MAX LED T8 Integrated Bracket M-T8120S-40Y 40W 1180mm

The M-T8120S-40Y replaces the old tube-and-fitting arrangement with a single integrated 40W bracket, 1180mm long, ready to screw to a ceiling or soffit. Shops, offices, corridors and light industrial spaces use it as the standard general-lighting line because there is no separate tube to source or replace.

Body construction is iron and plastic with a diffuse cover in white, and the fitting is built to link end to end using in-line connectors, so an installer can run a continuous illuminated line down a corridor or over a shop floor instead of leaving gaps between separate battens. High quality LED chips are used to lift lumen output and extend service life. Rated output is 2800 lumens at a 120 degree beam with colour rendering of 70 or above, and quoted life is 15,000 hours at an ambient of 45 degrees Celsius. The series is produced in 3000K, 4000K and 6500K.

Fitting is quick: mark the position, screw the buckles down, then press the body into place. Suited to retail interiors, offices, stores, workshops, staircases, kitchens and covered walkways.

Specifications

• Model: M-T8120S-40Y
• Power: 40W
• Luminous flux: 2800lm
• Voltage: AC220-240V 50/60Hz (operating range AC175-265V)
• CRI: 70 or above
• Beam angle: 120 degrees
• LED type: SMD
• Power factor: Greater than 0.5
• Life: 15,000 hours
• Material: Iron and plastic
• Size: 1180 x 32 x 35mm
• Colour temperature: 3000K / 4000K / 6500K
• Finish: Diffuse cover, white