{"title":"Water Pumps","description":"\u003cp\u003eWater pumps for domestic, garden and site use.\u003c\/p\u003e","products":[{"product_id":"emtop-4-inch-deep-well-pump-370w-0-5hp-48m-head-ewppd03701","title":"EMTOP 4 Inch Deep Well Pump 370W 0.5HP 48m Head EWPPD03701","description":"\u003cp\u003eHouseholds and smallholdings drawing from a borehole need a pump sized to the depth of water, not simply the biggest available. This EMTOP 4 inch deep well pump is the entry point of the range at 370W, half a horsepower, lifting to a maximum head of 48 metres.\u003c\/p\u003e\u003cp\u003eWater passes through a six stage impeller, each stage adding pressure so the pump can push a steady flow up a long column rather than relying on one wheel. Maximum flow is 6.0 cubic metres per hour through a 1-1\/4 inch discharge. The motor is wound with copper wire and the pump body is stainless steel, a combination chosen for continuous immersion in a 4 inch bore. Twenty metres of cable are fitted, so the wellhead connection can be made without an early joint. The control box is not included.\u003c\/p\u003e\u003cp\u003eUse it for domestic boreholes, small farm and irrigation supply, livestock watering, school and clinic water systems, and topping up storage tanks.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 220-240V~50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated power:\u003c\/strong\u003e 370W (0.5HP)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum head:\u003c\/strong\u003e 48m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow:\u003c\/strong\u003e 6.0 cubic metres per hour\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe diameter:\u003c\/strong\u003e 1-1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWell pump body:\u003c\/strong\u003e 4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpeller:\u003c\/strong\u003e 6 stage\u003c\/li\u003e\n\u003cli\u003eCopper wire motor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump body:\u003c\/strong\u003e stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable length:\u003c\/strong\u003e 20m\u003c\/li\u003e\n\u003cli\u003eControl box not included\u003c\/li\u003e\n\u003cli\u003eSupplied in a carton box\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180909592647,"sku":"EWPPD03701","price":16880.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EWPPD03701_001057.jpg?v=1788978936"},{"product_id":"emtop-4-inch-deep-well-pump-550w-0-75hp-64m-head-ewppd05501","title":"EMTOP 4 Inch Deep Well Pump 550W 0.75HP 64m Head EWPPD05501","description":"\u003cp\u003eWhere the standing water level sits deeper than a half horsepower pump can comfortably serve, this EMTOP 4 inch deep well pump steps in at 550W, three quarters of a horsepower, with a maximum head of 64 metres. It is a practical middle size for domestic and light agricultural boreholes.\u003c\/p\u003e\u003cp\u003eEight impeller stages build the pressure needed for that lift while holding a maximum flow of 6.0 cubic metres per hour, delivered through a 1-1\/4 inch pipe connection. The stainless steel pump body resists corrosion during permanent immersion, and the copper wound motor is built for the long running hours that tank filling demands. A 20 metre cable is fitted from the factory. The control box is supplied separately.\u003c\/p\u003e\u003cp\u003eTypical installations include homestead boreholes, guest houses and rentals, small scale irrigation, dairy and poultry units, and institutional water supply where a storage tank is filled once or twice a day. Match the pump to the bore depth and yield before installation.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 220-240V~50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated power:\u003c\/strong\u003e 550W (0.75HP)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum head:\u003c\/strong\u003e 64m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow:\u003c\/strong\u003e 6.0 cubic metres per hour\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe diameter:\u003c\/strong\u003e 1-1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWell pump body:\u003c\/strong\u003e 4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpeller:\u003c\/strong\u003e 8 stage\u003c\/li\u003e\n\u003cli\u003eCopper wire motor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump body:\u003c\/strong\u003e stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable length:\u003c\/strong\u003e 20m\u003c\/li\u003e\n\u003cli\u003eControl box not included\u003c\/li\u003e\n\u003cli\u003eSupplied in a carton box\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180911263815,"sku":"EWPPD05501","price":18510.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EWPPD05501_001058.jpg?v=1788978962"},{"product_id":"emtop-4-inch-deep-well-pump-750w-1hp-82m-head-ewppd07501","title":"EMTOP 4 Inch Deep Well Pump 750W 1HP 82m Head EWPPD07501","description":"\u003cp\u003eOne horsepower is the size most commonly specified for a family borehole feeding an elevated tank, and this EMTOP 4 inch deep well pump sits exactly there. Rated 750W, it lifts to a maximum head of 82 metres, enough for a deeper bore or a tank stand well above the wellhead.\u003c\/p\u003e\u003cp\u003eTen impeller stages generate that pressure while maintaining a maximum flow of 6.0 cubic metres per hour through a 1-1\/4 inch discharge. Construction follows the rest of the range: a copper wire motor, a stainless steel pump body sized for a 4 inch bore, and 20 metres of cable already fitted so the installer has slack to work with at the head. A control box is required and is not included.\u003c\/p\u003e\u003cp\u003eIt is suited to residential boreholes, rental and apartment blocks, farms running drip or sprinkler lines, schools, clinics and small commercial premises. Confirm the bore yield and dynamic water level so the pump is not run dry.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 220-240V~50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated power:\u003c\/strong\u003e 750W (1.0HP)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum head:\u003c\/strong\u003e 82m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow:\u003c\/strong\u003e 6.0 cubic metres per hour\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe diameter:\u003c\/strong\u003e 1-1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWell pump body:\u003c\/strong\u003e 4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpeller:\u003c\/strong\u003e 10 stage\u003c\/li\u003e\n\u003cli\u003eCopper wire motor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump body:\u003c\/strong\u003e stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable length:\u003c\/strong\u003e 20m\u003c\/li\u003e\n\u003cli\u003eControl box not included\u003c\/li\u003e\n\u003cli\u003eSupplied in a carton box\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180927942727,"sku":"EWPPD07501","price":19850.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EWPPD07501_001059.jpg?v=1788979183"},{"product_id":"emtop-4-inch-deep-well-pump-1100w-1-5hp-112m-ewppd11001","title":"EMTOP 4 Inch Deep Well Pump 1100W 1.5HP 112m EWPPD11001","description":"\u003cp\u003eDeeper boreholes and long uphill delivery runs need real pressure behind the water. Rated 1100W, or 1.5 horsepower, this EMTOP 4 inch deep well pump reaches a maximum head of 112 metres, which covers most residential and light commercial bores in the region.\u003c\/p\u003e\u003cp\u003eFourteen impeller stages produce that lift, each adding its share of pressure, while maximum flow stays at 6.0 cubic metres per hour through the 1-1\/4 inch outlet. The motor is copper wound and the pump body is stainless, chosen for permanent immersion in a 4 inch casing, and 20 metres of cable come fitted so the installer can reach the wellhead without an early splice. Order the matching control box separately.