110023,"sku":"EHAMSH1500","price":950.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EHAMSH1500_000883.jpg?v=1788979093"},{"product_id":"emtop-paint-and-mortar-mixer-1400w-m14-emxr14001","title":"EMTOP Paint and Mortar Mixer 1400W M14 EMXR14001","description":"\u003cp\u003eMixing by hand wastes time and rarely gives an even batch. The EMXR14001 is a 1400W hand-held mixer for plasterers, tilers, screeders and decorators working with mortar, adhesive, render, filler and paint on site.\u003c\/p\u003e\u003cp\u003eTwo speed ranges are available, zero to 500rpm and zero to 750rpm, which lets a heavy sand and cement mix be turned slowly while thinner material such as paint or self-levelling compound is brought up faster. Drive runs through an aluminium gear box, chosen for heat dissipation and rigidity under the side loads a paddle generates in a stiff mix. An integrated work light helps in a dim room or a bucket, a mixing pad is supplied with the tool, and a set of spare carbon brushes is included. The M14 thread accepts standard paddles as the material changes.\u003c\/p\u003e\u003cp\u003eIt handles tile adhesive and grout, plaster and render, screed and mortar batches, self-levelling compound, and stirring paint and coatings back to an even consistency before spraying or rolling.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eVoltage: 220-240V~50\/60Hz\u003c\/li\u003e\n\u003cli\u003eInput power: 1400W\u003c\/li\u003e\n\u003cli\u003eNo-load speed: 0-500rpm \/ 0-750rpm\u003c\/li\u003e\n\u003cli\u003eMixing pad thread: M14\u003c\/li\u003e\n\u003cli\u003eAluminium gear box\u003c\/li\u003e\n\u003cli\u003eIntegrated work light\u003c\/li\u003e\n\u003cli\u003eIncludes 1 mixing pad\u003c\/li\u003e\n\u003cli\u003eIncludes 1 set of spare carbon brushes\u003c\/li\u003e\n\u003cli\u003eSupplied in a colour box\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180922142791,"sku":"EMXR14001","price":15280.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EMXR14001_000966.jpg?v=1788979094"},{"product_id":"emtop-staples-10mm-1000-pack-for-staple-gun-enal0210","title":"EMTOP Staples 10mm 1000 Pack for Staple Gun ENAL0210","description":"\u003cp\u003eShort staples for light fixing, supplied 1000 to a box. Upholsterers, display and exhibition fitters, framers and signwriters use this size for fabric, mesh, thin board, insect screen, plastic sheet and paper-backed materials pinned to timber.\u003c\/p\u003e\u003cp\u003eSize is 10mm with a length of 11.3mm and a wire width of 1.2mm. At that length the staple holds sheet material firmly against a solid ground without punching through the far side of thin battens, which is exactly what is wanted for trim and covering work.\u003c\/p\u003e\u003cp\u003eThe pack is collated for the ESGU1001 and ESGU3001 staple guns. Using the matched staple keeps the magazine feeding cleanly and avoids the jams and misfires that come from mixed or slightly oversized fasteners, which cost more time than the staples themselves are worth.\u003c\/p\u003e\u003cp\u003eA thousand staples is enough for a substantial run of covering work, and the box is small enough to keep in a tool bag with the gun so the two do not become separated.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eQuantity: 1000 staples\u003c\/li\u003e\n\u003cli\u003eSize: 10mm\u003c\/li\u003e\n\u003cli\u003eLength: 11.3mm\u003c\/li\u003e\n\u003cli\u003eWidth: 1.2mm\u003c\/li\u003e\n\u003cli\u003eSuitable for ESGU1001 and ESGU3001\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180923617351,"sku":"ENAL0210","price":130.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/ENAL0210_000967.jpg?v=1788979111"},{"product_id":"emtop-hand-saw-400mm-16-inch-7-tpi-65mn-ehas4002","title":"EMTOP Hand Saw 400mm 16 Inch 7 TPI 65Mn EHAS4002","description":"\u003cp\u003eFor cutting timber by hand, blade length decides how much work each stroke does. At 400mm (16 inch) the EMTOP EHAS4002 is the handy size, short enough to control in a confined space yet long enough to cut boards and battens efficiently, which suits carpenters, formwork crews, farm workshops and household use.\u003c\/p\u003e\n\u003cp\u003eThe blade is 65Mn spring steel, heat treated and rolled to 0.9mm thick, a combination that resists buckling in the cut while keeping the kerf narrow. Teeth are cut at 7 TPI and ground extra sharp, a coarse pitch that clears sawdust quickly through softwood and construction timber. The handle carries a three-colour soft grip, and a teeth protector is supplied to keep the edge safe in a bag and to guard hands when the saw is stored.\u003c\/p\u003e\n\u003cp\u003eUse it for cutting studs, battens and rafters, sizing boards and plywood, pruning and rough garden work, cutting formwork and shuttering, and general carpentry around the site or home.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e EHAS4002\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 400mm \/ 16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 0.9mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTeeth:\u003c\/strong\u003e 7 TPI, extra sharp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 65Mn, heat treated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle:\u003c\/strong\u003e three-colour soft grip\u003c\/li\u003e\n\u003cli\u003eSupplied with a teeth protector in a colour sleeve\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180923650119,"sku":"EHAS4002","price":710.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EHAS4002_000884.jpg?v=1788979112"},{"product_id":"emtop-brad-nails-10mm-5000-pack-for-staple-gun-enal0310","title":"EMTOP Brad Nails 10mm 5000 Pack for Staple Gun ENAL0310","description":"\u003cp\u003eConsumables run out faster than tools wear out, and this box of 5000 brad nails keeps a staple gun working through a run of light fixing. Upholsterers, picture framers, cabinet makers and display fitters use short brads of this kind for fabric trim, backing boards, thin beading and holding parts while adhesive sets.\u003c\/p\u003e\u003cp\u003eEach nail is 10mm long with a 1.2mm width and a 2.0mm head, small enough to sink below the surface and leave a mark that fills easily. The nails are collated for the ESGU1001 staple gun, so they feed cleanly and avoid the jamming that mismatched fasteners cause.\u003c\/p\u003e\u003cp\u003eBecause they are driven rather than hammered, the workpiece is not knocked out of position while the fixing goes in, which is what makes them suited to delicate assemblies and thin sections. Buying a full 5000-piece box is usually more economical per nail than replacing small packs part way through a job, and a spare box on the shelf keeps a workshop running.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eQuantity: 5000 pieces per box\u003c\/li\u003e\n\u003cli\u003eLength: 10mm\u003c\/li\u003e\n\u003cli\u003eHead: 2.0mm\u003c\/li\u003e\n\u003cli\u003eWidth: 1.2mm\u003c\/li\u003e\n\u003cli\u003eSuitable for ESGU1001\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180924764231,"sku":"ENAL0310","price":350.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/ENAL0310_000968.jpg?v=1788979128"},{"product_id":"emtop-brad-nails-40mm-for-air-nailers-enal18401","title":"EMTOP Brad Nails 40mm for Air Nailers ENAL18401","description":"\u003cp\u003eBrad nails hold trim, beading and light joinery together without splitting the timber or bruising the face of the work. This EMTOP pack is made up of \u003cstrong\u003e40mm\u003c\/strong\u003e brads, a length that suits skirting, architrave, door stops, glazing beads, picture frames and thin panel work where a longer fastener would punch straight through.\u003c\/p\u003e\u003cp\u003eThe slim gauge and small head are the point of a brad. The nail sinks below the surface, leaves a hole small enough to vanish under filler and paint, and holds the piece steady while the adhesive cures. Loaded into a brad nailer, a strip lets a fitter place fastener after fastener one-handed while the other hand keeps the moulding true.\u003c\/p\u003e\u003cp\u003eCarpenters, shopfitters and furniture workshops tend to keep a box on the bench for everyday second-fix work.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNail length: 40mm\u003c\/li\u003e\n\u003cli\u003eModel: ENAL18401\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180925190215,"sku":"ENAL18401","price":780.