EMTOP Angle Grinder 750W 115mm Disc M14 EAGR07581

The 115mm grinder is the one that gets picked up most often, because it is light enough to hold at arm's length and small enough to reach into a corner. Running 750W at 12000rpm, this machine cuts rebar and angle iron, grinds welds flat, removes rust and paint and trims tile and block with the right disc fitted.

Power comes from a 220-240V supply, so it runs on standard mains or a site generator. The M14 spindle accepts the common range of cutting, grinding and flap discs and wire cups sold locally, and an auxiliary handle screws into either side of the head for left or right-handed working and for the two-handed control that heavier grinding demands. No disc is supplied, which lets you match the abrasive to the material rather than paying for one you will not use.

Fabricators, welders, plumbers cutting pipe, tilers and steel fixers all keep a machine of this size on the bench. It is packed in a colour box.

Specifications

• Model: EAGR07581
• Voltage: 220-240V~50/60Hz
• Input power: 750W
• No-load speed: 12000rpm
• Disc diameter: 115mm
• Spindle thread: M14
• Supplied with 1 auxiliary handle
• Disc not included
• Packed in a colour box