\u003c\/p\u003e\u003cp\u003eConsider it for deep domestic boreholes, apartment blocks and gated developments, farm irrigation, greenhouses, hotels and lodges, and any site where water must climb to a high tank. Size the pump against the tested yield of the bore before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 220-240V~50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated power:\u003c\/strong\u003e 1100W (1.5HP)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum head:\u003c\/strong\u003e 112m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow:\u003c\/strong\u003e 6.0 cubic metres per hour\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe diameter:\u003c\/strong\u003e 1-1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWell pump body:\u003c\/strong\u003e 4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpeller:\u003c\/strong\u003e 14 stage\u003c\/li\u003e\n\u003cli\u003eCopper wire motor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump body:\u003c\/strong\u003e stainless\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable length:\u003c\/strong\u003e 20m\u003c\/li\u003e\n\u003cli\u003eControl box not included\u003c\/li\u003e\n\u003cli\u003eSupplied in a carton box\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180928860231,"sku":"EWPPD11001","price":23190.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EWPPD11001_001060.jpg?v=1788979205"},{"product_id":"emtop-4-inch-deep-well-pump-1500w-2hp-135m-ewppd15001","title":"EMTOP 4 Inch Deep Well Pump 1500W 2HP 135m EWPPD15001","description":"\u003cp\u003eAt the top of the EMTOP 4 inch borehole range sits this 1500W pump, two horsepower, with a maximum head of 135 metres. It is the choice when the water table is low, the tank stand is high, or the delivery line runs a long way uphill from the wellhead.\u003c\/p\u003e\u003cp\u003eSeventeen impeller stages build the column pressure required for that lift, with maximum flow held at 6.0 cubic metres per hour through a 1-1\/4 inch discharge. The motor uses copper windings and the pump body is stainless steel for continuous submerged duty, and 20 metres of cable are supplied on the unit. The control box is ordered separately and should be matched to this model.\u003c\/p\u003e\u003cp\u003eIt is aimed at deep boreholes, farms and irrigation schemes, lodges and institutions, water vending points and multi-tenant developments. As with any borehole pump, install it above the pump intake level recommended for the bore and protect it against dry running.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 220-240V~50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated power:\u003c\/strong\u003e 1500W (2HP)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum head:\u003c\/strong\u003e 135m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow:\u003c\/strong\u003e 6.0 cubic metres per hour\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe diameter:\u003c\/strong\u003e 1-1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWell pump body:\u003c\/strong\u003e 4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpeller:\u003c\/strong\u003e 17 stage\u003c\/li\u003e\n\u003cli\u003eCopper wire motor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump body:\u003c\/strong\u003e stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable length:\u003c\/strong\u003e 20m\u003c\/li\u003e\n\u003cli\u003eControl box not included\u003c\/li\u003e\n\u003cli\u003eSupplied in a carton box\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180930531399,"sku":"EWPPD15001","price":27410.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EWPPD15001_001061.jpg?v=1788979227"},{"product_id":"emtop-submersible-sewage-pump-for-dirty-water-ewppq07508","title":"EMTOP Submersible Sewage Pump for Dirty Water EWPPQ07508","description":"\u003cp\u003eSewage and waste water carry solids that would block a clean-water pump, so a pump built for the duty uses a wider passage and an impeller designed to pass what comes through it.\u003c\/p\u003e\u003cp\u003eThe unit sits in the liquid it is moving, which keeps it primed and quiet, and lifts the contents out through a hose or pipe to the discharge point.\u003c\/p\u003e\u003cp\u003eTypical duties include septic and holding pits, drainage sumps, basement and pit dewatering after heavy rain, and construction sites where dirty water has to be cleared before work can resume.\u003c\/p\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180932300871,"sku":"EWPPQ07508","price":7850.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EWPPQ07508_001063.jpg?v=1788979245"},{"product_id":"emtop-submersible-clean-water-pump-370w-0-5hp-ewpps03701","title":"EMTOP Submersible Clean Water Pump 370W 0.5HP EWPPS03701","description":"\u003cp\u003eEmptying a sump, a tank or a flooded basement is a job for a pump that can sit in the water and get on with it. This EMTOP submersible pump is rated 370W, half a horsepower, and is designed for clean water duty with a float switch that starts and stops it as the level rises and falls.\u003c\/p\u003e\u003cp\u003eIt lifts to a maximum head of 17 metres and moves up to 100 litres per minute through a 1 inch outlet, a useful combination for transfer and drainage rather than high pressure delivery. The motor is copper wound with thermal protection, and the base, screws and shaft are stainless steel, so the wetted parts stand up to constant immersion. Nine metres of cable let the pump work well below the point where it is plugged in.\u003c\/p\u003e\u003cp\u003eUse it for water tank emptying and cleaning, sump and pit drainage, flooded floors, transferring between tanks and topping up reservoirs.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 220-240V~50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated power:\u003c\/strong\u003e 370W (0.5HP)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum head:\u003c\/strong\u003e 17m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow:\u003c\/strong\u003e 100L\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe diameter:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable length:\u003c\/strong\u003e 9m\u003c\/li\u003e\n\u003cli\u003eCopper wire motor\u003c\/li\u003e\n\u003cli\u003eStainless steel base, screws and shaft\u003c\/li\u003e\n\u003cli\u003eThermal protection\u003c\/li\u003e\n\u003cli\u003eFitted with a float switch\u003c\/li\u003e\n\u003cli\u003eFor clean water\u003c\/li\u003e\n\u003cli\u003eSupplied in a carton box\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180933906503,"sku":"EWPPS03701","price":9320.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EWPPS03701_001064.jpg?v=1788979266"},{"product_id":"emtop-submersible-clean-water-pump-750w-1hp-ewpps07501","title":"EMTOP Submersible Clean Water Pump 750W 1HP EWPPS07501","description":"\u003cp\u003eStepping up from the half horsepower model, this EMTOP submersible pump is rated 750W and pushes water to a maximum head of 32 metres at up to 120 litres per minute. It is the size to choose when the discharge point is well above the tank or the run of hose is long.\u003c\/p\u003e\u003cp\u003eThe pump is intended for clean water and comes with a float switch, so it can be left to empty a tank and switch itself off before running dry. Thermal protection guards the copper wound motor against overheating, and the base, screws and shaft are stainless steel for long immersion. A 1 inch outlet takes standard hose or pipe fittings, and 9 metres of cable give reach down into a deep tank or pit.\u003c\/p\u003e\u003cp\u003eTypical uses include tank cleaning and transfer, borehole and reservoir top-up, drainage of pits and basements, construction site water clearing, and pumping between storage tanks on farms and compounds.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 220-240V~50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated power:\u003c\/strong\u003e 750W (1.0HP)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum head:\u003c\/strong\u003e 32m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow:\u003c\/strong\u003e 120L\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe diameter:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable length:\u003c\/strong\u003e 9m\u003c\/li\u003e\n\u003cli\u003eCopper wire motor\u003c\/li\u003e\n\u003cli\u003eStainless steel base, screws and shaft\u003c\/li\u003e\n\u003cli\u003eThermal protection\u003c\/li\u003e\n\u003cli\u003eFitted with a float switch\u003c\/li\u003e\n\u003cli\u003eFor clean water\u003c\/li\u003e\n\u003cli\u003eSupplied in a carton box\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180945473607,"sku":"EWPPS07501","price":13710.