EMTOP Angle Grinder 2200W 230mm Disc M14 EAGR22093

A 230mm grinder is a cutting machine first and a grinder second. With 2200W behind a 9 inch disc turning at 6600rpm, it takes a full pass through concrete block, paving, kerbing and heavy section steel that smaller machines can only score from both sides.

The motor is wound for 220-240V mains and site generator use, and the M14 spindle matches the cutting and grinding discs stocked everywhere. The auxiliary handle mounts on either side of the head, which is not optional on a tool this size: two hands on the machine is how the torque is controlled. A spare set of carbon brushes comes in the box, so the first service is covered without a trip to a dealer. Discs are chosen and bought separately to suit the material being cut.

Contractors use it for slab and wall chasing, cutting reinforcement, trimming precast units and preparing concrete surfaces, while fabrication shops keep one for heavy stock. It is supplied in a colour box.

Specifications

• Model: EAGR22093
• Voltage: 220-240V~50/60Hz
• Input power: 2200W
• No-load speed: 6600rpm
• Disc diameter: 230mm
• Spindle thread: M14
• Supplied with 1 auxiliary handle
• Supplied with 1 set of extra carbon brushes
• Disc not included
• Packed in a colour box