MODI Pendant Wire Set MD-HWW3001 E27 Holders 5m-100m

The MD-HWW3001 is a pre-wired run of E27 lamp holders on a single PVC-sheathed cable, supplied ready to hang. It removes the fiddliest part of setting up temporary or festoon lighting: instead of terminating every holder on site, the run comes made up, and the installer only has to fix it and connect the supply.

Cable and holders are PVC over copper conductors, rated for a 220-240V 50/60Hz supply. Holder spacing is fixed along the run, and the four lengths keep a consistent ratio of roughly two holders per metre, so a 5m set carries ten E27 holders and a 100m set carries two hundred.

It suits construction sites needing temporary task lighting between floors, event and marquee installations, market stalls and covered walkways, and workshop or store lighting where a permanent conduit run would be hard to justify. Lamp choice is left open, so the same wire set can carry filament, LED or coloured lamps depending on the job. Supplied in cartons of twenty for the 5m set down to single units for the 100m run.

Specifications

• Model: MD-HWW3001
• Input voltage: AC220-240V 50/60Hz
• Material: PVC and copper
• Lamp holder: E27
• Lengths: 5m (10 holders), 10m (20), 20m (40), 100m (200)
• Rating: 8A