MAX LED Dust-proof Bracket M-PD120A 100W-120W 1200mm

Where an open batten would fill with dust, insects and spray, a sealed fitting is the right answer. The M-PD120A is a 1200mm dust-proof LED bracket built for car wash bays, workshops, factory floors, stores and covered parking, and it is bought mainly by contractors fitting out working buildings rather than homes.

The body is iron with a plastic diffuser section and is designed to keep dust, water and mosquitoes out of the optical chamber, which is what keeps output from falling away over a season of use. Heat dispersion is handled across the length of the housing so the diodes are not sitting in a hot pocket. Light is SMD, spread at 120 degrees, and the fitting is offered with a clear or diffuse cover. Mounting is quick: mark the position, fix the buckles with screws, then press the lamp body into the buckles.

Available in 100W and 120W, so a single housing style can cover both general shed lighting and higher-level bays. Runs on AC220-240V with an operating range from 175V to 265V and is produced in 3000K and 6500K.

Specifications

• Series: M-PD120A
• Wattage options: 100W, 120W
• Voltage: AC220-240V 50/60Hz (operating range AC175-265V)
• CRI: 70 or above
• Beam angle: 120 degrees
• LED type: SMD
• Power factor: Greater than 0.5
• Colour temperature: 3000K / 6500K
• Material: Iron and plastic
• Body size (M-PD120A-70 reference): 1200 x 63 x 29mm
• Cover: Clear or diffuse