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/ENAL18401_004551.jpg?v=1788979133"},{"product_id":"emtop-staples-12mm-6-3mm-crown-1000-pack-enal0412","title":"EMTOP Staples 12mm 6.3mm Crown 1000 Pack ENAL0412","description":"\u003cp\u003eA wider crown holds soft and loose materials better, and at 6.3mm across these staples grip fabric, netting, membrane and thin sheet more securely than a narrow crown of the same leg length. Upholstery, seat covers, screen doors, insulation and temporary sheeting are typical work.\u003c\/p\u003e\u003cp\u003eLeg length is 12mm on 1.2mm wire, which suits fixing into softwood battens and plywood grounds where the fastener needs to bite without breaking through. The box holds 1000 staples, a practical quantity for a single job or a stocked drawer.\u003c\/p\u003e\u003cp\u003eThese are collated for the ESGU1001 staple gun. Matching the staple to the tool is what keeps the gun feeding reliably, so it is worth ordering the correct pack rather than a generic equivalent that may be a fraction out on wire size.\u003c\/p\u003e\u003cp\u003eKeeping both a narrow and a wide crown staple to hand covers most light fixing work, since the choice depends far more on what is being held than on what it is being held to.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eQuantity: 1000 pieces per box\u003c\/li\u003e\n\u003cli\u003eLength: 12mm\u003c\/li\u003e\n\u003cli\u003eStaple crown: 6.3mm\u003c\/li\u003e\n\u003cli\u003eWidth: 1.2mm\u003c\/li\u003e\n\u003cli\u003eSuitable for ESGU1001\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180925583431,"sku":"ENAL0412","price":150.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/ENAL0412_000969.jpg?v=1788979144"},{"product_id":"emtop-demolition-breaker-2200w-75j-30kg-edbrh2201","title":"EMTOP Demolition Breaker 2200W 75J 30kg EDBRH2201","description":"\u003cp\u003eAt 30kg and 75 joules a blow, the EDBRH2201 is the heavy end of the range, intended for mass concrete rather than screed. Demolition contractors, road and drainage crews and plant hire fleets are the buyers, working the tool vertically on slabs, foundations and reinforced bases.\u003c\/p\u003e\u003cp\u003ePower is 2200W from a 220-240V supply, and the blow rate of 950 per minute is deliberately slower than a lighter breaker: each strike carries more energy into the material. An anti-vibration system takes some of that back out of the operator's hands and arms, which matters over a full shift. The hex chuck accepts standard steels, and a 4 metre rubber cable gives working reach from a distribution board or generator. Two chisels and a set of spare carbon brushes are supplied in a carton box.\u003c\/p\u003e\u003cp\u003eSend it to mass concrete and raft foundations, thick slabs and pile caps, breaking out old machine bases, road and hardstanding removal, and rock and murram where a smaller breaker simply bounces.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eVoltage: 220-240V~50\/60Hz\u003c\/li\u003e\n\u003cli\u003eInput power: 2200W\u003c\/li\u003e\n\u003cli\u003eImpact rate: 950bpm\u003c\/li\u003e\n\u003cli\u003eImpact force: 75J\u003c\/li\u003e\n\u003cli\u003eAnti-vibration system\u003c\/li\u003e\n\u003cli\u003eHex chuck system\u003c\/li\u003e\n\u003cli\u003eWeight: 30kg\u003c\/li\u003e\n\u003cli\u003eCable: 4 metre rubber cable\u003c\/li\u003e\n\u003cli\u003eIncludes 2 chisels\u003c\/li\u003e\n\u003cli\u003eIncludes 1 set of spare carbon brushes\u003c\/li\u003e\n\u003cli\u003eSupplied in a carton box\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180925976647,"sku":"EDBRH2201","price":71500.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EDBRH2201_000830.jpg?v=1788979146"},{"product_id":"emtop-saw-chain-24-inch-3-8-pitch-84-links-ecsl5241","title":"EMTOP Saw Chain 24 Inch 3\/8\" Pitch 84 Links ECSL5241","description":"\u003cp\u003eChains wear out long before saws do, and a dull or stretched chain makes even a strong machine cut badly. This 24 inch replacement chain restores the original cutting performance on the EGCS24621 and EGCS26621 petrol chainsaws.\u003c\/p\u003e\u003cp\u003eThree figures decide whether a chain fits, and all three are fixed here: the pitch is 3\/8\", the gauge is 0.063\" and there are 84 drive links. Matching the chain to the bar on all three counts is what stops it jumping the rails or running slack, so it is worth quoting these numbers when ordering rather than relying on bar length alone.\u003c\/p\u003e\u003cp\u003eAnyone felling or cross-cutting regularly should keep a spare chain and swap it while the worn one is being sharpened, so that a day's work is not held up by a single blunt chain in the middle of a stand of timber.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLength: 24\"\u003c\/li\u003e\n\u003cli\u003eChain pitch: 3\/8\"\u003c\/li\u003e\n\u003cli\u003eChain gauge: 0.063\"\u003c\/li\u003e\n\u003cli\u003eDrive links: 84\u003c\/li\u003e\n\u003cli\u003eSuitable for EGCS24621 and EGCS26621 chain saws\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180926763079,"sku":"ECSL5241","price":3190.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/ECSL5241_004552.jpg?v=1788979157"},{"product_id":"emtop-demolition-breaker-1500w-sds-max-edbrm1501","title":"EMTOP Demolition Breaker 1500W SDS-Max EDBRM1501","description":"\u003cp\u003eBetween a rotary hammer and a full jackhammer sits the 10kg class, and the EDBRM1501 is EMTOP's entry there. Its SDS-Max chuck and lighter weight make it the tool for chasing, wall openings and overhead work that a 30kg breaker cannot be held up to.\u003c\/p\u003e\u003cp\u003eThe 1500W motor gives 1000 to 1900 blows per minute with impact energy variable from 6 to 25 joules, so the same tool can nibble at tile and render or drive hard into concrete. Constant electronics hold speed as the load rises, an anti-vibration system reduces what reaches the operator, and a chisel-locking system holds the steel at the chosen angle for scabbling and cutting along a line. A carbon brush maintenance indicator warns before the brushes fail, and a spare set is supplied with two chisels in a BMC case.\u003c\/p\u003e\u003cp\u003eIt is well suited to forming door and window openings, chasing for conduit and pipework, removing tiles, render and screed, and trimming concrete around penetrations.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eVoltage: 220-240V~50\/60Hz\u003c\/li\u003e\n\u003cli\u003eInput power: 1500W\u003c\/li\u003e\n\u003cli\u003eImpact rate: 1000-1900bpm\u003c\/li\u003e\n\u003cli\u003eImpact force: 6-25J\u003c\/li\u003e\n\u003cli\u003eAnti-vibration system\u003c\/li\u003e\n\u003cli\u003eCarbon brush maintenance indicator\u003c\/li\u003e\n\u003cli\u003eConstant electronics power\u003c\/li\u003e\n\u003cli\u003eChisel-locking system\u003c\/li\u003e\n\u003cli\u003eSDS-Max chuck system\u003c\/li\u003e\n\u003cli\u003eWeight: 10kg\u003c\/li\u003e\n\u003cli\u003eIncludes 2 chisels\u003c\/li\u003e\n\u003cli\u003eIncludes 1 set of spare carbon brushes\u003c\/li\u003e\n\u003cli\u003eSupplied in a BMC case\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180926992455,"sku":"EDBRM1501","price":29190.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EDBRM1501_000831.jpg?v=1788979165"},{"product_id":"emtop-brad-nails-18-gauge-25mm-and-50mm-5000-pack","title":"EMTOP Brad Nails 18 Gauge 25mm and 50mm 5000 Pack","description":"\u003cp\u003eCollated brad nails in 18 gauge, supplied in 25mm and 50mm lengths so that the same nailer can be used for light beading and for heavier trim without changing tools. Joiners, shopfitters and furniture makers work through these by the box on skirting, architrave, glazing beads, panelling and cabinet assembly.\u003c\/p\u003e\u003cp\u003eBoth lengths use 1.25 x 1.0mm wire, the standard 18 gauge section, which leaves a hole small enough to fill and paint over. The shorter 25mm nail is the choice for beads, small mouldings and thin sheet fixed to a solid ground, while the 50mm nail holds architrave and heavier sections where more grip is needed in the timber behind.\u003c\/p\u003e\u003cp\u003eEach box holds 5000 nails. Both sizes fit the ECBN504001 and ECBN155001 pneumatic nailers as well as the ELBNLI2028, ELBNLI2001 and ELBNLI2036 cordless models, with the 25mm length also matching ECBN103001.