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EWPPS07501_001065.jpg?v=1788979407"},{"product_id":"emtop-deep-well-pump-control-box-for-ewppd03701-ewsbd03701","title":"EMTOP Deep Well Pump Control Box for EWPPD03701 EWSBD03701","description":"\u003cp\u003eA submersible borehole pump is supplied without its control box, and the box is not optional: it starts the motor, carries the run capacitor and protects the winding. This EMTOP control box is the matching unit for the EWPPD03701 deep well pump.\u003c\/p\u003e\u003cp\u003eIt runs on a 220-240V, 50Hz supply and includes over-current protection, which trips the circuit if the motor begins drawing more than it should because of a locked rotor, a failing capacitor or a supply fault. That protection is what stands between a stalled pump and a burnt winding fifty metres down a bore, where any repair means pulling the whole column of pipe.\u003c\/p\u003e\u003cp\u003eMount it in the pump house or a sheltered position at the wellhead, wired between the supply and the pump cable. It is the correct replacement where an existing box has been damaged by lightning or a supply surge, and the item to add to the order when a new EWPPD03701 is installed.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated power supply:\u003c\/strong\u003e 220-240V~50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatched pump:\u003c\/strong\u003e EWPPD03701\u003c\/li\u003e\n\u003cli\u003eOver-current protection\u003c\/li\u003e\n\u003cli\u003eSupplied in a carton box\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180945735751,"sku":"EWSBD03701","price":1480.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EWSBD03701_001067.jpg?v=1788979426"},{"product_id":"emtop-deep-well-pump-control-box-for-ewppd05501-ewsbd05501","title":"EMTOP Deep Well Pump Control Box for EWPPD05501 EWSBD05501","description":"\u003cp\u003eEvery EMTOP submersible borehole pump needs a control box matched to its motor, and this one is built for the EWPPD05501. It houses the starting gear for the pump and gives the installer a single point at the surface for switching and protection.\u003c\/p\u003e\u003cp\u003eThe box works from a 220-240V, 50Hz supply and provides over-current protection, cutting power if the motor draws abnormal current. That is the safeguard against a seized impeller, a dropped phase or a sagging supply quietly cooking a motor that nobody can see. Because the electronics sit above ground, a fault in the box can be dealt with in minutes rather than by lifting the pump.\u003c\/p\u003e\u003cp\u003eOrder it alongside a new EWPPD05501 installation, or as the correct replacement where the original box has been damaged by surge, water ingress or age. Fit it in a dry, ventilated position and keep the terminals covered.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated power supply:\u003c\/strong\u003e 220-240V~50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatched pump:\u003c\/strong\u003e EWPPD05501\u003c\/li\u003e\n\u003cli\u003eOver-current protection\u003c\/li\u003e\n\u003cli\u003eSupplied in a carton box\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180946489415,"sku":"EWSBD05501","price":1510.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EWSBD05501_001068.jpg?v=1788979447"},{"product_id":"emtop-deep-well-pump-control-box-for-ewppd07501-ewsbd07501","title":"EMTOP Deep Well Pump Control Box for EWPPD07501 EWSBD07501","description":"\u003cp\u003eThis is the surface control box specified for the EMTOP EWPPD07501 deep well pump. Borehole pumps ship without one, so it should go on the order with the pump, and it is equally the part to replace when an existing box has failed.\u003c\/p\u003e\u003cp\u003ePowered from 220-240V at 50Hz, it starts the submerged motor and monitors what the motor draws, tripping on over-current before a fault has time to damage the winding. Common causes are a jammed impeller, sand ingress, a weak capacitor or a poor supply, and all of them are cheaper to catch at the surface than to discover when the pump is hauled up.\u003c\/p\u003e\u003cp\u003eInstall it in the pump house or another sheltered spot close to the wellhead, wired between the incoming supply and the pump cable, with the enclosure kept dry and the cable glands properly made off. Use it only with the pump model it is matched to.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated power supply:\u003c\/strong\u003e 220-240V~50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatched pump:\u003c\/strong\u003e EWPPD07501\u003c\/li\u003e\n\u003cli\u003eOver-current protection\u003c\/li\u003e\n\u003cli\u003eSupplied in a carton box\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180947439687,"sku":"EWSBD07501","price":1690.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EWSBD07501_001069.jpg?v=1788979466"},{"product_id":"emtop-deep-well-pump-control-box-for-ewppd11001-ewsbd11001","title":"EMTOP Deep Well Pump Control Box for EWPPD11001 EWSBD11001","description":"\u003cp\u003eMatched to the EMTOP EWPPD11001 deep well pump, this control box provides the starting and protection gear that a submersible motor cannot carry inside the bore. It is a required part of the installation rather than an accessory.\u003c\/p\u003e\u003cp\u003eSupply is 220-240V at 50Hz, and the box includes over-current protection that interrupts power when the motor begins pulling more current than its rating allows. On a heavier pump like the 1100W unit, that margin matters: a fault left running will overheat the winding long before anyone at the tap notices a change in flow.\u003c\/p\u003e\u003cp\u003eKeep the box in a dry, ventilated position near the wellhead, with proper glanding and earthing, and leave the cover secured in normal use. It also serves as the replacement box where lightning, a supply surge or water ingress has taken out the original on an existing EWPPD11001 installation.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated power supply:\u003c\/strong\u003e 220-240V~50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatched pump:\u003c\/strong\u003e EWPPD11001\u003c\/li\u003e\n\u003cli\u003eOver-current protection\u003c\/li\u003e\n\u003cli\u003eSupplied in a carton box\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180948226119,"sku":"EWSBD11001","price":1820.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EWSBD11001_001070.jpg?v=1788979485"},{"product_id":"emtop-deep-well-pump-control-box-for-ewppd15001-ewsbd15001","title":"EMTOP Deep Well Pump Control Box for EWPPD15001 EWSBD15001","description":"\u003cp\u003eThe largest pump in the EMTOP borehole range takes this control box. Built for the EWPPD15001, it sits at the surface and does the work the submerged motor cannot do for itself: starting the pump and watching what it draws.\u003c\/p\u003e\u003cp\u003eIt runs from a 220-240V, 50Hz supply and trips on over-current, protecting the winding against a locked rotor, a failed capacitor or a supply problem. On a two horsepower installation the pump is often set deep, so anything that avoids pulling the rising main pays for itself the first time it acts.\u003c\/p\u003e\u003cp\u003eWire it between the incoming supply and the pump cable in a dry, sheltered enclosure at the wellhead, with correct earthing and cable glands. Fit it as part of a new EWPPD15001 installation or as the direct replacement for a damaged original. Use only with the pump model it is matched to.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated power supply:\u003c\/strong\u003e 220-240V~50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatched pump:\u003c\/strong\u003e EWPPD15001\u003c\/li\u003e\n\u003cli\u003eOver-current protection\u003c\/li\u003e\n\u003cli\u003eSupplied in a carton box\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180948848711,"sku":"EWSBD15001","price":1900.