EMTOP AC Clamp Meter 1000A 6000 Counts EDMR210001

High-capacity AC clamp meter reading up to 1000A, aimed at technicians working on generators, submains, pumps, motors and industrial distribution. The 6000-count display resolves small changes that a 2000-count instrument would round away.

Beyond current, the meter covers AC voltage from 60mV up to 750 V and DC voltage up to 1000 V, resistance to 60 megohms, capacitance from 10nF to 100mF and frequency from 0 to 10kHz. That range turns one instrument into a general test set for supply checks, motor capacitor testing and drive troubleshooting.

A backlit display and a built-in flash light make readings possible inside a dark switchroom or plant room. Three LR03 AAA batteries are supplied, and the meter is delivered in a colour box. Centre the conductor in the jaw for the most consistent reading and keep the jaw faces clean so they close fully. Where a supply cannot be proven dead, treat every conductor as live and follow the site's own safe isolation procedure.

Specifications

• 6000 counts
• Data hold
• AC current: 60A / 600A / 1000A, accuracy +/-(2.0% + 6)
• AC voltage: 60mV / 600mV / 6V / 60V / 600V, accuracy +/-(0.8% + 3); 750V, accuracy +/-(1% + 4)
• DC voltage: 60mV / 600mV / 6V / 60V / 600V, accuracy +/-(0.7% + 3); 1000V, accuracy +/-(0.8% + 2)
• Resistance: 600 ohm / 6k / 60k / 600k / 6M, accuracy +/-(0.8% + 3); 60M, accuracy +/-(1.2% + 3)
• Capacitance: 10nF / 100nF / 1000nF / 10uF / 100uF / 1000uF / 10mF / 100mF, accuracy +/-(4.0% + 5)
• Frequency: 0-10kHz, accuracy +/-(1.5% + 5)
• Backlight and flash light
• Supplied with 3 LR03 AAA batteries
• Packed in a colour box