EMTOP 2-in-1 Combo Brad Nailer and Stapler ECBN504001

Two fastening tools in one body, this pneumatic combo unit drives 18-gauge brad nails and narrow crown staples from the same magazine. Joiners, shopfitters and furniture makers use it for skirting and architrave, beading and trim, cabinet backs, drawer bottoms and light upholstery work, where a hammer would mark the timber and a screw would be too coarse.

The magazine holds 100 fasteners, so runs of trim can be completed without constant reloading. Brads from 15mm to 50mm and staples from 16mm to 40mm are accepted, both in 18 gauge at 1.25 x 1.0mm wire, with a 5.7mm staple crown. Four connector types are included in the box, covering European, American, Nitto and Italian couplings, so the tool can be plugged straight into whichever hose fitting the workshop already runs. Working pressure is 0.4 to 0.7Mpa, well within the range of a small portable compressor.

A starter supply of 1000 brad nails and 200 staples comes with the tool, enough to get through a first job before a bulk pack is needed.

Specifications

• Magazine capacity: 100 fasteners
• Brad size: 15-50mm, 18 gauge, 1.25 x 1.0mm
• Staple size: 16-40mm, 18 gauge, 1.25 x 1.0mm
• Staple crown: 5.7mm
• Operating pressure: 0.4-0.7Mpa (60-100Psi)
• Supplied with European, USA, Nitto and Italian connectors
• Supplied with 1000 brad nails and 200 staples