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EWSBD15001_001071.jpg?v=1788979504"},{"product_id":"emtop-automatic-pump-control-10a-ip65-1-inch-eapc1001","title":"EMTOP Automatic Pump Control 10A IP65 1 Inch EAPC1001","description":"\u003cp\u003eFitting a pressure controller turns an ordinary booster pump into an automatic water system. This EMTOP automatic pump control starts the pump when a tap opens and stops it when demand ends, removing the need for a pressure vessel and a separate switch, and cutting the pump out if flow is lost.\u003c\/p\u003e\u003cp\u003eIt works on a 220-240V supply at 50\/60Hz, starts at 1.5 bar and handles pumps drawing up to 1100W, with a maximum current of 10A and a maximum working pressure of 10 bar. Connections are 1 inch by 1 inch, so it fits inline on the delivery side of most domestic booster pumps. The housing is rated IP65 against dust and water jets, which matters for a unit that usually lives in a pump house or an outdoor enclosure.\u003c\/p\u003e\u003cp\u003eUse it on domestic pressure boosting, tank to house delivery, shower and instant heater supply, small irrigation lines and light commercial water systems.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated voltage:\u003c\/strong\u003e 220-240V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency:\u003c\/strong\u003e 50\/60Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStarting pressure:\u003c\/strong\u003e 1.5 bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum power allowed:\u003c\/strong\u003e 1100W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum current:\u003c\/strong\u003e 10A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum pressure:\u003c\/strong\u003e 10 bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe diameter:\u003c\/strong\u003e 1 inch x 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection degree:\u003c\/strong\u003e IP65\u003c\/li\u003e\n\u003cli\u003eSupplied in a colour box\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180971884615,"sku":"EAPC1001","price":4250.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EAPC1001_000769.jpg?v=1788979893"},{"product_id":"emtop-automatic-water-pump-pressure-controller-eapc1201","title":"EMTOP Automatic Water Pump Pressure Controller EAPC1201","description":"\u003cp\u003eConstant pressure at the tap, without a bladder tank taking up half the pump house, is what a controller like this delivers. The EMTOP EAPC1201 senses flow and pressure on the delivery line, starting the pump on demand and shutting it down when the taps close or the supply runs dry.\u003c\/p\u003e\u003cp\u003eElectrically it takes 220-240V at 50\/60Hz and will switch pumps drawing up to 1100W, with a 10A maximum current. Starting pressure is set at 1.5 bar and the unit is rated to 10 bar maximum, with 1 inch by 1 inch connections that thread straight into a standard delivery line. An IP65 enclosure keeps dust and splashing water out of the electronics in an exposed pump house.\u003c\/p\u003e\u003cp\u003eFit it to household booster sets, tank-fed plumbing that needs more pressure upstairs, borehole surface pumps, car wash and workshop supply, and small irrigation systems where automatic operation saves someone switching the pump by hand.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated voltage:\u003c\/strong\u003e 220-240V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency:\u003c\/strong\u003e 50\/60Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStarting pressure:\u003c\/strong\u003e 1.5 bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum power allowed:\u003c\/strong\u003e 1100W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum current:\u003c\/strong\u003e 10A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum pressure:\u003c\/strong\u003e 10 bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe diameter:\u003c\/strong\u003e 1 inch x 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection degree:\u003c\/strong\u003e IP65\u003c\/li\u003e\n\u003cli\u003eSupplied in a colour box\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180971917383,"sku":"EAPC1201","price":4250.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EAPC1201_000770.jpg?v=1788979917"},{"product_id":"emtop-submersible-water-pump-for-clean-water-ewpps05501","title":"EMTOP Submersible Water Pump for Clean Water EWPPS05501","description":"\u003cp\u003eSubmersible pumps work from inside the water they are moving, which keeps them primed, quiet and cool without the priming routine an above-ground pump needs.\u003c\/p\u003e\u003cp\u003eThe unit is lowered into the tank, sump or well and discharges through a hose or riser pipe to the storage tank or supply point above.\u003c\/p\u003e\u003cp\u003eHouseholds, farms, sites and estates use them for filling storage tanks, drawing from underground tanks and wells, transferring between tanks and clearing standing water. Keep the pump clear of silt at the bottom of the chamber so it draws clean water rather than sediment.\u003c\/p\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43180985745479,"sku":"EWPPS05501","price":17620.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EWPPS05501_004515.jpg?v=1788980161"},{"product_id":"emtop-diesel-water-pump-4-inch-1420l-min-edwp10011","title":"EMTOP Diesel Water Pump 4 Inch 1420L\/min EDWP10011","description":"\u003cp\u003eMoving large volumes of water where there is no mains electricity is the job this pump was built for. The EMTOP EDWP10011 is a 4 inch diesel transfer pump with 100mm suction and discharge ports, aimed at farmers, irrigation contractors, borehole crews and site teams clearing flooded excavations.\u003c\/p\u003e\n\u003cp\u003eDrive comes from an 8.3HP diesel engine of 418cc with recoil starting, chosen for long working days and the lower running cost of diesel over petrol. Flow reaches 1420 litres per minute, the pump lifts to a 25m head and draws from as deep as 7m, so it copes with a river bank, a dam or a sump well below the machine. A 12.5L fuel tank keeps refuelling stops down during a long transfer.\u003c\/p\u003e\n\u003cp\u003eCommon applications include irrigating smallholdings and greenhouses, filling and emptying storage tanks, dewatering foundations and trenches after rain, and general water transfer around farms, quarries and construction sites.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e EDWP10011\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuction and discharge port diameter:\u003c\/strong\u003e 100mm, 4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow:\u003c\/strong\u003e 1420L\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum head lift:\u003c\/strong\u003e 25m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum suction head:\u003c\/strong\u003e 7m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine:\u003c\/strong\u003e 8.3HP diesel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplacement:\u003c\/strong\u003e 418cc\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel tank:\u003c\/strong\u003e 12.5L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStarting:\u003c\/strong\u003e recoil\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43181248708679,"sku":"EDWP10011","price":85170.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EDWP10011_000847.jpg?v=1788986691"},{"product_id":"emtop-diesel-water-pump-3-inch-1000l-min-edwp8011","title":"EMTOP Diesel Water Pump 3 Inch 1000L\/min EDWP8011","description":"\u003cp\u003eWhere a larger-bore machine is more pump than the job needs, this 3 inch diesel unit gives most of the head with a smaller, lighter engine. The EMTOP EDWP8011 has 80mm suction and discharge ports and suits farmers, plumbers, tank contractors and site crews who move water daily away from a mains socket.\u003c\/p\u003e\n\u003cp\u003eA 5.5HP diesel engine of 296cc turns the impeller, started by recoil pull. Output peaks at 1000 litres per minute with a 28m maximum head lift, higher than the larger-bore model, so it pushes water further uphill to a tank or a distant field. Suction head reaches 7m, and the 12.5L tank supports a full shift of pumping between fills.\u003c\/p\u003e\n\u003cp\u003ePut it to work on drip and furrow irrigation, filling elevated storage tanks, emptying ponds and septic sumps, washing down plant and yards, and clearing standing water from foundations and basements after heavy rain. Because the engine runs on diesel rather than petrol, fuel is easier to store on a farm alongside a tractor supply and the pump is cheaper to keep working through a long dry season.