EMTOP Automatic Pump Control 10A IP65 1 Inch EAPC1001

Fitting a pressure controller turns an ordinary booster pump into an automatic water system. This EMTOP automatic pump control starts the pump when a tap opens and stops it when demand ends, removing the need for a pressure vessel and a separate switch, and cutting the pump out if flow is lost.

It works on a 220-240V supply at 50/60Hz, starts at 1.5 bar and handles pumps drawing up to 1100W, with a maximum current of 10A and a maximum working pressure of 10 bar. Connections are 1 inch by 1 inch, so it fits inline on the delivery side of most domestic booster pumps. The housing is rated IP65 against dust and water jets, which matters for a unit that usually lives in a pump house or an outdoor enclosure.

Use it on domestic pressure boosting, tank to house delivery, shower and instant heater supply, small irrigation lines and light commercial water systems.

Specifications

• Rated voltage: 220-240V
• Frequency: 50/60Hz
• Starting pressure: 1.5 bar
• Maximum power allowed: 1100W
• Maximum current: 10A
• Maximum pressure: 10 bar
• Pipe diameter: 1 inch x 1 inch
• Protection degree: IP65
• Supplied in a colour box