EMTOP 3 in 1 Staple Gun with Staples and Brads ESGU1001

Upholsterers, signwriters, carpenters and electricians all reach for a staple gun, but rarely for the same fastener. The EMTOP ESGU1001 handles three, taking flat crown staples, U-shape staples for running cable, and brad nails for light pinning, so one tool covers fabric, board and wiring work.

Driving force can be adjusted, letting you set the blow to suit soft pine or dense hardwood without over-driving the fastener or leaving it proud. Flat staples take 1.2mm wire on an 11.3mm crown in lengths from 4 to 14mm; U-shape staples use 1.2mm wire on a 6.3mm crown at 10 to 12mm; brad nails are 1.2mm wire at 10 to 14mm. The gun is supplied with 200 of each type, and refills are available as EMTOP ENAL0210 staples, ENAL0310 brad nails and ENAL0412 U-shape staples.

Typical work includes re-covering chairs and seats, fixing insulation, felt and mesh, tacking thin trim and picture frames, and securing low-voltage or speaker cable along a run.

Specifications

• Model: ESGU1001
• Type: 3 in 1 staple gun with adjustable driving force
• Staples: wire 1.2mm, crown 11.3mm, length 4-14mm
• U-shape staples: wire 1.2mm, crown 6.3mm, length 10-12mm
• Brad nails: wire 1.2mm, length 10-14mm
• Included: 200 staples, 200 U-shape staples, 200 brad nails
• Matching consumables: ENAL0210 staples, ENAL0310 brad nails, ENAL0412 U-shape staples