EMTOP Heat Gun 2000W 3 Temperature Steps EHGN20001

Three temperature steps make this the more flexible of EMTOP's heat guns. The EHGN20001 offers 50, 380 and 570 degrees Celsius, so the same tool blows cool air to set a joint and then runs hot enough to lift old paint. Electricians, plumbers, decorators and vehicle trimmers all keep one to hand.

The 2000W element is fed by airflow of 500, 300 and 500 litres per minute across the settings, and the gun runs from a 220-240V supply. Four nozzles are supplied to direct that heat where it is wanted: a reduction nozzle for concentrating on a small area, two reflector nozzles for wrapping heat around pipe and cable, and a flat nozzle for spreading it across a panel. A scraper is included for taking softened coatings off as they lift.

Use it to shrink heatshrink sleeve and cable joints, strip paint and varnish from timber and metal, soften adhesive, sealant and vinyl, thaw frozen pipework, bend plastic pipe and sheet, and dry damp surfaces before finishing.

Specifications

• Voltage: 220-240V~50/60Hz
• Input power: 2000W
• Temperature settings: 50C / 380C / 570C
• Airflow: 500 / 300 / 500 litres per minute
• Includes 1 reduction nozzle
• Includes 2 reflector nozzles
• Includes 1 flat nozzle
• Includes 1 scraper
• Supplied in a colour box