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e EDWP8011\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuction and discharge port diameter:\u003c\/strong\u003e 80mm, 3 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow:\u003c\/strong\u003e 1000L\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum head lift:\u003c\/strong\u003e 28m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum suction head:\u003c\/strong\u003e 7m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine:\u003c\/strong\u003e 5.5HP diesel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplacement:\u003c\/strong\u003e 296cc\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel tank:\u003c\/strong\u003e 12.5L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStarting:\u003c\/strong\u003e recoil\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43181248806983,"sku":"EDWP8011","price":67260.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EDWP8011_000848.jpg?v=1788986715"},{"product_id":"emtop-petrol-water-pump-2-inch-550l-min-egwp5012","title":"EMTOP Petrol Water Pump 2 Inch 550L\/min EGWP5012","description":"\u003cp\u003eA 2 inch pump is the one that gets carried up a bank, dropped beside a stream and started in a minute. The EMTOP EGWP5012 has 50mm suction and discharge ports and suits smallholders, plumbers, tank cleaners, car wash operators and site teams handling modest volumes at good pressure.\u003c\/p\u003e\n\u003cp\u003eA 7.0HP petrol engine of 208cc drives the impeller with recoil starting. Flow reaches 550 litres per minute against a 32m maximum head, so water can be pushed well uphill to a raised tank rather than merely moved sideways. Suction head is 8m, letting the pump draw from a deep sump or a low river without repositioning. The 3.6L tank keeps the machine light and quick to refuel.\u003c\/p\u003e\n\u003cp\u003eUse it for garden and greenhouse irrigation, filling and draining storage tanks, emptying swimming pools and fish ponds, washing vehicles and yards, and clearing water from trenches and flooded ground. Petrol starting is easier on a cold morning than diesel, which makes this the practical choice where the pump is used in short bursts rather than run all day.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e EGWP5012\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuction and discharge port diameter:\u003c\/strong\u003e 50mm, 2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow:\u003c\/strong\u003e 550L\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum head lift:\u003c\/strong\u003e 32m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum suction head:\u003c\/strong\u003e 8m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine:\u003c\/strong\u003e 7.0HP petrol\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplacement:\u003c\/strong\u003e 208cc\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel tank:\u003c\/strong\u003e 3.6L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStarting:\u003c\/strong\u003e recoil\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43181258768455,"sku":"EGWP5012","price":20690.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EGWP5012_000874.jpg?v=1788987424"},{"product_id":"emtop-petrol-water-pump-3-inch-1000l-min-egwp8012","title":"EMTOP Petrol Water Pump 3 Inch 1000L\/min EGWP8012","description":"\u003cp\u003eDoubling the port size roughly doubles the volume, and that is why contractors keep a 3 inch pump on the lorry. The EMTOP EGWP8012 has 80mm suction and discharge ports and is built for farmers, irrigation crews, borehole and tank installers and builders clearing water from open ground.\u003c\/p\u003e\n\u003cp\u003eThe same 7.0HP petrol engine of 208cc used on the smaller unit drives this pump, so the 32m maximum head is retained while flow rises to 1000 litres per minute. Recoil starting keeps the machine simple with no battery to charge, suction reaches 8m below the pump, and the 3.6L fuel tank stays small enough that the unit remains portable by two people.\u003c\/p\u003e\n\u003cp\u003eIt handles field and orchard irrigation, filling raised storage tanks and water bowsers, emptying dams, ponds and pits, washing down plant, yards and vehicles, and drainage of foundations and trenches during the rains. Fitting the shortest practical suction hose and keeping the strainer clear of silt will help the pump hold its rated flow on site.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e EGWP8012\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuction and discharge port diameter:\u003c\/strong\u003e 80mm, 3 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow:\u003c\/strong\u003e 1000L\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum head lift:\u003c\/strong\u003e 32m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum suction head:\u003c\/strong\u003e 8m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine:\u003c\/strong\u003e 7.0HP petrol\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplacement:\u003c\/strong\u003e 208cc\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel tank:\u003c\/strong\u003e 3.6L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStarting:\u003c\/strong\u003e recoil\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43181258932295,"sku":"EGWP8012","price":22850.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EGWP8012_000875.jpg?v=1788987442"},{"product_id":"emtop-centrifugal-water-pump-750w-1hp-30m-head-ewppc07501","title":"EMTOP Centrifugal Water Pump 750W 1HP 30m Head EWPPC07501","description":"\u003cp\u003eA surface centrifugal pump is the workhorse of tank-to-house plumbing, and this EMTOP model at 750W covers most domestic duties. It draws from a tank, sump or shallow well and delivers a strong, steady flow, reaching a maximum head of 30 metres.\u003c\/p\u003e\u003cp\u003eFlow runs to 110 litres per minute, the highest in this group of surface pumps, with a maximum suction lift of 8 metres and 1 inch by 1 inch connections on both sides. The impeller is stainless steel and the shaft is a stainless welded 304 and 45# assembly, while the electrophoresis coated pump body resists rust in a damp pump house. The motor is copper wound and a 0.3 metre cable is fitted for connection to a local socket or isolator.\u003c\/p\u003e\u003cp\u003eIt suits underground tank to overhead tank transfer, house pressure boosting, garden and small irrigation lines, car washing and general water movement on plots, farms and small commercial premises.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e centrifugal pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 220-240V~50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated power:\u003c\/strong\u003e 750W (1.0HP)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum head:\u003c\/strong\u003e 30m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow:\u003c\/strong\u003e 110L\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum suction:\u003c\/strong\u003e 8m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe diameter:\u003c\/strong\u003e 1 inch x 1 inch\u003c\/li\u003e\n\u003cli\u003eCopper wire motor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShaft:\u003c\/strong\u003e stainless steel welded, 304 and 45#\u003c\/li\u003e\n\u003cli\u003eElectrophoresis pump body\u003c\/li\u003e\n\u003cli\u003eStainless steel impeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable length:\u003c\/strong\u003e 0.3m\u003c\/li\u003e\n\u003cli\u003eSupplied in a carton box\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43181260734535,"sku":"EWPPC07501","price":11640.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EWPPC07501_001056.jpg?v=1788987555"},{"product_id":"emtop-self-priming-jet-pump-750w-1hp-51m-head-ewppj07501","title":"EMTOP Self Priming Jet Pump 750W 1HP 51m Head EWPPJ07501","description":"\u003cp\u003eWhere the water sits below the pump and the delivery has to climb, a jet pump earns its place. This EMTOP self-priming jet pump is rated 750W and reaches a maximum head of 51 metres, considerably higher than a plain centrifugal unit of the same power, with a maximum suction lift of 9 metres.