Dayliff DDG 1000 Self Priming Domestic Pump 0.8kW

Self priming is the point of the Dayliff DDG 1000. The pump is a single stage centrifugal unit that will clear air from its suction line and pull water up to it, which makes it the practical choice for drawing from a sump, a shallow well or a ground level tank that sits below the pump.

Body, shaft and back plate are stainless steel, with a polypropylene impeller. A handle is moulded in for portability, so the pump can be carried to the job and set down where it is needed, and a priming screw and drain plug are provided for filling and emptying the casing. The motor is a close coupled TEFC type with built in thermal overload protection, connected to the mains through a fuse or MCB, and Dayliff recommends additional protection where voltage fluctuation is a risk.

It suits small scale irrigation, water boosting and general transfer around houses, gardens and small premises.

Specifications

• Motor: 0.8 kW (1 HP)
• Current: 2.5 A
• Dimensions (H x L x W): 244 x 336 x 201 mm
• Speed: 2900 rpm
• Supply: 1 x 240 V
• Insulation class: B
• Maximum liquid temperature: 35 degrees C
• Maximum suction lift: 8 m at sea level