EMTOP Submersible Clean Water Pump 750W 1HP EWPPS07501

Stepping up from the half horsepower model, this EMTOP submersible pump is rated 750W and pushes water to a maximum head of 32 metres at up to 120 litres per minute. It is the size to choose when the discharge point is well above the tank or the run of hose is long.

The pump is intended for clean water and comes with a float switch, so it can be left to empty a tank and switch itself off before running dry. Thermal protection guards the copper wound motor against overheating, and the base, screws and shaft are stainless steel for long immersion. A 1 inch outlet takes standard hose or pipe fittings, and 9 metres of cable give reach down into a deep tank or pit.

Typical uses include tank cleaning and transfer, borehole and reservoir top-up, drainage of pits and basements, construction site water clearing, and pumping between storage tanks on farms and compounds.

Specifications

• Voltage: 220-240V~50Hz
• Rated power: 750W (1.0HP)
• Maximum head: 32m
• Maximum flow: 120L/min
• Pipe diameter: 1 inch
• Cable length: 9m
• Copper wire motor
• Stainless steel base, screws and shaft
• Thermal protection
• Fitted with a float switch
• For clean water
• Supplied in a carton box