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e25mm option: brad length 25mm, suits ECBN504001, ECBN155001, ELBNLI2028, ELBNLI2001, ELBNLI2036 and ECBN103001\u003c\/li\u003e\n\u003cli\u003e50mm option: brad length 50mm, suits ECBN504001, ECBN155001, ELBNLI2028, ELBNLI2001 and ELBNLI2036\u003c\/li\u003e\n\u003cli\u003eGauge: 18 (1.25 x 1.0mm), both options\u003c\/li\u003e\n\u003cli\u003eQuantity: 5000 pieces per box, both options\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"25mm","offer_id":43180927123527,"sku":"ENAL18251","price":650.0,"currency_code":"KES","in_stock":true},{"title":"50mm","offer_id":43180927156295,"sku":"ENAL18501","price":1130.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/ENAL18251_000970.jpg?v=1788979165"},{"product_id":"emtop-wet-and-dry-vacuum-cleaner-1000w-12l-evcr0801","title":"EMTOP Wet and Dry Vacuum Cleaner 1000W 12L EVCR0801","description":"\u003cp\u003eSawdust, plaster, broken glass and spilled water are all beyond an ordinary household vacuum, which is why a wet and dry machine belongs in a workshop, a garage or the boot of a service vehicle. This 12 litre model is the compact option, easy to carry between jobs.\u003c\/p\u003e\u003cp\u003eSuction is produced by a 1000W copper wire motor developing 18KPa at an airflow of 1.9 cubic metres per minute, drawn into a metal tank rather than a plastic drum. A HEPA filter traps fine dust, which matters when cleaning up after cutting board, sanding or drilling masonry indoors.\u003c\/p\u003e\u003cp\u003eThe kit includes a 1.5 metre flexible hose, a three-part plastic tube, a plastic floor brush and a 2-in-1 brush for corners and upholstery, with a 2.3 metre cord. Both wet and dry pick-up are supported, so the same machine handles a dusty floor and a burst hose.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eVoltage: 220V-240V~50\/60Hz\u003c\/li\u003e\n\u003cli\u003eInput power: 1000W\u003c\/li\u003e\n\u003cli\u003eCopper wire motor\u003c\/li\u003e\n\u003cli\u003eDust capacity: 12L\u003c\/li\u003e\n\u003cli\u003eAir flow: 1.9m3\/min\u003c\/li\u003e\n\u003cli\u003eVacuum pressure: 18KPa\u003c\/li\u003e\n\u003cli\u003eMetal tank\u003c\/li\u003e\n\u003cli\u003eHEPA filter\u003c\/li\u003e\n\u003cli\u003eWet and dry cleaning\u003c\/li\u003e\n\u003cli\u003e1.5m flexible hose, three-part plastic tube, plastic floor brush, 2-in-1 brush\u003c\/li\u003e\n\u003cli\u003eCord length: 2.3m\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180927844423,"sku":"EVCR0801","price":7420.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EVCR0801_004553.jpg?v=1788979176"},{"product_id":"emtop-battery-charger-12v-24v-9a-boost-12a-efcr16011","title":"EMTOP Battery Charger 12V\/24V 9A Boost 12A EFCR16011","description":"\u003cp\u003eVehicles, tractors, standby plant and inverter banks all suffer flat batteries, and a workshop needs a charger that handles both 12V and 24V systems without swapping units. This one covers both, delivering 9A on the 12V setting and 4A on 24V from a 220-240V mains supply at 50 or 60Hz.\u003c\/p\u003e\u003cp\u003eA boost setting raises output to 12A when a battery has been left standing and needs a faster recovery before it will crank an engine. The reference capacity range of 28 to 180Ah spans everything from a small car battery to lorry, tractor and solar storage cells. Class H insulation reflects the temperature the transformer is built to tolerate during long charging sessions, and the 5.6kg weight tells you it is a transformer unit rather than a light electronic charger, meant to sit in a workshop and work.\u003c\/p\u003e\u003cp\u003eGarages, transport yards, farms, generator hire fleets and solar installers are the buyers; it arrives in a carton box.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: EFCR16011\u003c\/li\u003e\n\u003cli\u003eInput voltage: 220-240V\u003c\/li\u003e\n\u003cli\u003eFrequency: 50\/60Hz\u003c\/li\u003e\n\u003cli\u003eCharging voltage: 12V \/ 24V\u003c\/li\u003e\n\u003cli\u003eRated current: 9A \/ 4A\u003c\/li\u003e\n\u003cli\u003eBoost current: 12A\u003c\/li\u003e\n\u003cli\u003eReference capacity: 28-180Ah\u003c\/li\u003e\n\u003cli\u003eInsulation class: H\u003c\/li\u003e\n\u003cli\u003eWeight: 5.6kg\u003c\/li\u003e\n\u003cli\u003ePacked in a carton box\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180927877191,"sku":"EFCR16011","price":10230.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EFCR16011_000858.jpg?v=1788979183"},{"product_id":"emtop-crown-staples-25mm-18-gauge-2500-pack-enal18252","title":"EMTOP Crown Staples 25mm 18 Gauge 2500 Pack ENAL18252","description":"\u003cp\u003eNarrow crown staples hold better than a single brad where thin material has to be pinned to a frame, because the crown spreads the load across two legs. This box of 2500 covers cabinet backs, drawer bottoms, sheathing, fabric and mesh fixed to timber.\u003c\/p\u003e\u003cp\u003eLeg length is 25mm and the crown measures 5.7mm, in 18 gauge with 1.25 x 1.0mm wire. That combination sinks flush into softwood and plywood without splitting thin edges, and leaves a fixing that resists pulling through in a way a plain pin does not.\u003c\/p\u003e\u003cp\u003eThe staples are collated for the ECBN504001 combo nailer, which fires both brads and staples, so a workshop running that tool can keep a box of each on the shelf and switch between them as the job requires. Consumables of this kind are worth ordering ahead of the work rather than during it.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStaple size: 25mm\u003c\/li\u003e\n\u003cli\u003eStaple crown: 5.7mm\u003c\/li\u003e\n\u003cli\u003eGauge: 18 (1.25 x 1.0mm)\u003c\/li\u003e\n\u003cli\u003eQuantity: 2500 pieces per box\u003c\/li\u003e\n\u003cli\u003eSuitable for ECBN504001\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180927909959,"sku":"ENAL18252","price":650.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/ENAL18252_000971.jpg?v=1788979182"},{"product_id":"emtop-4-inch-deep-well-pump-750w-1hp-82m-head-ewppd07501","title":"EMTOP 4 Inch Deep Well Pump 750W 1HP 82m Head EWPPD07501","description":"\u003cp\u003eOne horsepower is the size most commonly specified for a family borehole feeding an elevated tank, and this EMTOP 4 inch deep well pump sits exactly there. Rated 750W, it lifts to a maximum head of 82 metres, enough for a deeper bore or a tank stand well above the wellhead.\u003c\/p\u003e\u003cp\u003eTen impeller stages generate that pressure while maintaining a maximum flow of 6.0 cubic metres per hour through a 1-1\/4 inch discharge. Construction follows the rest of the range: a copper wire motor, a stainless steel pump body sized for a 4 inch bore, and 20 metres of cable already fitted so the installer has slack to work with at the head. A control box is required and is not included.\u003c\/p\u003e\u003cp\u003eIt is suited to residential boreholes, rental and apartment blocks, farms running drip or sprinkler lines, schools, clinics and small commercial premises. Confirm the bore yield and dynamic water level so the pump is not run dry.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 220-240V~50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated power:\u003c\/strong\u003e 750W (1.0HP)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum head:\u003c\/strong\u003e 82m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow:\u003c\/strong\u003e 6.0 cubic metres per hour\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe diameter:\u003c\/strong\u003e 1-1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWell pump body:\u003c\/strong\u003e 4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpeller:\u003c\/strong\u003e 10 stage\u003c\/li\u003e\n\u003cli\u003eCopper wire motor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump body:\u003c\/strong\u003e stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable length:\u003c\/strong\u003e 20m\u003c\/li\u003e\n\u003cli\u003eControl box not included\u003c\/li\u003e\n\u003cli\u003eSupplied in a carton box\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180927942727,"sku":"EWPPD07501","price":19850.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EWPPD07501_001059.jpg?v=1788979183"},{"product_id":"emtop-wet-and-dry-vacuum-2x1200w-75l-stainless-evcr2401","title":"EMTOP Wet and Dry Vacuum 2x1200W 75L Stainless EVCR2401","description":"\u003cp\u003eTwin motors and a 75 litre tank put this machine in the industrial class. Contractors clearing site debris, car wash bays extracting interiors, factories, hotels and cleaning companies use vacuums of this size where emptying a small drum every few minutes would make the job impossible.