EMTOP 4 Inch Deep Well Pump 1100W 1.5HP 112m EWPPD11001
Supplied 0 per carton
Tell us your quantities and delivery point and we will come back with landed pricing. Your product carries over to the quote form.
We have not published a price for this option yet. Tell us the quantity you need and we will come back with one. Your product carries over to the quote form.
About this product
Deeper boreholes and long uphill delivery runs need real pressure behind the water. Rated 1100W, or 1.5 horsepower, this EMTOP 4 inch deep well pump reaches a maximum head of 112 metres, which covers most residential and light commercial bores in the region.
Fourteen impeller stages produce that lift, each adding its share of pressure, while maximum flow stays at 6.0 cubic metres per hour through the 1-1/4 inch outlet. The motor is copper wound and the pump body is stainless, chosen for permanent immersion in a 4 inch casing, and 20 metres of cable come fitted so the installer can reach the wellhead without an early splice. Order the matching control box separately.
Consider it for deep domestic boreholes, apartment blocks and gated developments, farm irrigation, greenhouses, hotels and lodges, and any site where water must climb to a high tank. Size the pump against the tested yield of the bore before ordering.
Specifications
- Voltage: 220-240V~50Hz
- Rated power: 1100W (1.5HP)
- Maximum head: 112m
- Maximum flow: 6.0 cubic metres per hour
- Pipe diameter: 1-1/4 inch
- Well pump body: 4 inch
- Impeller: 14 stage
- Copper wire motor
- Pump body: stainless
- Cable length: 20m
- Control box not included
- Supplied in a carton box
Specifications
Detailed specifications for this product are not published yet. Request technical information.