\u003c\/p\u003e\u003cp\u003eBeing self-priming, it clears air from the suction line and re-establishes flow after the level drops or the line is opened, which saves the routine of priming by hand every morning. Flow is 55 litres per minute through 1 inch by 1 inch connections. Inside, a stainless steel impeller runs on a stainless welded 304 and 45# shaft, the body is electrophoresis coated against corrosion, and the motor is copper wound. A 0.3 metre cable is fitted.\u003c\/p\u003e\u003cp\u003eUse it on shallow wells and sumps, underground tank supply, pressure boosting for multi-storey houses, irrigation lines and livestock watering where lift matters more than volume.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e self-priming jet pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 220-240V~50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated power:\u003c\/strong\u003e 750W (1.0HP)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum head:\u003c\/strong\u003e 51m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow:\u003c\/strong\u003e 55L\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum suction:\u003c\/strong\u003e 9m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe diameter:\u003c\/strong\u003e 1 inch x 1 inch\u003c\/li\u003e\n\u003cli\u003eCopper wire motor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShaft:\u003c\/strong\u003e stainless steel welded, 304 and 45#\u003c\/li\u003e\n\u003cli\u003eElectrophoresis pump body\u003c\/li\u003e\n\u003cli\u003eStainless steel impeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable length:\u003c\/strong\u003e 0.3m\u003c\/li\u003e\n\u003cli\u003eSupplied in a carton box\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43181261127751,"sku":"EWPPJ07501","price":17250.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EWPPJ07501_001062.jpg?v=1788987579"},{"product_id":"emtop-peripheral-water-pump-370w-0-5hp-35m-head-ewppv03701","title":"EMTOP Peripheral Water Pump 370W 0.5HP 35m Head EWPPV03701","description":"\u003cp\u003eSmall households and single tank installations rarely need a big pump, they need pressure. A peripheral pump delivers exactly that, and this EMTOP model at 370W, half a horsepower, reaches a maximum head of 35 metres from a compact and easily mounted body.\u003c\/p\u003e\u003cp\u003eFlow is 35 litres per minute with a maximum suction of 8 metres, through 1 inch by 1 inch connections. The impeller is brass, a hard-wearing choice for the close clearances a peripheral design runs, turning on a stainless welded 304 and 45# shaft, with an electrophoresis coated body and a copper wound motor. A 0.3 metre cable is fitted and the pump comes in a colour box, which makes it straightforward for a hardware shop to display.\u003c\/p\u003e\u003cp\u003eIt is well matched to boosting pressure for showers and instant heaters, feeding a house from a ground tank, filling an overhead tank, small garden watering and light workshop supply. Pair it with an automatic pump control for hands-free operation.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e peripheral pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 220-240V~50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated power:\u003c\/strong\u003e 370W (0.5HP)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum head:\u003c\/strong\u003e 35m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow:\u003c\/strong\u003e 35L\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum suction:\u003c\/strong\u003e 8m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe diameter:\u003c\/strong\u003e 1 inch x 1 inch\u003c\/li\u003e\n\u003cli\u003eCopper wire motor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShaft:\u003c\/strong\u003e stainless steel welded, 304 and 45#\u003c\/li\u003e\n\u003cli\u003eElectrophoresis pump body\u003c\/li\u003e\n\u003cli\u003eBrass impeller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable length:\u003c\/strong\u003e 0.3m\u003c\/li\u003e\n\u003cli\u003eSupplied in a colour box\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMTOP","offers":[{"title":"Default Title","offer_id":43181261160519,"sku":"EWPPV03701","price":7150.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/EWPPV03701_001066.jpg?v=1788987605"},{"product_id":"dayliff-ddp-60e-econo-peripheral-water-pump-0-37kw","title":"Dayliff DDP 60E Econo Peripheral Water Pump 0.37kW","description":"\u003cp\u003ePeripheral pumps develop useful pressure from a small motor, and the Dayliff DDP 60E is the Econo build in that family, supplied in the familiar yellow colour. It is meant for small scale domestic and commercial water supply, where a modest flow at reasonable pressure is what the installation actually needs.\u003c\/p\u003e\u003cp\u003eThe pump body is cast iron with a brass impeller, and the specification includes copper windings and stainless steel housing inserts that keep the impeller turning freely. Close coupling to a TEFC electric motor designed for continuous operation keeps the unit compact, and a thermal cutout protects against electrical overload. The pump handles thin, clean, chemically non aggressive liquids without solid particles or fibres, so it should be kept off silty water.\u003c\/p\u003e\u003cp\u003eIt is used for boosting taps and showers, filling roof tanks from ground storage, and general small scale supply in houses, flats and shops.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 0.37 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent:\u003c\/strong\u003e 1.8 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInlet and outlet:\u003c\/strong\u003e 1 inch and 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 254 x 118 x 150 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.4 kg\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183217803335,"sku":"DAYLIFF-DDP-60-E-ECONO-YELLOW","price":5420.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_DDP_60_E_ECONO_YELLOW_000663.jpg?v=1789024208"},{"product_id":"dayliff-db-2s30-water-pump-for-water-supply-duties","title":"Dayliff DB 2S30 Water Pump for Water Supply Duties","description":"\u003cp\u003eThe Dayliff DB 2S30 is stocked under the factory code that identifies it within the Dayliff pump range. Like the rest of that range it is intended for water supply duty, lifting water from a source and delivering it to storage or on to a distribution point on a domestic, agricultural or light commercial site.\u003c\/p\u003e\u003cp\u003eNo performance figures are quoted on this page for this code. Anyone matching the pump to a known duty should check the head, flow, motor rating and connection sizes against the current Dayliff datasheet or the pump's own model plate before ordering.\u003c\/p\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183227207751,"sku":"DAYLIFF-DB-2S30","price":45200.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_DB_2S30_000612.jpg?v=1789024508"},{"product_id":"dayliff-ddc-158e-econo-centrifugal-water-pump-0-75kw","title":"Dayliff DDC 158E Econo Centrifugal Water Pump 0.75kW","description":"\u003cp\u003eThe Dayliff DDC 158E is a centrifugal non self priming closed impeller pump for small scale domestic and commercial water supply, and it is at its best on boosting and transfer work where the pump sits below or level with the water it is moving.\u003c\/p\u003e\u003cp\u003eBody construction is cast iron. The Econo build differs from the standard DDC 158 in being of lighter construction and in using a stainless steel impeller rather than brass. The pump is close coupled to a TEFC electric motor rated for continuous operation and fitted with a thermal cutout against electrical overload, and it can be connected straight to the mains through a fuse or MCB. Being non self priming, it needs a flooded suction or a primed line to start reliably.\u003c\/p\u003e\u003cp\u003eIt is used for boosting pressure to upper floors, transferring water from ground tanks to roof tanks, and general supply duty in houses, shops and small commercial premises.