EMTOP Wet and Dry Vacuum 1400W 30L Stainless EVCR1401

A power tool socket is the feature that makes this 1400W vacuum genuinely useful on site. Plugging a sander, router or wall chaser into the machine starts extraction automatically with the tool, so dust is collected at source instead of settling over the whole room.

The 30 litre stainless steel tank strikes a balance between capacity and portability, holding a decent volume of debris while still fitting in a vehicle. Suction runs at 16 to 18KPa with an airflow of 1.9 cubic metres per minute, drawn through a HEPA filter that captures the fine particles produced by cutting and sanding.

Wet and dry pick-up are both supported, and the machine comes with a flexible hose, a floor brush and a set of plastic tubes. Joiners, plasterers, tilers and building maintenance teams are the natural users.

Specifications

• Voltage: 220V-240V~50/60Hz
• Input power: 1400W
• Air flow: 1.9CBM/min
• Vacuum pressure: 16-18KPa
• Dust capacity: 30L
• Tank material: stainless steel
• HEPA filter
• Power tools socket
• Wet and dry cleaning
• Power cable: 1.8m
• Supplied with flexible hose, floor brush and plastic tube set