EMTOP Angle Grinder 2000W 180mm Disc M14 EAGR20073

Stepping up to a 180mm disc buys depth of cut and a longer working edge, and 2000W keeps that larger disc turning at 8450rpm under load. This is the grinder for cutting section steel and reinforcing bar, dressing long weld seams and taking down concrete high spots, where a small machine would stall or run out of reach.

The motor runs from a 220-240V supply and drives an M14 spindle, standard for cutting, grinding and flap discs across the market. A side handle is supplied and fits either side of the gearhead so the tool can be braced properly with both hands. A spare set of carbon brushes is included in the box: brushes are the usual wear item on a hard-working grinder, and having the replacement pair to hand keeps the machine earning instead of waiting for parts. Discs are not supplied.

Steel fabricators, structural crews, demolition contractors and stone and concrete cutters are the natural users. Packed in a colour box.

Specifications

• Model: EAGR20073
• Voltage: 220-240V~50/60Hz
• Input power: 2000W
• No-load speed: 8450rpm
• Disc diameter: 180mm
• Spindle thread: M14
• Supplied with 1 auxiliary handle
• Supplied with 1 set of extra carbon brushes
• Disc not included
• Packed in a colour box