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 0.75 kW (1 HP)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent:\u003c\/strong\u003e 4.5 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInlet and outlet:\u003c\/strong\u003e 1 inch and 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 305 x 180 x 240 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 12 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 2900 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply:\u003c\/strong\u003e 1 x 240 V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure class:\u003c\/strong\u003e IP44, insulation class F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum fluid temperature:\u003c\/strong\u003e 60 degrees C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum suction lift:\u003c\/strong\u003e 7 m at sea level\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183247360071,"sku":"DAYLIFF-DDC-158E","price":13310.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_DDC_158E_003674.jpg?v=1789024810"},{"product_id":"dayliff-ddg-1000-self-priming-domestic-pump-0-8kw","title":"Dayliff DDG 1000 Self Priming Domestic Pump 0.8kW","description":"\u003cp\u003eSelf priming is the point of the Dayliff DDG 1000. The pump is a single stage centrifugal unit that will clear air from its suction line and pull water up to it, which makes it the practical choice for drawing from a sump, a shallow well or a ground level tank that sits below the pump.\u003c\/p\u003e\u003cp\u003eBody, shaft and back plate are stainless steel, with a polypropylene impeller. A handle is moulded in for portability, so the pump can be carried to the job and set down where it is needed, and a priming screw and drain plug are provided for filling and emptying the casing. The motor is a close coupled TEFC type with built in thermal overload protection, connected to the mains through a fuse or MCB, and Dayliff recommends additional protection where voltage fluctuation is a risk.\u003c\/p\u003e\u003cp\u003eIt suits small scale irrigation, water boosting and general transfer around houses, gardens and small premises.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 0.8 kW (1 HP)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent:\u003c\/strong\u003e 2.5 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (H x L x W):\u003c\/strong\u003e 244 x 336 x 201 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 2900 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply:\u003c\/strong\u003e 1 x 240 V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsulation class:\u003c\/strong\u003e B\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum liquid temperature:\u003c\/strong\u003e 35 degrees C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum suction lift:\u003c\/strong\u003e 8 m at sea level\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183247392839,"sku":"DAYLIFF-DDG1000","price":12200.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_DDG1000_000623.jpg?v=1789024811"},{"product_id":"dayliff-ddj-1100-centrifugal-jet-water-pump-1-1kw","title":"Dayliff DDJ 1100 Centrifugal Jet Water Pump 1.1kW","description":"\u003cp\u003eAn integral ejector unit is what gives the Dayliff DDJ 1100 its priming ability, and it is the reason this pump is specified where the water sits well below the pump. It is a centrifugal jet type pump for small scale domestic and commercial water supply, and the larger of the two models in the DDJ range.\u003c\/p\u003e\u003cp\u003eThe pump body is cast iron, with the ejector and impeller made from engineering plastic. Close coupling to a TEFC electric motor rated for continuous duty keeps the assembly compact, and a thermal cutout protects the motor against electrical overload. Connection is direct to the mains through a fuse or MCB. Pumped liquid should be thin, clean and chemically non aggressive, without solid particles or fibres.\u003c\/p\u003e\u003cp\u003eIt is used for drawing from shallow wells and sumps, boosting supply in houses and small commercial buildings, and transferring water into storage where the suction lift defeats an ordinary centrifugal pump.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 1.1 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent:\u003c\/strong\u003e 7 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInlet:\u003c\/strong\u003e 1.25 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 515 x 209 x 218 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 32 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 2900 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply:\u003c\/strong\u003e 1 x 240 V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure class:\u003c\/strong\u003e IP44, insulation class F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum fluid temperature:\u003c\/strong\u003e 50 degrees C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum suction lift:\u003c\/strong\u003e 9 m at sea level\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183247458375,"sku":"DAYLIFF-DDJ-1100","price":35600.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_DDJ_1100_000624.jpg?v=1789024812"},{"product_id":"dayliff-ddj-750-centrifugal-jet-water-pump-0-75kw","title":"Dayliff DDJ 750 Centrifugal Jet Water Pump 0.75kW","description":"\u003cp\u003eShallow wells, sumps and low lying tanks are the working ground of the Dayliff DDJ 750. It is a centrifugal jet type pump with an integral ejector unit, which is what lets it prime itself and pull water from a source set well below the pump, and it is the smaller of the two DDJ models.\u003c\/p\u003e\u003cp\u003eCast iron makes up the pump body, while the ejector and impeller are engineering plastic. The pump is close coupled to a TEFC electric motor built for continuous running, with a thermal cutout guarding against electrical overload, and it connects directly to the mains through a fuse or MCB. Water pumped should be thin, clean and chemically non aggressive, free of solid particles and fibres.\u003c\/p\u003e\u003cp\u003eHouseholds, small guest houses, shops and light commercial premises use it for supply, boosting and filling storage where suction lift rules out a plain centrifugal pump.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 0.75 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent:\u003c\/strong\u003e 5.2 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInlet:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 435 x 191 x 200 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 17 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 2900 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply:\u003c\/strong\u003e 1 x 240 V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure class:\u003c\/strong\u003e IP44, insulation class F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum fluid temperature:\u003c\/strong\u003e 50 degrees C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum suction lift:\u003c\/strong\u003e 9 m at sea level\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183247491143,"sku":"DAYLIFF-DDJ-750","price":20690.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_DDJ_750_000625.jpg?v=1789024812"},{"product_id":"dayliff-ddp-50a-pump-for-buf4-ultrafiltration-plants","title":"Dayliff DDP 50A Pump for BUF4 Ultrafiltration Plants","description":"\u003cp\u003eDayliff specifies the DDP 50A as the pump fitted to the smaller units in its BUF4 ultrafiltration range, where one high efficiency pump covers feed, backwash and cleaning duty. On those plants it works with an integral Brio pump controller providing auto switching and dry run protection.\u003c\/p\u003e\u003cp\u003eThe DDP designation is the one Dayliff uses across its compact single phase domestic pump range, so the unit is a small pump intended for continuous light duty rather than heavy transfer work. Published Dayliff data for this pump appears only in the context of the treatment plants it is built into, so no standalone performance figures are quoted here.\u003c\/p\u003e\u003cp\u003eIt is bought as a replacement or spare for a BUF4 ultrafiltration system, and by installers matching a small pump to a filtration or dosing skid. Check the duty required against the plant documentation before ordering.\u003c\/p\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183247556679,"sku":"DAYLIFF-DDP-50A","price":14780.