MAX LED Downlight M-DLQ51 COB 7W to 30W Recessed White

Shop fit-outs, hotel corridors and residential ceilings all use the same trick: a run of small recessed downlights doing the work of one large fitting. The MAX M-DLQ51 range is built for that job, and this listing covers the family from the 7W unit upward.

Each fitting is die-cast aluminium with a six-step inclined inner ring, powder or oil sprayed at the surface, and an aluminium nail-type heat sink behind it. A square chrome-plated reflector cup sits under clear glass with a white dot screen print at the centre, softening the point source. The cable outlet uses a black press-wire buckle fixed with a screw to resist pulling, and the driver is an external non-isolated constant current type in a grey and white housing. Supply is AC220-240V 50/60Hz with tolerance from AC175-265V, surge protection at 2KV and a power factor above 0.5. The 7W unit gives 490 lumens from a 91mm body into a 70mm ceiling hole.

Wattages run 7W, 10W, 15W, 20W and 30W, and several sizes are also offered in a warm white version alongside the standard finish.

Specifications

• Model: M-DLQ5107R (M-DLQ51 series)
• Power options: 7W, 10W, 15W, 20W, 30W
• Luminous flux: 490Lm at 7W
• LED type: COB
• Voltage: AC220-240V 50/60Hz
• Operating voltage: AC175-265V
• CRI: 70 or above
• Beam angle: 120 degrees
• Power factor: above 0.5
• Surge protection: 2KV
• Life: 15000 hours
• Material: Aluminium, glass and PC
• Body size: 91mm diameter x 40mm (7W)
• Cut-out: 70mm (7W)
• Colour temperature: warm white option available