\u003c\/p\u003e\u003cp\u003eTwo 1200W motors move 3 cubic metres of air per minute at 16 to 17KPa, and the tank is stainless steel rather than painted mild steel, which stands up to repeated wet pick-up without rusting through at the seams. A 5.5 metre power cable covers a large room or a full vehicle bay from a single socket.\u003c\/p\u003e\u003cp\u003eSupplied with the machine are a flexible hose, a floor brush, a two-part metal tube, a cloth filter and a metal handle. Both wet and dry cleaning are supported, so flooding, slurry and dry debris are all within its scope.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eVoltage: 220V-240V~50\/60Hz\u003c\/li\u003e\n\u003cli\u003eInput power: 2 x 1200W\u003c\/li\u003e\n\u003cli\u003eAir flow: 3CBM\/min\u003c\/li\u003e\n\u003cli\u003eVacuum pressure: 16-17KPa\u003c\/li\u003e\n\u003cli\u003eDust capacity: 75L\u003c\/li\u003e\n\u003cli\u003eTank material: stainless steel\u003c\/li\u003e\n\u003cli\u003ePower cable: 5.5m\u003c\/li\u003e\n\u003cli\u003eWet and dry cleaning\u003c\/li\u003e\n\u003cli\u003eSupplied with flexible hose, floor brush, two-part metal tube, cloth filter and metal handle\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180928565319,"sku":"EVCR2401","price":41560.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EVCR2401_004554.jpg?v=1788979193"},{"product_id":"emtop-crown-staples-40mm-18-gauge-2500-pack-enal18402","title":"EMTOP Crown Staples 40mm 18 Gauge 2500 Pack ENAL18402","description":"\u003cp\u003eLonger legs mean more grip, and at 40mm these narrow crown staples are the choice when thin material has to be held to a deeper timber ground. Furniture makers, crate and pallet builders, roofers fixing membrane and joiners assembling carcasses all use staples at this length.\u003c\/p\u003e\u003cp\u003eThe crown is 5.7mm across in 18 gauge, using 1.25 x 1.0mm wire, so the fixing pulls tight without cutting through plywood, hardboard, fabric or membrane. Compared with the 25mm staple, the extra leg length matters where the top layer may lift or where a temporary fixing has to hold under handling.\u003c\/p\u003e\u003cp\u003eSupplied 2500 to a box and collated for the ECBN504001 combo nailer, this is a working consumable rather than an occasional purchase, and keeping a box in reserve avoids stopping halfway through a job to go and find more.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStaple size: 40mm\u003c\/li\u003e\n\u003cli\u003eStaple crown: 5.7mm\u003c\/li\u003e\n\u003cli\u003eGauge: 18 (1.25 x 1.0mm)\u003c\/li\u003e\n\u003cli\u003eQuantity: 2500 pieces per box\u003c\/li\u003e\n\u003cli\u003eSuitable for ECBN504001\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180928827463,"sku":"ENAL18402","price":1000.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/ENAL18402_000972.jpg?v=1788979198"},{"product_id":"emtop-4-inch-deep-well-pump-1100w-1-5hp-112m-ewppd11001","title":"EMTOP 4 Inch Deep Well Pump 1100W 1.5HP 112m EWPPD11001","description":"\u003cp\u003eDeeper boreholes and long uphill delivery runs need real pressure behind the water. Rated 1100W, or 1.5 horsepower, this EMTOP 4 inch deep well pump reaches a maximum head of 112 metres, which covers most residential and light commercial bores in the region.\u003c\/p\u003e\u003cp\u003eFourteen impeller stages produce that lift, each adding its share of pressure, while maximum flow stays at 6.0 cubic metres per hour through the 1-1\/4 inch outlet. The motor is copper wound and the pump body is stainless, chosen for permanent immersion in a 4 inch casing, and 20 metres of cable come fitted so the installer can reach the wellhead without an early splice. Order the matching control box separately.\u003c\/p\u003e\u003cp\u003eConsider it for deep domestic boreholes, apartment blocks and gated developments, farm irrigation, greenhouses, hotels and lodges, and any site where water must climb to a high tank. Size the pump against the tested yield of the bore before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 220-240V~50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated power:\u003c\/strong\u003e 1100W (1.5HP)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum head:\u003c\/strong\u003e 112m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow:\u003c\/strong\u003e 6.0 cubic metres per hour\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe diameter:\u003c\/strong\u003e 1-1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWell pump body:\u003c\/strong\u003e 4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpeller:\u003c\/strong\u003e 14 stage\u003c\/li\u003e\n\u003cli\u003eCopper wire motor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump body:\u003c\/strong\u003e stainless\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable length:\u003c\/strong\u003e 20m\u003c\/li\u003e\n\u003cli\u003eControl box not included\u003c\/li\u003e\n\u003cli\u003eSupplied in a carton box\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180928860231,"sku":"EWPPD11001","price":23190.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EWPPD11001_001060.jpg?v=1788979205"},{"product_id":"emtop-163-piece-tool-chest-set-7-drawers-ehts01631","title":"EMTOP 163-Piece Tool Chest Set 7 Drawers EHTS01631","description":"\u003cp\u003eA rolling chest changes how a workshop runs: tools stay in a fixed place, the whole kit follows the job across the floor, and stocktaking takes a glance rather than an afternoon. This set combines a seven-drawer cabinet with a matched 163-piece tool inventory.\u003c\/p\u003e\u003cp\u003eThe cabinet measures 765 x 465 x 812mm, or 976mm tall once the 5 x 2 inch casters are fitted. Cabinet panels are 0.8 to 1.0mm thick with 0.7mm drawer bodies: five shallow drawers at 536 x 410 x 74.5mm for sockets and spanners, and two deep drawers at 536 x 410 x 153.5mm for bulkier items. The first drawer alone carries a 1\/4 inch ratchet, thirteen sockets from 4 to 14mm, seventeen 32mm bit sockets in hex, star, slotted and cross patterns, eight 50mm deep sockets from 6 to 13mm, 50 and 100mm extension bars, a 150mm spinner handle, a 150mm flexible extension, a universal joint and a sliding T bar.\u003c\/p\u003e\u003cp\u003eGarages, fabrication shops, plant yards and generator service teams use chests like this as the fixed base of their tooling.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: EHTS01631\u003c\/li\u003e\n\u003cli\u003e163-piece tool chest set\u003c\/li\u003e\n\u003cli\u003eChest with 7 drawers\u003c\/li\u003e\n\u003cli\u003eOverall size: 765 x 465 x 812mm\u003c\/li\u003e\n\u003cli\u003eOverall size with casters: 465 x 976mm height, casters 5 inch x 2 inch\u003c\/li\u003e\n\u003cli\u003eCabinet thickness: 0.8 to 1.0mm\u003c\/li\u003e\n\u003cli\u003eDrawer thickness: 0.7mm\u003c\/li\u003e\n\u003cli\u003e5 x drawers, 536 x 410 x 74.5mm\u003c\/li\u003e\n\u003cli\u003e2 x drawers, 536 x 410 x 153.5mm\u003c\/li\u003e\n\u003cli\u003eDrawer 1: 1 x 1\/4 inch ratchet wrench\u003c\/li\u003e\n\u003cli\u003eDrawer 1: 13 x 1\/4 inch sockets, 4 to 14mm\u003c\/li\u003e\n\u003cli\u003eDrawer 1: 17 x 1\/4 inch x 32mm bit sockets, hex 3-6mm, star T8-T30, SL 4-7mm, PH1, PH2, PZ1, PZ2\u003c\/li\u003e\n\u003cli\u003eDrawer 1: 8 x 1\/4 inch 50mm deep sockets, 6 to 13mm\u003c\/li\u003e\n\u003cli\u003eDrawer 1: 2 x extension bars, 1\/4 inch x 50mm and 1\/4 inch x 100mm\u003c\/li\u003e\n\u003cli\u003eDrawer 1: 1 x spinner handle, 1\/4 inch x 150mm\u003c\/li\u003e\n\u003cli\u003eDrawer 1: 1 x flexible extension bar, 1\/4 inch x 150mm\u003c\/li\u003e\n\u003cli\u003eDrawer 1: 1 x 1\/4 inch universal joint\u003c\/li\u003e\n\u003cli\u003eDrawer 1: 1 x sliding T bar, 1\/4 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180929253447,"sku":"EHTS01631","price":88800.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EHTS01631_000904.jpg?v=1788979210"},{"product_id":"emtop-dry-diamond-disc-for-angle-grinder-eddc011152","title":"EMTOP Dry Diamond Disc for Angle Grinder EDDC011152","description":"\u003cp\u003eDiamond discs cut hard materials by abrasion rather than with teeth, which is why they outlast an abrasive wheel on masonry work. A dry cutting disc is made to run without a water feed, on a standard angle grinder.\u003c\/p\u003e\u003cp\u003eTypical work is cutting concrete, block, brick, kerb, paving, roof tile and screed for chases, openings and trimming to a line. Let the disc reach full speed before it touches the work, ease it through the cut instead of forcing it, and lift it clear now and then to cool.