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_DDP_50A_000626.jpg?v=1789024813"},{"product_id":"dayliff-ddc-158-centrifugal-water-pump-1hp-cast-iron","title":"Dayliff DDC 158 Centrifugal Water Pump 1HP Cast Iron","description":"\u003cp\u003eListed by the supplier at 1HP, the Dayliff DDC 158 is the standard build in Dayliff's DDC family of centrifugal non self priming closed impeller pumps, sitting between the lighter Econo version and the larger DDC 170. Published Dayliff data does not break this exact listing out on its own, so no performance figures are quoted here.\u003c\/p\u003e\u003cp\u003eWhat the family shares is a cast iron pump body with a brass impeller, close coupled to a TEFC electric motor designed for continuous operation and protected by a thermal cutout against electrical overload. The motor connects directly to the mains through a fuse or MCB. As a non self priming design, the pump wants a flooded suction or a primed line, and it handles thin, clean, chemically non aggressive water.\u003c\/p\u003e\u003cp\u003eUsual duties are pressure boosting within a building, transfer from ground storage to roof tanks, and general water supply on domestic and small commercial premises.\u003c\/p\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183247589447,"sku":"DAYLIFF-DDC158-1HP","price":16010.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_DDC158_1HP_000627.jpg?v=1789024813"},{"product_id":"dayliff-ddp-60-peripheral-water-pump-0-5hp-0-37kw","title":"Dayliff DDP 60 Peripheral Water Pump 0.5HP 0.37kW","description":"\u003cp\u003eStandard specification in Dayliff's DDP peripheral range, the DDP 60 is listed by the supplier at 0.5HP and is built for small scale domestic and commercial water supply. A peripheral impeller suits it to duties that call for pressure more than volume, such as pushing water up to a roof tank or lifting shower performance.\u003c\/p\u003e\u003cp\u003eConstruction is a cast iron pump body with a brass impeller, copper motor windings and stainless steel housing inserts that keep the impeller free to turn. The motor is a close coupled TEFC type rated for continuous operation, with a thermal cutout to protect it against electrical overload, and it connects directly to the mains supply. Pumped water should be thin, clean and chemically non aggressive, without solid particles or fibres.\u003c\/p\u003e\u003cp\u003eHouses, flats, shops and small workshops use it for boosting, tank filling and general transfer.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 0.37 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent:\u003c\/strong\u003e 2.5 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInlet and outlet:\u003c\/strong\u003e 1 inch and 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 265 x 118 x 151 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5.3 kg\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183254339655,"sku":"DAYLIFF-DDP60-0-5HP","price":6160.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_DDP60_0_5HP_000628.jpg?v=1789024969"},{"product_id":"dayliff-dds-750-pump-for-duf-ultrafiltration-plants","title":"Dayliff DDS 750 Pump for DUF Ultrafiltration Plants","description":"\u003cp\u003eDayliff lists the DDS 750 as the feed and backwash pump on the smaller plants in its DUF ultrafiltration range. On those systems the pump pushes raw water through the ultrafiltration modules during the filtration cycle and reverses duty to drive the backwash that lifts trapped solids off the membranes.\u003c\/p\u003e\u003cp\u003eBecause the pump appears in Dayliff's published data as a component of the treatment plants rather than as a catalogued pump in its own right, no standalone performance figures are given here. It is a mains powered pump built for continuous process duty within a skid mounted, automated treatment plant.\u003c\/p\u003e\u003cp\u003eIt is bought as a replacement or spare for a Dayliff DUF plant, and by water treatment contractors building or servicing filtration skids. Confirm the required duty against the plant documentation, or against the pump's own model plate, before ordering.\u003c\/p\u003e","brand":"DAYLIFF","offers":[{"title":"Default Title","offer_id":43183254405191,"sku":"DAYLIFF-DDS-750","price":37320.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/DAYLIFF_DDS_750_000629.jpg?v=1789024969"},{"product_id":"pedrollo-f40-250a-end-suction-centrifugal-pump-15kw","title":"Pedrollo F40\/250A End Suction Centrifugal Pump 15kW","description":"\u003cp\u003eRated at 15kW, the Pedrollo F40\/250A is an end suction centrifugal pump from the F Series, a close coupled design with flanged connections built for moving large volumes of water continuously.\u003c\/p\u003e\u003cp\u003ePumps of this size are put to work on industrial process water, irrigation mains, water treatment transfer, cooling circuits and pressure boosting for larger buildings. A three phase supply with a remote starter and thermal overload protection is required, and the pump should be installed on a flooded or short suction with the pipework independently supported.\u003c\/p\u003e","brand":"PEDROLLO","offers":[{"title":"Default Title","offer_id":43183256043591,"sku":"PEDROLLO-F40-250A-15KW","price":623030.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/PEDROLLO_F40_250A_15KW_004906.jpg?v=1789025017"},{"product_id":"pedrollo-f50-160a-centrifugal-pump-7-5kw-flanged","title":"Pedrollo F50\/160A Centrifugal Pump 7.5kW Flanged","description":"\u003cp\u003ePedrollo F50\/160A is a close coupled end suction centrifugal pump with flanged inlet and outlet, built for high volume duty where a large flow has to be moved continuously. The hydraulic end follows the dimensions set out in DIN 24255, so it interchanges with other pumps built to that standard.\u003c\/p\u003e\u003cp\u003eCasing and back plate are cast iron with a brass alloy impeller and a ceramic and graphite mechanical seal. A back pull out layout lets the rotating assembly be withdrawn for service without breaking the casing away from the pipework. Drive is by a close coupled fan cooled TEFC induction motor, non-overloading and rated for continuous duty; being three phase, it needs a remote starter with thermal overload wired to local regulations.\u003c\/p\u003e\u003cp\u003eIndustrial process water, irrigation mains, water treatment transfer, cooling circuits and building services boosting all suit a pump of this size. The pumped liquid should be thin, clean and chemically non-aggressive, without solids or fibres.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor power:\u003c\/strong\u003e 7.5 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent:\u003c\/strong\u003e 15.5 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 3 x 380-415 V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 2900 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuction connection (DN1):\u003c\/strong\u003e 65 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDischarge connection (DN2):\u003c\/strong\u003e 50 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 535 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 340 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth (W1 and W2):\u003c\/strong\u003e 273 mm and 265 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 57.6 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure and insulation class:\u003c\/strong\u003e IP44 and class F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum fluid temperature:\u003c\/strong\u003e +90 degrees C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum ambient temperature:\u003c\/strong\u003e +40 degrees C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum suction lift:\u003c\/strong\u003e 7 m at sea level\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PEDROLLO","offers":[{"title":"Default Title","offer_id":43183257157703,"sku":"PEDROLLO-F50-160A","price":331720.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/3011\/1559\/files\/PEDROLLO_F50_160A_005305.jpg?v=1789025054"}],"url":"https:\/\/ahihqtraders.com\/collections\/water-pumps.oembed?page=2","provider":"AHIHQ Traders","version":"1.0","type":"link"}