EMTOP Automatic Water Pump Pressure Controller EAPC1201

Constant pressure at the tap, without a bladder tank taking up half the pump house, is what a controller like this delivers. The EMTOP EAPC1201 senses flow and pressure on the delivery line, starting the pump on demand and shutting it down when the taps close or the supply runs dry.

Electrically it takes 220-240V at 50/60Hz and will switch pumps drawing up to 1100W, with a 10A maximum current. Starting pressure is set at 1.5 bar and the unit is rated to 10 bar maximum, with 1 inch by 1 inch connections that thread straight into a standard delivery line. An IP65 enclosure keeps dust and splashing water out of the electronics in an exposed pump house.

Fit it to household booster sets, tank-fed plumbing that needs more pressure upstairs, borehole surface pumps, car wash and workshop supply, and small irrigation systems where automatic operation saves someone switching the pump by hand.

Specifications

• Rated voltage: 220-240V
• Frequency: 50/60Hz
• Starting pressure: 1.5 bar
• Maximum power allowed: 1100W
• Maximum current: 10A
• Maximum pressure: 10 bar
• Pipe diameter: 1 inch x 1 inch
• Protection degree: IP65
• Supplied in a colour box