\u003c\/p\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180929810503,"sku":"EDDC011152","price":310.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EDDC011152_004555.jpg?v=1788979215"},{"product_id":"emtop-4-inch-deep-well-pump-1500w-2hp-135m-ewppd15001","title":"EMTOP 4 Inch Deep Well Pump 1500W 2HP 135m EWPPD15001","description":"\u003cp\u003eAt the top of the EMTOP 4 inch borehole range sits this 1500W pump, two horsepower, with a maximum head of 135 metres. It is the choice when the water table is low, the tank stand is high, or the delivery line runs a long way uphill from the wellhead.\u003c\/p\u003e\u003cp\u003eSeventeen impeller stages build the column pressure required for that lift, with maximum flow held at 6.0 cubic metres per hour through a 1-1\/4 inch discharge. The motor uses copper windings and the pump body is stainless steel for continuous submerged duty, and 20 metres of cable are supplied on the unit. The control box is ordered separately and should be matched to this model.\u003c\/p\u003e\u003cp\u003eIt is aimed at deep boreholes, farms and irrigation schemes, lodges and institutions, water vending points and multi-tenant developments. As with any borehole pump, install it above the pump intake level recommended for the bore and protect it against dry running.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 220-240V~50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated power:\u003c\/strong\u003e 1500W (2HP)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum head:\u003c\/strong\u003e 135m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow:\u003c\/strong\u003e 6.0 cubic metres per hour\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe diameter:\u003c\/strong\u003e 1-1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWell pump body:\u003c\/strong\u003e 4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpeller:\u003c\/strong\u003e 17 stage\u003c\/li\u003e\n\u003cli\u003eCopper wire motor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump body:\u003c\/strong\u003e stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable length:\u003c\/strong\u003e 20m\u003c\/li\u003e\n\u003cli\u003eControl box not included\u003c\/li\u003e\n\u003cli\u003eSupplied in a carton box\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180930531399,"sku":"EWPPD15001","price":27410.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EWPPD15001_001061.jpg?v=1788979227"},{"product_id":"emtop-jigsaw-blades-for-wood-74mm-8-tpi-5pcs-ejsbt111c","title":"EMTOP Jigsaw Blades for Wood 74mm 8 TPI 5pcs EJSBT111C","description":"\u003cp\u003eCarpenters and shopfitters cutting curves and cut-outs in timber get through jigsaw blades quickly, and a five-piece set keeps the machine working. These EMTOP blades are the basic wood pattern, the general purpose choice for fast, straightforward cutting in board and solid stock.\u003c\/p\u003e\u003cp\u003eEach blade carries 74mm of tooth length at 8 teeth per inch, a coarse pitch that clears chips freely and keeps the cut moving rather than burning. The blades are milled from chrome vanadium steel, and the T-shank profile drops into the quick-change holder found on common jigsaws.\u003c\/p\u003e\u003cp\u003eThey handle worktop cut-outs for sinks and hobs, door and window openings in board, roof and ceiling boarding, formwork, furniture making, and rough sizing of softwood and plywood on site. Supplied five per blister card, they suit joiners, fundis, maintenance teams and hardware shops selling jigsaw consumables.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e basic blade for wood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of tooth:\u003c\/strong\u003e 74mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePitch:\u003c\/strong\u003e 8 TPI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e chrome vanadium, milled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack quantity:\u003c\/strong\u003e 5 pieces per set\u003c\/li\u003e\n\u003cli\u003eSupplied on a blister card\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180930564167,"sku":"EJSBT111C","price":210.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EJSBT111C_000905.jpg?v=1788979228"},{"product_id":"emtop-jigsaw-blade-for-timber-and-board-esbt111c","title":"EMTOP Jigsaw Blade for Timber and Board ESBT111C","description":"\u003cp\u003eCutting timber with a jigsaw calls for a coarser, more aggressive tooth than metal work, and this blade is set up for exactly that: quick progress through softwood, plywood, chipboard and blockboard without bogging the machine down.\u003c\/p\u003e\u003cp\u003eCarpenters and shopfitters use blades of this pattern for cutting out sink and hob openings, notching around pipes, trimming panels and following curves that a circular saw cannot reach. The T-shank drops into the tool-free chuck on most jigsaws, so swapping between wood and metal blades takes seconds on site.\u003c\/p\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180930596935,"sku":"ESBT111C","price":180.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/ESBT111C_004556.jpg?v=1788979229"},{"product_id":"emtop-cordless-impact-drill-20v-45nm-ecidl620012","title":"EMTOP Cordless Impact Drill 20V 45Nm ECIDL620012","description":"\u003cp\u003eWorking off 20V packs, this impact drill is the one to choose if the rest of your cordless kit already runs on that platform. It develops 45Nm of maximum torque through a 0.8 to 10mm keyless chuck and carries a hammer setting for masonry alongside the standard drill and clutch positions.\u003c\/p\u003e\u003cp\u003eEighteen torque settings plus drill and hammer give fine control over how hard a screw is driven, which protects the material and the fixing. A mechanical two-speed gearbox provides 0-400rpm and 0-1500rpm, an integrated work light covers dark corners, and an LED battery power indicator saves the guesswork of whether a pack will last the next task. Two 2.0Ah batteries, a charger and 47 accessories are supplied in a plastic case, so drilling and driving consumables are covered from the start.\u003c\/p\u003e\u003cp\u003eMaintenance teams, fitters, solar and CCTV installers and site electricians take the most advantage of the larger battery capacity, which gives more holes per charge than the 12V equivalent.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: ECIDL620012\u003c\/li\u003e\n\u003cli\u003eVoltage: 20V\u003c\/li\u003e\n\u003cli\u003eNo-load speed: 0-400 \/ 0-1500rpm\u003c\/li\u003e\n\u003cli\u003eMaximum torque: 45Nm\u003c\/li\u003e\n\u003cli\u003eChuck capacity: 0.8-10mm\u003c\/li\u003e\n\u003cli\u003eTorque settings: 18+1+1\u003c\/li\u003e\n\u003cli\u003eMechanical 2-speed gear\u003c\/li\u003e\n\u003cli\u003eCharge volts: 220-240V~50\/60Hz\u003c\/li\u003e\n\u003cli\u003eIntegrated work light and LED battery power indicator\u003c\/li\u003e\n\u003cli\u003eSupplied with 2 x 2.0Ah battery packs (EBPK20011)\u003c\/li\u003e\n\u003cli\u003eSupplied with 1 charger (EFCR20200)\u003c\/li\u003e\n\u003cli\u003eSupplied with 47 accessories\u003c\/li\u003e\n\u003cli\u003ePacked in a plastic box\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180931809351,"sku":"ECIDL620012","price":11040.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/ECIDL620012_000813.jpg?v=1788979239"},{"product_id":"emtop-jigsaw-blade-for-metal-cutting-ejsbt118b","title":"EMTOP Jigsaw Blade for Metal Cutting EJSBT118B","description":"\u003cp\u003eThis jigsaw blade is toothed for metal rather than timber, with the finer, closer pitch that metal cutting needs so the teeth stay in contact with the workpiece instead of snatching at it. The T-shank fits the quick-change chuck used on most modern jigsaws.\u003c\/p\u003e\u003cp\u003eIt is the blade to reach for when cutting sheet, thin plate, tube, angle or profile on fabrication, sheet metal, ducting and general repair work. Keep the shoe flat, let the machine set the pace and use a cutting lubricant where the material allows it.\u003c\/p\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180932268103,"sku":"EJSBT118B","price":310.