50W LED Flood Light IP65 Die-Cast Aluminium

The 5110A50-01 is a 50W mains-powered LED flood light for gates, yards and small compounds that already have an AC supply. It is the size installers reach for when replacing a halogen flood on a wall or a short pole, and it suits shopkeepers, landlords and homeowners lighting an entrance, a parking bay or a back yard.

Fifty 3030 LEDs sit behind the front glass at a rated 160 lm/W, with a colour rendering index above 70Ra and a stated LED life span of 50,000 hours. Colour temperature spans 3000K warm white through to 6000K daylight, so the same fitting can be specified for a welcoming frontage or a working area. The housing is die-cast aluminium, which pulls heat away from the LED board and takes outdoor knocks, and the fitting is sealed to IP65 against dust and driven rain. It runs on AC 100-240V at 50Hz with a power factor of 0.95 or higher.

Measuring 230 x 183 x 65 mm, it mounts neatly at the 3-5 m height the manufacturer recommends: a wall bracket, a gable or a low pole. Typical jobs include security lighting over a shop door, lighting a loading bay, washing a compound wall or picking out signage. The manufacturer states a warranty of 3 years.

Specifications

• Power: 50W
• LED chip: 3030 LED, 50 pieces
• Colour temperature: 3000K-6000K
• Efficacy: 160 lm/W
• Colour rendering index: above 70Ra
• LED life span: 50,000 hours
• Input voltage: AC 100-240V, 50Hz
• IP rating: IP65
• Power factor: 0.95 or higher
• Material: die-cast aluminium
• Lamp size: 230 x 183 x 65 mm
• Recommended install height: 3-5 m
• Warranty: manufacturer's stated warranty of 3 years