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EJSBT118B_004557.jpg?v=1788979245"},{"product_id":"emtop-submersible-sewage-pump-for-dirty-water-ewppq07508","title":"EMTOP Submersible Sewage Pump for Dirty Water EWPPQ07508","description":"\u003cp\u003eSewage and waste water carry solids that would block a clean-water pump, so a pump built for the duty uses a wider passage and an impeller designed to pass what comes through it.\u003c\/p\u003e\u003cp\u003eThe unit sits in the liquid it is moving, which keeps it primed and quiet, and lifts the contents out through a hose or pipe to the discharge point.\u003c\/p\u003e\u003cp\u003eTypical duties include septic and holding pits, drainage sumps, basement and pit dewatering after heavy rain, and construction sites where dirty water has to be cleared before work can resume.\u003c\/p\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180932300871,"sku":"EWPPQ07508","price":7850.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EWPPQ07508_001063.jpg?v=1788979245"},{"product_id":"emtop-jig-saw-400w-55mm-variable-speed-ejsw4001","title":"EMTOP Jig Saw 400W 55mm Variable Speed EJSW4001","description":"\u003cp\u003eCurved and awkward cuts in board and thin metal are what a jig saw is for, and the EJSW4001 covers them at 400W. It is the light corded model in the range, suited to fitters, shopfitters and home users who cut occasionally rather than all day.\u003c\/p\u003e\u003cp\u003eStroke rate is variable between 800 and 3000 per minute, which lets the operator slow down for steel and plastic where too much speed melts or blues the cut, and open up in timber. Cutting capacity is 55mm in wood and 3mm in steel. One saw blade is supplied with the tool, and standard blades fit for cutting different materials as jobs require. Being mains driven, it maintains stroke rate through a long cut without any drop in charge.\u003c\/p\u003e\u003cp\u003eReach for it when cutting shelf notches around pipes, forming openings in ply and MDF, cutting laminate and skirting to shape, trimming thin sheet metal, and following a curved pencil line where a circular saw cannot go.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eVoltage: 220-240V~50\/60Hz\u003c\/li\u003e\n\u003cli\u003eInput power: 400W\u003c\/li\u003e\n\u003cli\u003eNo-load speed: 800-3000rpm\u003c\/li\u003e\n\u003cli\u003eCutting capacity in wood: 55mm\u003c\/li\u003e\n\u003cli\u003eCutting capacity in steel: 3mm\u003c\/li\u003e\n\u003cli\u003eVariable speed control\u003c\/li\u003e\n\u003cli\u003eIncludes 1 saw blade\u003c\/li\u003e\n\u003cli\u003eSupplied in a colour box\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180932333639,"sku":"EJSW4001","price":3450.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EJSW4001_000906.jpg?v=1788979246"},{"product_id":"emtop-hand-saw-500mm-20-inch-7-tpi-65mn-ehas5002","title":"EMTOP Hand Saw 500mm 20 Inch 7 TPI 65Mn EHAS5002","description":"\u003cp\u003eLonger strokes mean fewer of them, and on wide boards a 500mm blade cuts noticeably faster than a shorter saw. The EMTOP EHAS5002 is the 20 inch model in the range, favoured by carpenters, joiners, formwork crews and anyone regularly ripping and crosscutting construction timber.\u003c\/p\u003e\n\u003cp\u003eIts blade is heat-treated 65Mn spring steel at 0.9mm thick, stiff enough to run straight over the longer span while keeping the cut narrow and the effort down. The teeth are cut at 7 TPI and ground extra sharp for rapid waste removal in softwood and site timber. A three-colour soft handle spreads the load through a long session, and a teeth protector is included to guard the edge in transit and in the tool bag.\u003c\/p\u003e\n\u003cp\u003eSuited to cutting rafters, joists and studwork, sizing sheet material and wide boards, shuttering and formwork, timber yard and joinery shop work, and general building and farm carpentry. Starting the cut on the pull stroke with the thumb as a guide, then lengthening out to use the full blade, gets the most from the extra reach this size offers.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e EHAS5002\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 500mm \/ 20 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 0.9mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTeeth:\u003c\/strong\u003e 7 TPI, extra sharp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 65Mn, heat treated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle:\u003c\/strong\u003e three-colour soft grip\u003c\/li\u003e\n\u003cli\u003eSupplied with a teeth protector in a colour sleeve\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180933873735,"sku":"EHAS5002","price":820.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EHAS5002_000886.jpg?v=1788979266"},{"product_id":"emtop-submersible-clean-water-pump-370w-0-5hp-ewpps03701","title":"EMTOP Submersible Clean Water Pump 370W 0.5HP EWPPS03701","description":"\u003cp\u003eEmptying a sump, a tank or a flooded basement is a job for a pump that can sit in the water and get on with it. This EMTOP submersible pump is rated 370W, half a horsepower, and is designed for clean water duty with a float switch that starts and stops it as the level rises and falls.\u003c\/p\u003e\u003cp\u003eIt lifts to a maximum head of 17 metres and moves up to 100 litres per minute through a 1 inch outlet, a useful combination for transfer and drainage rather than high pressure delivery. The motor is copper wound with thermal protection, and the base, screws and shaft are stainless steel, so the wetted parts stand up to constant immersion. Nine metres of cable let the pump work well below the point where it is plugged in.\u003c\/p\u003e\u003cp\u003eUse it for water tank emptying and cleaning, sump and pit drainage, flooded floors, transferring between tanks and topping up reservoirs.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 220-240V~50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated power:\u003c\/strong\u003e 370W (0.5HP)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum head:\u003c\/strong\u003e 17m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow:\u003c\/strong\u003e 100L\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe diameter:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable length:\u003c\/strong\u003e 9m\u003c\/li\u003e\n\u003cli\u003eCopper wire motor\u003c\/li\u003e\n\u003cli\u003eStainless steel base, screws and shaft\u003c\/li\u003e\n\u003cli\u003eThermal protection\u003c\/li\u003e\n\u003cli\u003eFitted with a float switch\u003c\/li\u003e\n\u003cli\u003eFor clean water\u003c\/li\u003e\n\u003cli\u003eSupplied in a carton box\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180933906503,"sku":"EWPPS03701","price":9320.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EWPPS03701_001064.jpg?v=1788979266"},{"product_id":"emtop-jig-saw-570w-65mm-pendulum-action-ejsw5701","title":"EMTOP Jig Saw 570W 65mm Pendulum Action EJSW5701","description":"\u003cp\u003ePendulum action is what separates a working jig saw from a light one. The EJSW5701 has four steps of it, letting the blade swing forward into the cut for speed in timber or run straight for a clean edge in metal and fine work. Joiners, kitchen fitters and site carpenters are the intended users.\u003c\/p\u003e\u003cp\u003eThe 570W motor drives 800 to 3000 strokes a minute under variable speed control, and cutting capacity reaches 65mm in wood and 8mm in steel, so worktop thickness and light sections are both within range. Three saw blades are supplied, which covers timber and metal from the outset, and a set of spare carbon brushes is included for maintenance.\u003c\/p\u003e\u003cp\u003eIt is at home cutting sink and hob openings, trimming worktop ends and upstands, notching joists and studwork, shaping ply and MDF panels, cutting service holes in ceiling and partition board, and working through non-ferrous sections where a slower stroke is wanted.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eVoltage: 220-240V~50\/60Hz\u003c\/li\u003e\n\u003cli\u003eInput power: 570W\u003c\/li\u003e\n\u003cli\u003eNo-load speed: 800-3000rpm\u003c\/li\u003e\n\u003cli\u003eCutting capacity in wood: 65mm\u003c\/li\u003e\n\u003cli\u003eCutting capacity in steel: 8mm\u003c\/li\u003e\n\u003cli\u003eVariable speed control\u003c\/li\u003e\n\u003cli\u003eFour-step pendulum function\u003c\/li\u003e\n\u003cli\u003eIncludes 3 saw blades\u003c\/li\u003e\n\u003cli\u003eIncludes 1 set of spare carbon brushes\u003c\/li\u003e\n\u003cli\u003eSupplied in a colour box\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180933939271,"sku":"EJSW5701","price":5850.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EJSW5701_000907.jpg?v=1788979268"},{"product_id":"emtop-6-piece-screwdriver-set-slotted-phillips-esst0602","title":"EMTOP 6 Piece Screwdriver Set Slotted Phillips ESST0602","description":"\u003cp\u003eEvery toolbox needs a straightforward set of screwdrivers that gets used every week and does not cost much to replace. The EMTOP ESST0602 is that set: six drivers in the sizes most jobs call for, suitable for households, hardware counters, site kits and general maintenance.\u003c\/p\u003e\n\u003cp\u003eBlades are chrome vanadium steel with a round shank, fitted to a new-design handle shaped to give purchase when a screw needs turning force rather than finesse. Slotted drivers are supplied as SL5.5x5x75, SL5.5x5x100 and SL6.5x6x150, and Phillips as PH1x5x75, PH1x5x100 and PH2x6x150, so both short stubby reach and long blade access are covered in each pattern.\u003c\/p\u003e\n\u003cp\u003ePut them to work on furniture assembly, door and window fittings, appliance covers, light fittings and switch plates, vehicle interior trim, and the general small repairs that come up around a home, shop or workshop. Matching the driver to the screw head properly matters more than force: using the 150mm blades on larger screws and the 75mm ones on small fixings keeps heads intact and saves drilling out damaged fasteners later. The set hangs on a plastic hanger for shop display or wall storage.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e ESST0602\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContents:\u003c\/strong\u003e 6 screwdrivers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Cr-V, round blade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlotted:\u003c\/strong\u003e SL5.5x5x75, SL5.5x5x100, SL6.5x6x150\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhillips:\u003c\/strong\u003e PH1x5x75, PH1x5x100, PH2x6x150\u003c\/li\u003e\n\u003cli\u003eNew design handle\u003c\/li\u003e\n\u003cli\u003eSupplied on a plastic hanger\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180933972039,"sku":"ESST0602","price":650.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/ESST0602_004558.jpg?v=1788979270"},{"product_id":"emtop-hand-saw-for-cutting-timber-and-board-ehas4502","title":"EMTOP Hand Saw for Cutting Timber and Board EHAS4502","description":"\u003cp\u003eThere is still no substitute for a hand saw when one cut is needed and setting up a power tool would take longer than making it. A hand saw works anywhere, needs no supply and gives full control over the last few strokes of a cut.\u003c\/p\u003e\u003cp\u003eCarpenters use one for trimming studs, battens, skirting, sheet material and rough timber on site. Mark the line clearly, start the cut with the blade drawn back against the thumb, then lengthen the stroke and let the weight of the saw do the work.\u003c\/p\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180934398023,"sku":"EHAS4502","price":780.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EHAS4502_000885.jpg?v=1788979281"},{"product_id":"emtop-plastic-hose-mender-1-2-inch-repair-eqcs11211","title":"EMTOP Plastic Hose Mender 1\/2 Inch Repair EQCS11211","description":"\u003cp\u003eA split in the middle of a hose does not mean the hose is finished. Cutting out the damaged section and joining the two good ends with a mender restores a full working length, and this fitting does exactly that for 1\/2\" hose.\u003c\/p\u003e\u003cp\u003eGardeners, nurseries, car wash operators, farms and groundskeeping crews all get through hose, usually because it has been driven over, kinked at the same point once too often, or nicked by a blade. The mender is moulded in plastic, so it will not corrode where it sits in wet soil, and it pushes into both cut ends to be secured with clips or the moulded collars.\u003c\/p\u003e\u003cp\u003eRepairing a hose this way also avoids the awkward middle ground of a length that is too short to reach the far bed but too long to throw away. It is an inexpensive item worth keeping in the shed before it is needed rather than after, particularly on a plot where the hose is dragged across rough ground every day.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSize: 1\/2\"\u003c\/li\u003e\n\u003cli\u003eMaterial: plastic\u003c\/li\u003e\n\u003cli\u003eType: hose mender\u003c\/li\u003e\n\u003cli\u003eSupplied on a paper hanger\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180934791239,"sku":"EQCS11211","price":110.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EQCS11211_001013.jpg?v=1788979284"},{"product_id":"emtop-8-piece-combination-spanner-set-6-19mm-ecss10801","title":"EMTOP 8 Piece Combination Spanner Set 6-19mm ECSS10801","description":"\u003cp\u003eA combination spanner carries an open end on one side and a ring on the other, so the same tool starts a nut quickly and then finishes it with a grip on all six flats. The EMTOP ECSS10801 gathers eight of them for mechanics, plant fitters, plumbers and workshops handling metric fasteners.\u003c\/p\u003e\n\u003cp\u003eSizes supplied are 6mm, 8mm, 10mm, 12mm, 14mm, 15mm, 17mm and 19mm, a spread that covers most vehicle, machinery and general engineering fasteners without duplicating rarely used sizes. Each spanner is fine polished, a finish that wipes clean of oil and grease and shows the size marking clearly when the set is spread on a bench. Having both ends in one tool keeps the kit light for a fitter working away from the workshop.\u003c\/p\u003e\n\u003cp\u003eUse them for vehicle and motorcycle servicing, generator and pump maintenance, agricultural machinery, structural and plant assembly, and general repair work where a socket set cannot reach.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e ECSS10801\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContents:\u003c\/strong\u003e 8 combination spanners\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize range:\u003c\/strong\u003e 6-19mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSizes:\u003c\/strong\u003e 6mm, 8mm, 10mm, 12mm, 14mm, 15mm, 17mm, 19mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e fine polished\u003c\/li\u003e\n\u003cli\u003eSupplied on a plastic hanger\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180935544903,"sku":"ECSS10801","price":1210.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/ECSS10801_004559.jpg?v=1788979288"},{"product_id":"emtop-mitre-box-and-back-saw-set-300mm-11tpi-ehasmb3001","title":"EMTOP Mitre Box and Back Saw Set 300mm 11TPI EHASMB3001","description":"\u003cp\u003eA mitre box and back saw supplied together, giving carpenters, shopfitters and home workshops a simple way to cut repeatable angles in architrave, skirting, beading and picture frame stock. The box guides the blade so the angle comes from the fixture rather than the eye.\u003c\/p\u003e\u003cp\u003eThe saw measures 300mm with 11 teeth per inch, a pitch fine enough to leave a clean edge on softwood, hardwood and plastic mouldings. Its blade is 65Mn steel with heat treated teeth, stiffened along the back so the cut stays straight, and the handle carries a new design for a controlled grip.\u003c\/p\u003e\u003cp\u003eThe plastic mitre box measures 300 x 140 x 80mm and takes the common mitre and square cuts needed for trim work. Clamp or screw it to a bench for the steadiest results when working through a run of lengths. Let the blade find its own line for the first few strokes with the saw held lightly, and the guide slots will take care of the angle from there.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePlastic mitre box with back saw set\u003c\/li\u003e\n\u003cli\u003e1 plastic mitre box, size 300 x 140 x 80mm\u003c\/li\u003e\n\u003cli\u003e1 back saw, size 300mm (12 in), 11TPI\u003c\/li\u003e\n\u003cli\u003eSaw blade material: 65Mn\u003c\/li\u003e\n\u003cli\u003eHeat treated teeth\u003c\/li\u003e\n\u003cli\u003eNew design handle\u003c\/li\u003e\n\u003cli\u003eShrink packed\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180936822855,"sku":"EHASMB3001","price":1340.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EHASMB3001_000887.jpg?v=1788979297"},{"product_id":"emtop-hose-quick-connector-set-3-piece-1-2-eqcs11231","title":"EMTOP Hose Quick Connector Set 3 Piece 1\/2\" EQCS11231","description":"\u003cp\u003eQuick connectors turn a hose into something that can be swapped between a tap, a sprinkler and a spray gun in seconds rather than being screwed and unscrewed each time. This three-piece set gives the basic fittings needed to set up one hose run properly.\u003c\/p\u003e\u003cp\u003eIncluded are two 1\/2\" plastic hose quick connectors, one of them with a water stop that shuts the flow off automatically when the coupling is released, so the tap can be left running while attachments are changed. The third piece is a 3\/4\" tap adaptor supplied with a 1\/2\" to 3\/4\" reducer, which lets the set fit both common outdoor tap thread sizes found on garden and yard taps.\u003c\/p\u003e\u003cp\u003eHouseholds, nurseries, small farms and car wash operations use fittings like these constantly, and having a matched set avoids the leaks that come from mixing brands and thread sizes.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 x 1\/2\" plastic hose quick connector with water stop\u003c\/li\u003e\n\u003cli\u003e1 x 1\/2\" plastic hose quick connector\u003c\/li\u003e\n\u003cli\u003e1 x 3\/4\" tap adaptor with 1\/2\" to 3\/4\" reducer\u003c\/li\u003e\n\u003cli\u003eSupplied on a paper hanger\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180938461255,"sku":"EQCS11231","price":290.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EQCS11231_001014.jpg?v=1788979301"},{"product_id":"emtop-91-piece-tool-set-ehts00911-for-home-and-workshop","title":"EMTOP 91 Piece Tool Set EHTS00911 for Home and Workshop","description":"\u003cp\u003eMost repairs around a house, a shop or a vehicle call for the same handful of tools, and a mid-sized set puts them in one case. The EMTOP EHTS00911 is a 91 piece kit, a sensible starting point for a new home owner, a caretaker or a technician putting together a first working set.\u003c\/p\u003e\u003cp\u003eSets at this count are usually built around a socket and ratchet section with screwdrivers, bits, pliers and hex keys in a fitted case that keeps everything visible. Manufacturer specifications were not published for this model, so confirm the contents list before ordering if a particular tool is essential.\u003c\/p\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180939739207,"sku":"EHTS00911","price":8020.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EHTS00911_004560.jpg?v=1788979303"},{"product_id":"emtop-cordless-impact-drill-20v-55nm-13mm-ecidl72003","title":"EMTOP Cordless Impact Drill 20V 55Nm 13mm ECIDL72003","description":"\u003cp\u003eA 13mm chuck and 55Nm of torque put this machine at the top of the 20V impact drill line. The larger chuck accepts bigger auger, hole saw and masonry bits than a 10mm model will hold, which is the practical limit most buyers hit first.\u003c\/p\u003e\u003cp\u003eTwo mechanical gears give 0-450rpm for high-torque driving and 0-1900rpm for fast drilling, with the hammer mechanism running to 22500 impacts per minute for block and concrete. Twenty-three clutch settings plus drill and hammer positions allow the fastening force to be dialled in precisely, from delicate work in board to structural screws in timber. An integrated work light and an LED charge indicator support the tool in poor light and on long jobs, and the kit includes two 2.0Ah packs, a charger and 50 accessories in a plastic case.\u003c\/p\u003e\u003cp\u003eCarpenters, plumbers, steel and cladding fixers, and general contractors who want one cordless drill to cover everything will find the extra capacity worth having.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: ECIDL72003\u003c\/li\u003e\n\u003cli\u003eVoltage: 20V\u003c\/li\u003e\n\u003cli\u003eNo-load speed: 0-450 \/ 0-1900rpm\u003c\/li\u003e\n\u003cli\u003eMaximum impact rate: 22500\/min\u003c\/li\u003e\n\u003cli\u003eMaximum torque: 55Nm\u003c\/li\u003e\n\u003cli\u003eChuck capacity: 2.0-13mm\u003c\/li\u003e\n\u003cli\u003eTorque settings: 23+1+1\u003c\/li\u003e\n\u003cli\u003eMechanical 2-speed gear\u003c\/li\u003e\n\u003cli\u003eCharge volts: 220-240V~50\/60Hz\u003c\/li\u003e\n\u003cli\u003eIntegrated work light and LED battery power indicator\u003c\/li\u003e\n\u003cli\u003eSupplied with 2 x 2.0Ah battery packs (EBPK20011)\u003c\/li\u003e\n\u003cli\u003eSupplied with 1 charger (EFCR20200)\u003c\/li\u003e\n\u003cli\u003eSupplied with 50 accessories\u003c\/li\u003e\n\u003cli\u003ePacked in a plastic box\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180940886087,"sku":"ECIDL72003","price":12160.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/ECIDL72003_000814.jpg?v=1788979314"},{"product_id":"emtop-pruning-saw-300mm-12in-7tpi-65mn-ehasp3001","title":"EMTOP Pruning Saw 300mm 12in 7TPI 65Mn EHASP3001","description":"\u003cp\u003eHand pruning saw with a 300mm blade, sized for branch work, shrub clearing and general garden maintenance. Gardeners, landscapers and smallholders use a saw of this length where a lopper runs out of capacity but a bow saw is too unwieldy.\u003c\/p\u003e\u003cp\u003eThe blade is 65Mn spring steel with heat treated teeth at 7 teeth per inch, a coarse pitch that clears sawdust quickly instead of packing it into a green cut. Triple teeth, precision ground on three edges, slice fibres from several directions at once, so the saw pulls through wet wood with a light stroke.\u003c\/p\u003e\u003cp\u003eUse it for thinning fruit trees, cutting back overgrown hedging, clearing storm debris and shaping ornamental planting. A clean, fast cut leaves a tidy wound that the tree can close over. Open the kerf with a light backstroke, then let the weight of the saw carry each stroke rather than pressing down into green wood. Undercut a heavy limb first so the bark does not tear as it falls.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSize: 12 in (300mm)\u003c\/li\u003e\n\u003cli\u003eBlade material: 65Mn\u003c\/li\u003e\n\u003cli\u003e7TPI with heat treated teeth\u003c\/li\u003e\n\u003cli\u003eTriple teeth, precision ground on 3 edges\u003c\/li\u003e\n\u003cli\u003eFast cutting action\u003c\/li\u003e\n\u003cli\u003eSupplied in a colour sleeve\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180940918855,"sku":"EHASP3001","price":610.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EHASP3001_000888.jpg?v=1788979315"},{"product_id":"emtop-rotary-hammer-800w-26mm-sds-plus-erhrl802","title":"EMTOP Rotary Hammer 800W 26mm SDS Plus ERHRL802","description":"\u003cp\u003eThe 26mm class covers most anchor and through-hole work on a building site, and the ERHRL802 sits there with 800W behind it. Electricians, plumbers and fixing crews are the usual buyers, along with contractors who need one hammer to drill and to chip.\u003c\/p\u003e\u003cp\u003eImpact energy is 2.5 joules at up to 4000 blows per minute with the spindle turning to 1100rpm, giving 26mm in concrete, 13mm in steel and 30mm in wood. The SDS plus chuck changes bits without a key, and this model adds a keyless quick-change chuck so ordinary round-shank drills and driver bits can be used without a second tool. Three drills and two chisels are supplied, along with a set of spare carbon brushes, in a BMC case.\u003c\/p\u003e\u003cp\u003eUse it for anchors and resin fixings, drilling through walls and slabs for services, setting rail, tray and bracket fixings, and light chipping of tile, render and surplus concrete with the chisel fitted.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eVoltage: 220-240V~50\/60Hz\u003c\/li\u003e\n\u003cli\u003eInput power: 800W\u003c\/li\u003e\n\u003cli\u003eNo-load speed: 0-1100rpm\u003c\/li\u003e\n\u003cli\u003eImpact rate: 0-4000bpm\u003c\/li\u003e\n\u003cli\u003eImpact energy: 2.5J\u003c\/li\u003e\n\u003cli\u003eMaximum drilling capacity in concrete: 26mm\u003c\/li\u003e\n\u003cli\u003eMaximum drilling capacity in steel: 13mm\u003c\/li\u003e\n\u003cli\u003eMaximum drilling capacity in wood: 30mm\u003c\/li\u003e\n\u003cli\u003eSDS plus chuck system\u003c\/li\u003e\n\u003cli\u003eIncludes 1 keyless quick-change chuck\u003c\/li\u003e\n\u003cli\u003eIncludes 3 drills and 2 chisels\u003c\/li\u003e\n\u003cli\u003eIncludes 1 set of spare carbon brushes\u003c\/li\u003e\n\u003cli\u003eSupplied in a BMC case\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180940951623,"sku":"ERHRL802","price":13060.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/ERHRL802_001015.jpg?v=1788979319"}],"url":"https:\/\/ahihqtraders.com\/collections\/tools-equipment.oembed?page=16","provider":"AHIHQ Traders","version":"1.0","type":"link"}